OSRAM SubstiTUBE T8 Connected EM Mains Ultra Output 24W User Guide
- June 3, 2024
- OSRAM
Table of Contents
OSRAM SubstiTUBE T8 Connected EM Mains Ultra Output 24W
SubstiTUBE® T8 Connected
Please take the time to read this user instruction. The instruction contains important information and notes regarding the installation and operation.
Important: To operate connected system, LEDVANCE Connected SENSOR is required:
LEDVANCE Connected Sensor LB| maximum recommended mounting height: <4m 1)|
EAN: 4058075232969
---|---|---
LEDVANCE Connected Sensor HB| maximum recommended mounting height: 4m-14m 1)|
EAN: 4058075232983
Please visit our website www.ledvance.com/substitube-connected for detailed installation instructions. Substitube® T8 Connected is suitable to certain T8 G13 bi-pin base / EM (CCG) / Mains. 2)
Replacement of T8 FL 18)| Storage temperature 19) (Ts)|
Ambient temperature 20) (Ta)
---|---|---
0.6 m, 1.2 m, 1.5 m| -20° … 80°C| -20° … 50°C
Hereby, LEDVANCE GmbH declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: smart plus. ledvance.com /declaration-of-conformity. 21) Wireless radio used in Zig bee lamps/luminaires/components 2400 – 2483.5 MHz, max. RF output power 9.5dBm. 22)
Installations on Electromagnetic ballast 22)
Please ensure that for Electro Magnetic (EM) application existing fluorescent starter is replaced with SubstiTUBE® LED starter (included in each packaging).
This lamp is designed for general lighting service (excluding for example explosive atmospheres). This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In cases of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted. In case of doubt regarding suitability of the application please measure tc max temperature on the product. In case of multi lamp luminaire application measure tc max temperature of all in-stalled lamps. Please use a flexible thermosensor (e.g. “Type K”). SubstiTUBE® T8 Connected operated above tc max can lead to premature aging and failure of devices. SubstiTUBE® T8 Connected emits light only with a limited beam angle not like a fluorescent tube with 360° output. Not usable in tandem circuitry.
Installations on Mains (without ballast) 23)
Cut wires and remove ballast and follow below instructions
Mains
Installation guide
Warning! The fixture has been modified and can no longer operate the originally specified T8 Fluorescent lamp. Please use only OSRAM SubstiTUBE® LED.
LEDVANCE GmbH
Steinerne Furt 62
86167 Augsburg, Germany
www.ledvance.com
LEDVANCE Ltd, Aquila House
Delta Crescent, Westbrook, Warrington
WA5 7NR, United Kingdom
References
- Declaration-of-conformity | LEDVANCE
- Declaration of Conformity | LEDVANCE
- Corporate website | LEDVANCE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>