ReXING B1 Digital Binoculars User Manual

: June 5, 2024
: Rexing

Table of Contents

Overview
Product Overview
Specification
Installation
Basic Operations
Settings in Photo and Video Mode
Playback
Download files to PC
Customer Service
Warranty And Disclaimers
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Digital Binoculars
USER MANUAL

B1

Overview

Thank you for choosing REXING! We hope you love your new product as much as we do.
If you need assistance or have any suggestions to improve it, please contact us. You can reach us via
care@rexingusa.com or call us at 203-800-4466. Our support team will respond you as soon as possible.

Always a surprise in Rexing. Check us out here.

https://www.facebook.com/rexingusa/
https://www.instagram.com/rexingdashcam/
https://www.rexingusa.com/support/registration/
https://www.rexingusa.com/support/product-support/

Product Overview

01 Lens with Manual Focus
02 USB Port/Micro SD Card Slot Cover
03 IR Up/Zoom in/Up Button
04 IR Down/Zoom Out/Down Button
05 Power Button
06 Strap Hole| 07 IR LEDs
08 Menu Button
09 Mode Button
10 Shot Button
11 Battery Cover
---|---

Specification

IMAGE RESOLUTION	1M(1280×960)/VGA(640×480)
VIDEO RESOLUTION	960P(1280×960@30FPS)/VGA(640×480@30FPS)
APERTURE	F 1.2 f=25mm
LENS ANGLE	FOV=10° , diameter is 24mm
DISPLAY SCREEN	Inner screen 2.31 ”(960*240) TFT;

Operating the Camera

Installation

Power Supply
Batteries Installation
Please install batteries into the device before using.

Open the battery cover on the back of device.
Insert 6xAA batteries into the battery compartment. Make sure the polarity is correct.
Close the battery cover.

Note:

NEVER INSTALL DIFFERENT TYPES OF BATTERIES or NEW AND OLD BATTERIES in the product at the same time.
Anytime you load or unload batteries, make sure that the camera is OFF. If using external power source, do not remove internal batteries.

Inserting Memory Card

Please prepare a Micro SD card(up to 32GB) in advance.
Open the card slot cover, you will see the card slot.
Insert the Micro SD card into the slot. Make sure the direction is right. Never insert the card forcibly. Format the Micro SD card,this can improve the battery life and shutter speed.
To remove the card from the memory card slot of the device, press the edge of the memory card in gently, the card will pop out. Then remove the card.

Note:

Be sure the camera’s power is switched OFF before inserting or removing SD cards or batteries.
Camera will not operate without an SD memory card installed.

Basic Operations

Turn On And Turn Off
Keep pressing the power button for 3 seconds to turn on the device. Keep pressing the power button for 3 seconds again can
turn off the device.

Changing The Modes
The night version has 3 different modes: photo mode, video mode and playback mode. Press the Mode button can change mode.

| Photo Mode
For taking still photos
---|---
| Video Mode
For recording video
| Playback Mode
For playing the recording files

Taking Still Photos

Turn on the device,the default is photo mode. If not, press the Mode button to switch to photo mode.
Zooming: Keep pressing the or button to zoom in or zoom out the image, the value of magnification level appears on the LCD screen.
Take a still photo. View your subject via the LCD screen. Press the Shot button to take a photo.

Recording Video

Turn on the device, press the Mode button to switch to video mode.
Zooming: Keep pressing the or button to zoom in or zoom out the image. The value of magnification level appears on the LCD screen.
Start to record video. View your subject via the LCD screen. Press the Shot button to start to record. The record duration will be shown on the LCD screen.
Finish recording. Press the Shot button again to stop recording. The device will stop recording automatically once capacity of the memory card is full.

Note

About the manual focus: On the left lens, marked “far” and “near”. If the observation distance is far, please rotate the lens to left. If the distance is near, rotate the lens to right. Users can repeatedly adjust the optimal focal length according to the actual observation distance.
There is no sound in the video files. Because the observation distance is far, the sound cannot be transmitted.
In photo/video mode, if you have to view the darkness environment, please short press IR UP button to activate the IR LEDs, the image will change to black and white. The IR LEDs have seven levels, short press IR UP button to up the level, short press IR DOWN utton to down the level. (If the battery voltage is not enough, the IR LEDs level will down automatically. IR level can up to 7 level when the battery power is full.lf only left half power, the level just can up to 5. If only left 25% power, the level just can up to 3. If the battery power is lower than 25%, IR LEDs can not be activated.)

