gofanco PRO-SDIGen 12G-6G-3G-HD-SD-SDI Pattern Generator With Led Monitor User Guide

gofanco PRO-SDIGen 12G-6G-3G-HD-SD-SDI Pattern Generator With Led Monitor

Safety and Notice

Please read all of these instructions carefully before you use the device. Save this manual for future reference.
The PRO-SDIGen 12G/6G/3G/HD/SD-SDI Pattern Generator with LED monitor has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the PRO-SDIGen should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the po-wer to the device before cleaning.

Introduction

The PRO-SDIGen 12G/6G/3G/HD/SD-SDI Pattern Generator with LED monitor is an advanced SDI pattern generator with multi-format (12G/6G/3G/HD/SD) and multi- pattern support. Besides still and moving video test patterns, other features such as audio (SMPTE-291M) are also provided. PRO-SDIGen can sup-port up to 8 channel AES compliant audio with 48KHz sample rate. PRO-SDI-Gen is equipped with four buttons, one rotary switch and LCD screen for easy device control. This device provides a cost effective way to calibrate and test SDI enable video devices and displays.

Features

• Supported output resolution
  NTSC 525@60, PAL 625@50,
  720p@23.98/50/59.94/60,
  1080i@50/59.94/60,
  1080p@23.97/24/25/29.97/30/50/59.94/60,
  4K2K@23.97/24/25/29.97/30/50/59.94/60

• Bit Rate
  2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps, 5.94Gbps, 5.934Gbps, 11.88Gbps, 11.868Gbps,270 Mbps

• Video Patterns
  100% Color Bars, Borderline, Random Noise, Check Field, Black, Verti-cal Lines, Black / White alternate fields, Full Grey / Full White, Black to White Gradient, Random Generator for all still patterns, moving squa-res White noise, Inverse effect with still pattern, Scrolling Title (see Appendix for illustrations)

• Save Settings to Memory Option

• Control
  By LCM, panel buttons & rotary switch

• Video Output
  SDI output (SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI)

• Supports Preset Modes

Specifications

Technical
Hardware type| Pattern generator
SDI standards| 12G/6G/3G/HD/SD-SDI
Auto SDI

rate detection

| Yes
 | SMPTE 259M (270Mbps / 360Mpbs)
Supported protocols| SMPTE 292M / HDTV (1.485 & 1.485/1.001Gbps) SMPTE 424/425M (2.97 & 2.97/1.001Gbps) SMPTE ST-2081 (5.94&5.94/1.001Gbps)
 | SMPTE ST-2082 (11.88&11.88/1.001Gbps)
Video support| 11.88Gpbs
Audio support| 270 / 1483 / 1485 / 2967 / 2970 / 5934 / 5940 / 11868 / 11880 Mbps
 | [12G] 4K2K@50/59.94/60
 | [6G] 4K2K@23.97/24, 25, 30
Resolution

support

| [3G] 1080p@50/59.94/60 (4:2:2) [HD] 720p50/59.94/60,

1080p24/30, 1035i50/59.94/60,

 | 1080i50/59.94/60
 | [SD] NTSC@59.94Hz, PAL@50Hz
PCB stack-up| SMPTE-292M / 259M / 424M / ST-2081 / ST-2082
Input| 75
Output| [12G-SDI] up to 50m (165ft) / [6G-SDI] up to 100m (330ft) / [3G-SDI] up to 200m (660ft)
HDMI Input

selection

| Yes
IR remote control| 6-layer board [impedance control — differential 100 ; single 75       ]
HDMI connector| 4x BNC [SDI]
RJ-45 connector| 75| interlocking socket
RS-232 connector| Amplitude: Within 800mV <10%Long time jitter <1.0 UI Rise overshoot: Less than 2% Timing jitter <1.0 UI

Fall overshoot: Less than 2% Alignment jitter <0.2 UI

Mechanical

Housing| Metal enclosure
Dimensions

[L x D x H]| Model| 167 x 112 x 24mm[6.5″ x 4.4″ x 0.9″]
Package| 325 x 196 x 92mm[12.7″ x 7.7″ x 3.6″]
Carton| 490 x 426 x 352mm[1’6″ x 1’4″ x 1’2″]
Weight| Model| 303g [0.6 lbs]
Package| 533g [1.1 lbs]
Power supply| 12VDC
Power consumption| 5 Watts [max]
Operation temperature| 0~40°C [32~104°F]
Storage temperature| -20~60°C [-4~140°F]
Relative humidity| 20~90% RH [no condensation]

Package Contents

• 1x PRO-SDIGen
• 1x 12V power supply unit
• 1x User Manual

Panel Description

1. SDI OUT1-2: 12G/6G/3G/HD/SD-SDI output
2. SDI OUT3-4: 3G/HD/SD-SDI outpu
3. Rotary Switch: For 0-7 preset mode
4. LCD: 2.0” LCD monitor
5. PUSH BUTTON:
6.  Micro USB: Micro-USB port for F/W update
7.   +12V DC: 12V DC power jack
8.   Power Switch: Power ON/OFF

Connection Diagram

Notice

1. Due to the high-frequency bandwidth and low jitter requirement of SDI signals, it is strongly recommended to use just one SDI OUTPUT with one 75 ohm.
2. Features such as new timings, test patterns and menu items, due to firmware or other updates is subject to change without further notice.

Appendix

Built-in Video Patterns

Limited Warranty

The SELLER warrants the PRO-SDIGen 12G/6G/3G/HD/SD-SDI Pattern Generator with LED monitor to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjec-ted to accident, disaster, abuse or any unauthorized modifications including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are war-ranted for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorizati-on number.
The warranty is in lieu of all other warranties expressed or implied, including wi-thout limitations, any other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day warranty and cable must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accura-te. However, The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct, indirect, inci-dental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the PRO-SDIGen features and specifications is subject to change without further notice.

Disclaimer
The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user‘s guide. The pictures on the user‘s guide are just for reference, and there may be some slight differences with the actual products.
We reserve the rights to make changes without prior notice to a product or system described herein to improve reliability, function, or design.

References

• gofanco® | Professional & Residential AV/IT Solutions
• Downloads | gofanco

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>