OSRAM QBM DALI EL-T CONV Qualified Bluetooth Mesh DALI Converter User Guide
- October 30, 2023
- OSRAM
Table of Contents
OSRAM QBM DALI EL-T CONV Qualified Bluetooth Mesh DALI Converter
Product Information
- Product Name : QBM DALI EL-T CONV
- Product Type : Qualified Bluetooth mesh to DALI Converter for emergency luminaire
- Input Voltage : 220-240 V; 50/60 Hz
- Power Consumption : 0.5 – 1.9 W
- DALI Control Interface: 4dBm
Note : The product image is for reference only. Please refer to the valid print on the product for accurate information.
Product Usage Instructions
- Refer to the wiring scheme for correct installation of the QBM DALI EL-T CONV.
- Mount the device as per the mounting hint provided.
- Refer to the safety and mounting information in your language for safe installation and usage of the product.
- The QBM DALI EL-T CONV is a qualified Bluetooth mesh to DALI converter designed for emergency luminaires.
- The device has an input voltage of 220-240 V; 50/60 Hz and consumes 0.5 – 1.9 W of power.
- The DALI control interface of the device is 4dBm.
- For any queries or assistance, contact OSRAM Sales at +30 2130994036 or email greece@osram.com.
Note : The importer of the QBM DALI EL-T CONV is OSRAM Sales EOOD, Blvd. Shipchenski Prohod 9, floor 4, office OSRAM, 1111 Sofia, Bulgaria, tel.: +359 32 348 248. For further information, contact OSRAM GmbH at — 6, 80807, Germany.
Dimensions
Wiring scheme
Mounting hint
download SylSmart Connected App
SAFETY AND MOUNTING INFORMATION
The QBM DALI EL-T CONV controller is exclusively designed for emergency luminare. An independent installation (e.g. ceiling integration) is possible by means of the ECO CI KIT (Art. Nr. 4008321392091); Recommended cable types for independent installation: DALI + mains voltage: 1x NYM 5×1.5mm² or 1x H05VV 5×1.5mm². The DALI-2 interfaces provide basic insulation against mains. If the DALI-2 interface is connected to an external voltage, particular with mains, the unit will be destroyed! The QBM DALI EL-T CONV supports Self contained Emergency lighting (202). The controller can serve up to 32 DALI-2 LED drivers (Part -207) in the broadcast mode and a DALI-2 presence sensor (Part -303) that comes with and without a daylight sensor (Part -304). 1) Qualified Bluetooth mesh to DALI Converter for emergency luminaire; 2) Indication LED for Bluetooth network status; 3) tc point; 4) Button to RESET to exfactory settings (press >10s to Reset); 5) Allowed wire leads diameter; 6) Made in Hungary; 7) picture only for reference, valid print on product; 8) Dimensions; 9) Wiring scheme; 10) Mounting hint for good radio connectivity; 11) Do not place any mains voltage or LED supply wires within or close to this area; 12) Placement of integrated radio transmitter antenna; 13) Recommended minimal distance to metal parts; 14) DALI interface; 15) Maximal total DALI wire length; 16) Guaranteed DALI supply current; 17) Maximum DALI Supply current; this device is not allowed to be connected with other DALI Bus power supplies; 18) Supported DALI-2 types; 19) Control gear (Part -207); 20) Occupancy sensor (Part -303); 21) Light Sensor (Part -304); 22) Self contained Emergency lighting (202) 23) Radio frequency; 24) Wireless protocol; 25) Qualified Bluetooth Mesh; 26) Wireless range; 27) 10 m line of sight; 28) Type of protection; 29) APP download for iOS smartphones; The device can be put into operation using the OSRAM HubSense Commissioning Tool (https://platform.hubsense.eu), subject to prior acceptance of the Terms of Use and the Privacy
References
- Sylvania | Home : LED Lighting Solutions - Sylvania Lighting
- OSRAM Americas | OSRAM SYLVANIA Homepage
- - Inventronics
- HubSense Commissioning
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>