IROAD-X6 Waterproof Dash Camera User Guide
- June 13, 2024
- IROAD
Table of Contents
IROAD-X6 Waterproof Dash Camera
Product Information
| Model | IROAD X6 |
|---|---|
| Image Sensor | Front: Sony STARVIS(IMX307) Image Sensor |
Rear: 2.0 Mega Pixel CMOS Image Sensor
Resolution/Frame| Front: FULL HD 1920x1080p
Rear: FULL HD 1920x1080p
Viewing Angle| Wi-Fi supported
Audio Input| Embedded MIC
Video/Audio| H.264/ADPCM
Vibration Sensor| 3-axis Acceleration Sensor
Voice Guidance| Effect sound/buzz alert to inform the condition of the
device
Voice guidance supported
External GPS| Synched with Google Maps
Records location and speed of the vehicle
Storage Medium| Micro SD 32GB ~ 512GB (Class10)
Recording Mode| Driving, Event(Impact), Parking(Timelapse, Motion
Detection)
Uninterrupted Power| Uninterrupted Power (Low voltage cut-off, overheating
prevention is embedded)
Power Supply| DC 12V/24V
Humidity| 10 ~ 95%
Dedicated PC Viewer| Win7, Win8, Win10 (64Bit), Mac (OS X 11.0 or higher)
Application| Android 6.0, IOS 13.0 or higher: Firmware update
supported
Product Usage Instructions
PRECAUTIONS
- Do not arbitrarily disassemble and modify the product. It will be considered the user’s fault and it will void the warranty.
- Do not handle the product while driving, it can cause serious accidents. (Please operate the product in a safe place after parking.)
- Turn the recorder off when exposed to direct sunlight or used for too long. Otherwise, malfunction or breakdown will occur.
- Do not remove the SD card or turn off the power during the firmware update. It may cause malfunction or loss of data.
- The use of a genuine IROAD memory card is recommended. Failure to use a genuine SD card may cause error or malfunction.
- Real-time recording and playback via Wi-Fi could be delayed depending on the specifications of your smart device.
- Motion detection is initiated by image sensor software. Errors may occur depending on the surrounding environment and the voltage of the car.
- If the GPS signal is good, ADAS will activate when the speed of the car is above the set speed. The surrounding environment may cause errors.
- Incorrect installation of the uninterrupted power cable may cause malfunctions. Installations must be different depending on the power type of the vehicle. (Please contact a professional engineer if you need help installing it)
WARRANTY
| PRODUCT NAME | IROAD X6 |
|---|---|
| SERIAL NUMBER | |
| DATE OF PURCHASE | |
| SUPPLIER | |
| SHOP NAME | |
| CONTACT NUMBER |
IROAD Global guarantees the quality of the item.
Only signed members can use this card. Transferring and lending the card to others is strictly not allowed.
No after-sale service will be provided in case the card is lost.
The warranty period for each part is as follows:
- Product (Front/Rear Camera): 1 Year
- Option Camera (Interior Infrared/External Waterproof Camera): 1 Year
- Memory Card: 6 Months
- Fuse Cable, Rear Cable, Wi-Fi Dongle: Does Not Cover
PACKAGE
Basic Components:
- Front Camera / Cradle
- Rear Camera / Cradle
- Uninterrupted Fuse Cable
- Rear Camera Cable
- IROAD Genuine MicroSD
- Wi-Fi USB Dongle
- User Manual / Warranty
The Basic components may change without prior notice.
PRECAUTIONS
- Do not arbitrarily disassemble and modify the product. It will be considered the user’s fault and it will void the warranty.
- Do not handle the product while driving, it can cause serious accidents. (Please operate the product in a safe place after parking.)
- Turn the recorder off when exposed to direct sunlight or used for too long. Otherwise, malfunction or breakdown will occur.
- Do not remove the SD card or turn off the power during the firmware update. It may cause malfunction or loss of data.
- The use of a genuine IROAD memory card is recommended. Failure to use a genuine SD card may cause error or malfunction.