Settings in Photo and Video Mode

Press Menu button in photo or video mode, can change the settings.

MENU	Function
PHOTO RESOLUTION	Set the photo resolution.

Options: [1M 1280×960]/[VGA 640×480]
VIDEO SIZE| Set the video resolution.
Options:[960 1280×960]/[640 640×480]
NIGHT VISION SENSITIVITY| Choose the night vision sensitivity.
Options:[Low]/[Middle]/[High].
POWER FREQUENCY| Set the light source frequency to match frequency of electricity supply in local region to prevent interference. Options:[50Hz]/[60Hz].
POWER SAVE| Set the time to shut down the device for power saving if the device is idle. Options:[3min]/[5min]/[10min]/[OFF].
DATE&TIME| Set the date and time of device.
---|---
DATE STAMP| Add the date stamp on the photo or video files.
Options: [Off]/[Date]/[Date&Time].
LANGUAGE| Set OSD (on-screen) language.
Options:[English]/[Simplified Chinese/[Traditional Chinese]/[French]/[Dutch]/
[Spanish]/[ltalian]/[Portuguese]/[German]/ [Russian]/[Japanese]/[Korean].
FORMAT| Format your TF card. Format TF card will delete all files including the protected files. Please copy the important files before confirm. Options:[Yes]/[No].
RESET| Restore the setup to factory default settings.
Options:[Yes]/[No].
FW VERSION INFORMATION| User can see the firmware version.

Playback

Playback

Turn on the device, press the Mode button to switch to playback mode.
Press Up/Down button to view photos and video files.
Playback the video Press the Shot button to start playing the video files. Press the Shot button again to have a pause.

Press Menu button to stop the current video playing. Press Menu button in playback mode,the screen will display the playback menu. Press Up/Down button to scan lock or delete. And press Shot button to select one to enter the submenu.

Playback Menu List
Set the time period that the camera should wait before reacting to subsequent activation of the main sensor after the initial recording. During the selected interval, the camera will not record any images or videos. This prevents the memory card from being filled up with too many recordings of the same event. You can select between 5-60 seconds or 1-60 minutes.

MENU	Function
LOCK	Lock or unlock the current one file or all files in memory card.

Options:[Lock/ Unlock onel]/[Lock
All]/[Unlock All]
DELETE| Delete the current one file or delete all files in memory
card. Options:[One]/[AII]

Download files to PC

There are two ways to download files from the device to a computer:

By inserting the memory card into a card reader.
By connecting the device to a computer using the supplied USB cable.

Using a Card Reader

Eject the memory card from the device and insert it into a card reader. Then connect the card reader to a computer.
Open [My Computer] or [Windows Explorer] and double click the removable disk icon that represents the memory card.
Copy images from the card into a directory of your choice on the computer’s hard disk.

Connecting the Device to a PC through the USB Cable

Turn on the night vision. Connect it to a computer through the supplied USB cable.
When connecting to the computer, it will appears “MSDC” on the screen.
Open [My Computer] or [Windows Explorer].
A” Removable Disk” appears in the drive list.

Double-click the “Removable Disk” icon to view its contents. Files stored on the camera are located in the folder named “DCIM”. Copy the photos or files to your computer

Customer Protection

Customer Service

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radioed television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warranty And Disclaimers

Warranty
Up to 18 MONTHS LIMITED WARRANTY

Your product is warranted to be free of defects in materials and workmanship for 1 year after the date of purchase. This warranty does not cover damages caused by misuse, improper handling , and installation. Register your B1 at RexingUSA.com to extend the warranty. In the event warranty service is needed, please contact Rexing at care@rexingusa.com

Disclaimers
We hare no representations or warranties, either expressed or implied, by or concerning any content of these written materials or software, or for damages resulting from the use of the information contained therein. We reserve the right to alter the features and contents of this publication,hardware or software without obligation or advance notice. Warranty does not extend to any accessories used with the camera. We are not responsible if you use the trail camera for illegal purposes. We shall not be obligated to perform preventative maintenance, installation, reinstallation, or maintenance. The illustrations in this manual are for instructional purposes only and may not represent actual product exactly.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

www.rexingusa.com
New York office address: 131 West 33rd St 11C, New York, NY 10001
Connecticut office address: 264 Quarry Rd unit d, Milford, CT 06460