SENTRY GXTW1 True Wireless Gaming Earbuds User Manual
- June 5, 2024
- Sentry
Table of Contents
SENTRY GXTW1 True Wireless Gaming Earbuds
Using your True Wireless Earphones
Charge the earbud and case first. Make sure the charging case and earbuds are fully charged.
- STEP 1 Turn off the Bluetooth function from you music device. Eg. Mobile phone or music device.
- STEP 2 Take out the earbuds from the charging case after they have charged. The earphones will be auto-on,you will hear “Power On” and the earbuds’s LED light will flash fast before pairing. When the dual earbuds are auto-pairing, you will hear a tune to suggest the dual earbuds are paired successfully,at this status,the Right earbud will have fast flashing led light,but Left earbud’s light is off.
- STEP 3 You can now turn on the Bluetooth function of your mobile phone. Search and select GXTW1,click it to connect.When the earbuds are connected with the device successfully,you will hear “ Connected” and earbuds LED light will be on and still, At this status, Long press either left side or right side earbud top pattern for about 3 seconds,you could hear a tune to switch the led light. If you turn off the bluetooth function on your mobile phone,you will hear “Disconnected” ,Right earbud will have fast flashing led light,but the Left earbud’s light is off. The pairing mode between earbuds and device will keep about 5 minutes,the earbuds will be auto-off if no device connection in 5 minutes,you will hear “power off”. After the initial settings, earphones will auto-pairing with your device directly when reuse.
Button Function
On/Off
Pairing dual earphones: Long press left and right earphone top pattern for 3
seconds, turn on earphones; Long press left or right earphone top pattern for
about 6 seconds,turn off earphones
Answer / Hang Up
When coming call,the led light keep on and still,short press the top pattern
on the left or right earphone to answer the phone. During the call, the
earphones with fast flashing light. short press the top pattern on the left or
right earphone to end the call. When playing music,there comes a call,the
music will be auto-paused and auto go back to play when end the call.
Reject / Call Back
When coming call, long press left or right earphone about 2 seconds to refuse
the call. Three-click the right earphone to resume back to the last call,
three-click the left earphone to open the voice assistant.
Play / Pause Music
If your listening music is at the pause status,just touch either left earphone
or right earphone top pattern,you could continue the music,the earphones will
have fast flashing led light. While listening to the music, touch either left
earphones or right earphone top pattern,you could pause the music,the earphone
LED light will keep on and still. If one of the earbuds have run out of
battery, the other one will continue to work until it runs out of power also.
Last / Next Song Control
When playing music, double-click the left earphone top pattern to switch to
the Last song; double-click the right earphone top pattern to switch to the
next song
Charging function
Charge the charging case
There is a Type-C charging cable in the package, you can connect the power
adapter for charging. The LED light will keep flashing when it is
charging.When fully charged,the LED lights keep on and still. Charging amount
times may vary depending on battery status.
Charge the earphones:
Please double-check and confirm the charging compartment has sufficient power,
then put the earphones into the correct position for charging. If the earbuds
are not placed securely into the case, it may not charge. Please take out the
earbuds and re-insert them in the case. Also make sure the lid is properly
closed so that charging the earbuds can start. Some large earpads could also
obstruct the closure of the case, and so may need to be removed. When
earphones are low battery,you will hear a tune to announce low battery,the
earphones with fast flahing led light,when the earphones run out of
battery,you will hear “power off”,earphones will be auto off. Earphone and
charging case led light will on and still to confirm that charging has
started.When the earphones are fully charged,the led light on earphones and
charging case will be off. Note : When there is no charge left on the charging
case,it will appear fast flashing led light to announce low battery,at this
time,the the earbuds need to be manually turned off by pressing the top
pattern on both the earbud for 6 seconds before putting back to the charging
case. Charge the case so that the earbuds can be recharged.
Frequently asked questions
Why do Bluetooth earbuds can not turn on?
- You can check if earbuds is with power or not ? if not, please fully charge it before turning it on.
- Please long press the top pattern on the earphones.(the detailed operation , please refer to the manual.)
Why Bluetooth earbuds signal is unstable ?
- Restart the bluetooth earbuds .
- Please kindly check the compatibility and calling communication quality of the mobile phone.
- Please confirm if the distance between earbuds and phone is too far or there are interference surrounded. If too far or there are interference ,the signal will be unstable.
- Please don’t stay in the signal reflective environment.
Why the Bluetooth earbuds can’t hear voice?
- Please kindly check if the bluetooth earbuds is on mute status.
- Please kindly check if bluetooth earbuds and phone are connected well.
- Then confirm if the distance between earbuds and phone is too far or there are interference surrounded.
If sometimes,the earbuds can’t work normally , please delete the earbuds from your phone by going to the phone’s bluetooth settings. Then reset the earbuds by long pressing both earbuds top pattern for about 8 seconds. Then follow Steps 1-3 on the first page of this manual to repair your earbuds to your phone device. If after some time,the earbuds stop charging,pls try to use the cotton swab to clean the earbud bottom and the inductive pins to avoid any dusts and sweat.
Specifications
- Model: GXTW1
- Bluetooth Version: 5.3
- Power Input: DC 5V
- Earphone Working Time: About 4 hours at 50% volume
- Earphone battery capacity: 40mAh+40mAh=80mAh
- Charging Case battery capacity: 300mAh
- Support Protocol:a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\ rfcomm\sdp\l2cap profile
- CLASS 1 LED PRODUCT
Limited 90-Day Warranty
Sentry warrants this product to be free from defects in materials and
workmanship for 90 days from the date of original purchase. This warranty does
not pertain to damage resulting from accident, abnormal use, misuse or
neglect. Any defective product will be replaced if returned to an authorized
Sentry dealer or to Sentry directly at: PO Box 885, One Bridge Street,
Hillburn, NY 10931. Please enclose a $5 check for return shipping. The
Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sentry Industries Inc is under license.
Other trademarks and trade names are those of their respective owners. Sentry
Industries inc declares that radio equipment GXTW1 is in compliance with
Directive 2014/53/EU. The EU declaration of confirmity is available at
https://sentryindustries.com/european-declaration-of-conformity/
Conformity with Directives
This product is CE marked to denote conformity with Directives 73/23/EEC (low
voltage) and 89/336/EEC (Electromagnetic Compatibility) , as amended.
Environmental Protection Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
FCC
“NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s a
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>