- Real-time recording and playback via Wi-Fi could be delayed depending on the specifications of your smart device.
- Motion detection is initiated by image sensor software. Errors may occur depending on the surrounding environment and the voltage of the car.
- If the GPS signal is good, ADAS will activate when the speed of the car is above the set speed. The surrounding environment may cause errors.
- Incorrect installation of the uninterrupted power cable may cause malfunctions. Installations must be different depending on the power type of the vehicle. (Please contact a professional engineer if you need help installing it)
WARRANTY
- PRODUCT NAME
- SERIAL NUMBER
- DATE OF PURCHASE
- SUPPLIER
- SHOP NAME
- CONTACT NUMBER
- IROAD Global guarantees the quality of the item.
- Only signed members can use this card. Transferring and lending the card to others is strictly not allowed.
- No after-sale service will be provided in case the card is lost.
- The warranty period for each part is as follows. Product(Front/Rear Camera) : 1 Year
- Option Camera(Interior Infrared/External Waterproof Camera): 1 Year Memory Card: 6 Months Fuse Cable, Rear Cable, Wi-Fi Dongle: Does Not Cover
SPECIFICATIONS
- Model: IROAD X6
- Image sensor: Front: Sony STARVIS(IMX307) Image Sensor Rear: 2.0 Mega Pixel CMOS Image Sensor
- Resolution/Frame: Front: FULL HD 1920x1080p / Rear: FULL HD 1920x1080p
- Viewing angle: 140°
- Wi-Fi supported: Smartphone Playback/Settings, Firmware Automatic Update
- Wi-Fi button: Activate “Stand-by Mode for Registration”
- Audio input: Embedded MIC
- Video/Audio: H.264/ ADPCM
- Vibration Sensor: 3-axis Acceleration Sensor
- Voice guidance: Effect sound/buzz alert to inform the condition of the device Voice guidance supported
- External GPS: Synched with Google Maps Records location and speed of the vehicle
- Storage medium: Micro SD 32GB ~ 512GB (Class10)
- Recording mode: Driving, Event(Impact), Parking(Timelapse, Motion Detection)
- Uninterrupted power: Uninterrupted Power (Low voltage cut-off, overheating prevention is embedded)
- Power supply: DC 12V/24V
- Operating temperature: -20 ~ 70° C (Storage temperature : -30 ~ 80° C)
- Humidity: 10 ~ 95%
- Dedicated PC viewer: Win7, Win8, Win10 (64Bit), Mac (OS X 11.0 or higher)
- Application: Android 6.0, IOS 13.0 or higher: Firmware update supported
PACKAGE
Basic Components
The Basic
components may change without prior notice.
Optional Items
USING THE MOBILE APP
ANDROID DEVICE
- On your Android device, open the “Google Play Store” and download and install “IROAD”
- After running the application, register your device.
- Activate the registration standby mode by pressing the Wi-Fi registration button “Stand-by mode for the registration” (Voice guidance)
- Tap Connect Now
- From the IROAD, select your dashcam.
- The SSID and model will be shown.
- Once the user selects the device, it will be registered & connected.
iOS DEVICE
- On your iOS device, open the “App Store” and download and install “IROAD”
- After running the application, register your device.
- Activate the registration standby mode by pressing the Wi-Fi registration button “Stand-by mode for the registration” (Voice guidance)
- Tap Connect Now and follow the on-screen instructions to connect the product to your smartphone.
- Select the Wi-Fi Network
- From the Wi-Fi setting menu on your smartphone, select the Wi-Fi network starting with “IROAD”
- Enter Password
- Enter “qwertyuiop” in the password field
- Now the product is connected to your iOS device via Wi-Fi
The password is the first row of the alphabet on the keyboard
- Model: IROAD X6
- Product : IROAD DASH CAM IROAD MOBILITY Co., Ltd. Made in Korea
IROAD MOBILITY CO., LTD.
www.iroadkr.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>