IROAD FX1 Car Dash Camera User Manual

FX1 Car Dash Camera
User Manual

PRECAUTIONS

• Do not arbitrarily disassemble and modify the product.
  It should be considered the user’s fault and it will void the warranty.

• Do not handle the product while driving, it can cause serious accidents.
  (Please operate the product in a safe place after parking.)

• Turn the recorder off when exposed to direct sunlight or used for too long.
  Otherwise, malfunction or breakdown will occur.

• Do not remove the SD card or turn off the power cable during the firmware update.
  It may cause malfunction or loss of data.

• Use of a genuine IROAD memory card is recommended.
  Failure to use a genuine SD card may cause an error or malfunction.

• Real-time recording and playback via Wi-Fi could be delayed depending on the specifications of your smart device.

• Motion detection is initiated by image sensor software.
  Errors may occur depending on the surrounding environment and the voltage of the car.

• If the GPS signal is good, ADAS will activate when the speed of the car is above the set speed.
  The surrounding environment may cause errors.

• Unauthorized connection of the uninterrupted power cable may cause malfunctions.
  Connections must be different depending on the power type of the vehicle. (Please contact a professional engineer if you need help installing it)

WARRANTY

PRODUCT NAME|
---|---
SERIAL NUMBER|
DATE OF PURCHASE|
SUPPLIER| SHOP NAME
CONTACT NUMBER

• IROAD Global guarantees the quality of the item.
• Only signed members can use this Warranty. Transferring and lending the card to others is strictly not allowed.
• The warranty period of each part is as follows.
  Product(Front/Rear Camera) : 1Year / Memory Card : 6 Months Cable(for Fuse,Rear,Cigar Power), Wifi Dongle : Does Not Cover

[IMPORTANT] Please keep this WARRANTY page to make use of after-sale- service!

SPECIFICATIONS

device
Voice guidance supported
Built-in GPS| Synced with Google Maps, records the location and traveling speed of the vehicle
Storage medium| Micro SD 32GB – 512GB (Class10)
Recording mode| Driving(Normal, Hyperlapse), Event(‘ impact), Parking(Timelapse,Motion Detection)
Uninterrupted power| Uninterrupted Power (Low voltage cut-off, overheating prevention is embedded)
Power supply| DC 12V/24V
Operating temperature| -10 – 60°C
Humidity| 10 – 95%
Dedicated PC viewer| Win7, Win8, Win10 (64Bit), Mac (macOS 11.0 or higher)
Application| Android 6.0, iOS 13.0 or higher

PACKAGE

Basic Components

| Front Camera/ Cradle
---|---
| IROAD Genuine MicroSD
| Uninterrupted Fuse Cable
| Wi-Fi USB Dongle
| User Manual

• The Basic components may change without prior notice.

Optional Items

| Cigar Jack Power Cable
---|---
| OBD- II Power Cable(Non-Electric / Electric)
| USB MicroSD Reader

BUTTON SCENARIO GUIDE

POWER OFF/ON

MODE

| OPERATION|

OPERATION EXPLANATION

---|---|---
POWER OFF| Press and hold the button (A) for 3 seconds long.| “Shutting down the system.” will be signaled, and the device will be powered off.
POWER ON| Press and hold the button (A) for 3 seconds long.| “Starting recording.” will be signaled, and the device will be powered on.

Wi-Fi OFF/ON

MODE

| OPERATION|

OPERATION EXPLANATION

---|---|---
Wi-Fi OFF| Press the button (A) for 1 second long.
“Ding” sound will signal.| “Wi-Fi power is off.” will be signaled, and the Wi-Fi connection will be unavailable.
Wi-Fi ON| Press the button (A) for 1 second long.
“Ding” sound will signal.| “Wi-Fi power is on.” will be signaled, and a Wi-Fi connection will be available.

• When ‘OFF’, the consumption power is reduced by 0.3w, and the device operating time is increased by 10%.

• ‘Wi-Fi ON/OFF function allows Users to turn Wi-Fi power on/off.
  Do not confuse it with the ‘Wi-Fi registration button’.
  When connecting to a smartphone, you must press the ‘Wi-Fi registration Button’

• For smartphones that have already been registered previously, users do not have to re-register even if the Wi-Fi on/off function was used

• Default setting – Wi-Fi function is ON.

