OSRAM 700 Pro 12V Lithium Starter Battery Instruction Manual
- June 5, 2024
- OSRAM
Table of Contents
OSRAM 700 Pro 12V Lithium Starter Battery
Warnings
- During charging of the jumpstarter it should be placed in a well-ventilated area.
- The battery terminal not connected to the chassis has to be connected first. The other connection is to be made to the chassis, remote from the battery and fuel line.
- After Jumpstarting remove the chassis connection and then the battery connection.
- The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Children being supervised not to play with the appliance.
- The appliance is only to be used with the unit provided and it must only be supplied at SELV (Safety extra-low voltage).
- The connection to the supply mains is to be in accordance with the national wiring rules.
- This appliance contains batteries that are non-replaceable.
- For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
OVERVIEW
INSTRUCTIONS
INSTALLATION
OSRAM GmbH Nonnendammallee 44 13629 Berlin Germany www.osram.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>