OSRAM EGA850N LED Lighting COBs Engines Modules User Guide
- June 1, 2024
- OSRAM
Table of Contents
OSRAM EGA850N LED Lighting COBs Engines Modules
EGA2000 Starboard
Specifications:
- Starboard diameter: 16 mm
- Starboard thickness: 1.6 mm
- Pad for pogo pin or soldered leads
- VCSEL Cathode and -ve pads on exposed base
- VCSEL Anode and +ve pads on top
General Description and Features:
The EGA2000 starboard is a PCB adaptor with a module soldered on it, designed to facilitate the connection of any EGA2000 module to an external power/control unit. It allows for easy access to the VCSEL anode and cathode with exposed connections for power connection through cables. The starboard has a small footprint and is ideal for lab tests.
Features:
- Module soldered on the starboard
- Easy access to VCSEL anode and cathode
- Exposed connections for power connection through cable
- Easy handling
Benefits:
- Facilitates use of the illuminator module
- Facilitates lab tests
- Small footprint
Product Usage Instructions
Safety Guidelines:
It is the user’s responsibility to ensure eye safety compliance at the system
level when using the EGA2000 starboard.
Connection:
- Identify the VCSEL cathode and anode on the starboard.
- Connect the starboard to the EGA2000 module using the provided guidelines.
- Connect the starboard to an external power/control unit following standard protocols.
Handling:
Handle the starboard with care to avoid damage to the soldered module or any
exposed connections.
Frequently Asked Questions:
Q: What are the available ordering codes for the EGA2000 Starboard?
A: The available ordering codes are Starboards EGA850N, EGA850W,EGA850UW,
EGA940N, EGA940W, and EGA940UW.
Q: Is the EGA2000 Starboard RoHS compliant?
A: Yes, the EGA2000 Starboard is RoHS compliant, ensuring it fully
complies with current RoHS directives.
Introduction
The EGA2000 starboard is a PCB adaptor with a module soldered on it, which
intends to help the user to connect any EGA2000 module to an external
power/control unit.
It is the user’s responsibility to take care of the eye safety compliance at
system level.
Ordering Information
Figure 1:
Illustration Picture of a Starboard (with connection cables not sold with the
starboard)
General Description and Features
The EGA2000 starboard has the following characteristics:
- Starboard diameter = 16 mm
- Starboard thickness= 1.6 mm
- Pad for pogo pin or soldered leads
- VCSEL Cathode and -ve pads on exposed base
- VCSEL Anode and +ve pads on top
Figure 2:
Starboards’ Dimensions
The table below summarizes the features and benefits of the starboard:
Figure 3:
Added Value of Using the EGA2000 Starboard
Revision Information
Changes from previous version to current revision v2-00
Updated document format
- Page and figure numbers for the previous version may differ from page and figure numbers in the current revision.
- Correction of typographical errors is not explicitly mentioned.
Legal Information
Copyrights & Disclaimer
Copyright ams AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe.
Trademarks Registered. All rights reserved. The material herein may not be
reproduced, adapted, merged, translated, stored, or used without the prior
written consent of the copyright owner.
Information in this document is believed to be accurate and reliable. However,
ams AG does not give any representations or warranties, expressed or implied,
as to the accuracy or completeness of such information and shall have no
liability for the consequences of use of such information.
Applications that are described herein are for illustrative purposes only. ams
AG makes no representation or warranty that such applications will be
appropriate for the specified use without further testing or modification. ams
AG takes no responsibility for the design, operation and testing of the
applications and end-products as well as assistance with the applications or
end-product designs when using ams AG products. ams AG is not liable for the
suitability and fit of ams AG products in applications and end-products
planned.
ams AG shall not be liable to recipient or any third party for any damages,
including but not limited to personal injury, property damage, loss of
profits, loss of use, interruption of business or indirect, special,
incidental or consequential damages, of any kind, in connection with or
arising out of the furnishing, performance or use of the technical data or
applications described herein. No obligation or liability to recipient or any
third party shall arise or flow out of ams AG rendering of technical or other
services.
ams AG reserves the right to change information in this document at any time
and without notice.
RoHS Compliant & ams Green Statement
RoHS Compliant: The term RoHS compliant means that ams AG products fully
comply with current RoHS directives. Our semiconductor products do not contain
any chemicals for all 6 substance categories plus additional 4 substance
categories (per amendment EU 2015/863), including the requirement that lead
not exceed 0.1% by weight in homogeneous materials. Where designed to be
soldered at high temperatures, RoHS compliant products are suitable for use in
specified lead-free processes.
ams Green (RoHS compliant and no Sb/Br/Cl): ams Green defines that in addition
to RoHS compliance, our products are free of Bromine (Br) and Antimony (Sb)
based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous
material) and do not contain Chlorine (Cl not exceed 0.1% by weight in
homogeneous material).
Important Information: The information provided in this statement represents ams AG knowledge and belief as of the date that it is provided. ams AG bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. ams AG has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ams AG and ams AG suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Headquarters
ams AG
Tobelbader Strasse 30
8141 Premstaetten
Austria, Europe
Tel: +43 (0) 3136 500 0
Please visit our website at www.ams.com
Buy our products or get free samples online at
www.ams.com/Products
Technical Support is available at www.ams.com/Technical-
Support
Provide feedback about this document at www.ams.com/Document-
Feedback
For sales offices, distributors and representatives go to
www.ams.com/Contact
For further information and requests, e-mail us at
ams_sales@ams.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>