Wi-Fi STAND BY MODE OFF/ON

MODE

| OPERATION|

OPERATION EXPLANATION

---|---|---
Wi-Fi STAND BY MODE OFF| Press the button (B) shortly.
“Ding-Dong” sound will signal.| “Stand-by mode for registration is deactivated.” will be signaled, and a Wi-Fi connection cannot be initiated.
Wi-Fi STAND BY MODE ON| Press the button (B) shortly.
“Ding-Dong” sound will signal.| “Stand-by mode for registration.” will be signaled, and a Wi-Fi connection can be initiated.

AUDIO RECORDING OFF/ON

MODE

| OPERATION|

OPERATION EXPLANATION

---|---|---
AUDIO RECORDING OFF| Press the button (B) for 4 seconds long.
“Ding-Dong” sound will signal.| “Voice recording is OFF.” will be signaled, then videos will be recorded without audio.
AUDIO RECORDING ON| Press the button (B) for 4 seconds long.
“Ding-Dong” sound will signal.| “Voice recording is ON.” will be signaled, then videos will be recorded with audio.

MANUAL RECORDING

MODE

| OPERATION|

OPERATION EXPLANATION

---|---|---
MANUAL RECORDING| Press the button (C) shortly.| “Manual recording.” will be signaled, and manual recording will start.

FORMATTING THE MICRO SD CARD

MODE

| OPERATION|

OPERATION EXPLANATION

---|---|---
FORMATTING THE MICRO SD CARD| Press the button (C) for 7 seconds long.| “SD Card is formatting. Please wait.” will be signaled, then the SD card will be formatted.

USING THE MOBILE APP

ANDROID DEVICE

1. On your Android device, open “Google Play Store” and download and install “IROAD X VIEW”

2. After running the application, register your device.
   – Activate the registration standby mode by pressing the Wi-Fi registration button “Stand-by mode for registration” (Voice guidance)

3. Tap Connect Now
   – From the IROAD X VIEW, select your dashcam.
   – The SSID and model will be shown.
   – Once the user selects the device, it will be registered & connected.

iOS DEVICE

1. On your iOS device, open “App Store” and download and install “IROAD X VIEW”

2. After running the application, register your device.
   – Activate the registration standby mode by pressing the Wi-Fi registration button “Stand-by mode for registration” (Voice guidance)

3. Tap Connect Now
   – follow the on-screen instructions to connect the product to your smartphone.

4. Select the Wi-Fi Network
   – From the Wi-Fi setting menu on your smartphone, select the Wi-Fi network starting with “I ROAD”

5. Enter Password
   – Enter “qwertyuiop” in the password field Now the product is connected to your iOS device via Wi-Fi

• The password is the first row of the alphabet on the keyboard

USING THE MOBILE APP

A. Main Screen
– Displays information about the connected product.
– Access to the live view screen.
– Access to the recorded videos.
– Configuring the dashcam settings.
B. Playback recording for Front / Rear Camera
– Playback the recorded videos.
– Choose video clip from the list and save it.(Video or Image)
C. Configuration System
– Configuring the dashcam settings. (Once settings change the device will be rebooted)
• Setting Language : Dashcam setting> System > System language > Change language.
• English is the default language.

USING THE PC VIEWER
The following provides brief information about the PC VIEWER screen layout.

1. Front/Rear video playback screen

2. Video controller

3. Speed indicator
   (only when GPS is connected)

4. G-sensor information

5. Recording file list

6. Map / Full-screen
   Switch screens (Front/ Rear)

7. Dashcam settings
   Minimize/ Maximize /close the PC viewer

MAMO

THE LEADING DASHCAM BRAND |

1CH Full HD DASHCAV
Model: IROAD FX1
Product: IROAD DASHCAM
Verification Number: R-R-JWW-IROADFX
JAEWONCNC Co., Ltd
Made in Korea
JAEWONCNC CO., LTD.
HEADQUARTERS
www.iroadkr.com
CORVIT INTERNATIONAL ( SINGAPORE )
www.iroad.sg
POSIS ( HONG KONG)
www.iroad.hk
IROAD MALAYSIA( MALAYSIA)
 www.iroad.my

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>