NAKED SUN ONYX Spray Tanning Machine Instruction Manual

Warranty Information

IMPORTANT: Please keep your Proof of Purchase and User Manual in a safe place as these items will be required for warranty claims. Prior to making a warranty claim please read the Trouble Shooting section.
If within 1 year of the date of purchase the product fails due to a defect, we will repair or replace free of charge. The warranty only applies to the original purchaser and is not transferable. The product must be returned to the seller with Proof of Purchase to be assessed at the purchaser’s expense.
Warranty does not apply to normal wear and tear damage, removal of straw, improper use, improper care, use of improper voltage or current, use contrary to operating instructions, improper disassembly, repair, or alteration by any person other than our service personnel.
USING THIS SYSTEM TO SPRAY ANYTHING BESIDES SPRAY TANNING SOLUTION VOIDS THE WARRANTY!

For all warranty claims please contact The Tanning Store
sales@thetanningstore.com
(866)446-1919

Safety Information

DO NOT

• Use spray guns to spray flammable substances.
• Clean with flammable solvents.
• Operate unit if fatigued or under the influence of drugs or alcohol.
• Allow children to play with the unit.
• Use a 3 to 2 adapter or extension cord.
• Immerse the unit in water or any other liquids.
• Expose unit to rain or inclement weather conditions.

NEVER

• Drop or insert any object into any opening on the machine or hose.
• Block airways of the unit
• Hold the power cord at plug connections to support the power cord.
• Operate unit if cord or plug is damaged.
  Failure to observe proper electrical connections may result in electrical shock.

WARNING

• NEVER PLACE THE SPRAY TANNING UNIT NEAR BATHTUBS, SINKS, OR ANY AREAS THAT MAY CONTAIN WATER

• DO NOT SPRAY ANY TANNING SOLUTION INTO THE EYES.
  IF SOLVENT IS SPRAYED INTO THE EYES WASH WITH WATER IMMEDIATELY AND CONSULT A DOCTOR

• DO NOT SPRAY ANY TANNING SOLUTION INTO OPEN WOUNDS
  IF SOLVENT IS SPRAYED INTO WOUNDS WASH WITH WATER IMMEDIATELY AND CONSULT A DOCTOR

• DO NOT BREATHE IN TANNING SOLUTION
  WEARING NASAL PLUGS AND OPERATING A EXTRACTION FAN DESIGNED TO PROPERLY VENTILATE THE SPRAYING AREA IS
  STRONGLY RECOMMENDED

Setting Up Your Machine

Adjusting fluid control

|

Adjusting spray pattern

---|---
When making adjustments hold the spray gun with the nozzle facing you.
Turn the fluid knob clockwise until fully tightened.
Turn the fluid knob counter-clockwise up to 2 full turns.

Test with water first before spraying clients to fine-tune this adjustment for the atomization desired. Depending on the thickness of your solution, results will vary. Adjust accordingly.

| To adjust the spray pattern you will need to turn the horns on the nozzle.
If you are unable to turn horns you may need to loosen the cap slightly. Hold horns in place while tightening cap back to avoid horn movement.

Cleaning & Maintenance

• Unscrew the solution cup and empty the excess solution.
• Add clean room temperature water or HVLP gun cleaner to the solution cup and spray through.
• Unscrew the solution cup and pull the trigger lightly. Tap against the cup rim to release any fluid in the pickup straw.
• With the solution cup detached, turn the machine on and pull the trigger allowing air to blow any excess water out of the pickup straw and nozzle.
• Thoroughly dry the solution cup before attaching back to the machine.
• After every 10-15 uses remove the back filter cover and thoroughly rinse the filter until water runs clear. Be sure the filter has completely air-dried before re-inserting it into the machine.
• Lightly wet cloth with warm water and wipe the machine clean.
  DO NOT REMOVE THE STRAW. REMOVAL OF STRAW VOIDS WARRANTY

Tan Gone Wrong

the spray gun to the body for optimal results.
You are spraying too slow| Speed up. You want to move at a nice steady pace. Not so fast that you aren’t getting good coverage and not so slow that you have a solution dripping down your client.
*Expert Tip: Practice using water to find your perfect pace.
The solution dial is open too far| With the spray gun facing you, make quarter turns clockwise to open the dial as needed allowing less solution to come out.
Brown speckles or “dots” on the skin after rinse| The solution has been collected in the hair follicle.| Avoid heat. Even though your client may not like the cold, by heating the room you run the risk of their pores opening.
The client should avoid waxing or shaving 24hrs prior to the appointment
The tan is streaky| Too much solution was sprayed| Make sure your solution dial is adjusted properly, that you are the correct distance from the body and moving at a steady pace all the way through.
Tan is uneven| The customer did not prep properly.| If the client did not properly exfoliate, what they are seeing is the skin naturally exfoliating which can be inconsistent.
Customer is using products that are stripping the tan.| Make sure your clients are not using soaps or lotions that will compromise their tan. They can use a gradual tanning lotion to help fill in where the streaks are.
The client did not exfoliate properly prior to tan| The client may not have exfoliated their skin at all or missed areas while exfoliating.
There is some type of a barrier on the skin| Be sure that the customer has properly prepped and their skin is free of moisturizers, deodorant, oils, perfumes, etc. Also be sure to only apply barrier cream to the palm of hands, elbows, the bottom of feet, and knees.

Tan Gone Wrong

this will help it to blend the solution. Do not panic, the tan will not turn out speckled. You are simply seeing the cosmetic bronzers.

Re-adjust your solution dial to find the optimal setting. Start with a turn and a half then make adjustments from there.

The clients palms are orange| Accidently got sprayed| Before you begin spraying apply barrier cream to your palms.
While spraying forearms, ask clients to flip their wrists down to avoid spraying their palms.
Client is orange| Sprayed too much solution on client| On average you will only use 1.5 to 2 oz of solution for a full average body tan. Using more than this can cause oversaturation causing the client to turn orange.
DHA % is too high| Use a lower DHA % next time or have the client shower sooner.
Solution is green| If it is green right out of the bottle it has oxidized and may not develop.| If you purchased within 30 days and are just opening the solution for the first time then, you should contact the supplier. Most solutions have a 30-shelf life once opened.
You are seeing the oxidation process. Make sure that between uses you are tightly sealing the bottle to prevent air from getting in, you are storing the solution in a cool dry area and that you are not compromising the solution by pouring excess back into the bottle after a spray session.
Expert Tip: Apply a small amount of solution to a discrete area on your body to test if the solution still develops.
If it is normal colored in the spray gun but turns green when hitting the client’s skin.| If the solution turns green after being sprayed on the client, they have something on their skin that is causing this reaction with the DHA. Their tan will still develop normally. This is usually seen under the arm and the solution is reacting to the deodorant the client has on.

Machine Troubleshooting

that the power cord is pushed firmly into the outlet.
The electrical outlet needs to be reset or is bad| Try pressing the reset button on the outlet. If that does not work then try another outlet.
The gun or cup is leaking.| The solution cup is not tight.| Make sure the solution cup is finger tight
The Cup gasket is missing or damaged.| Call manufacturer (866)446-1919
The solution cup is overfilled| Pour out excess solution. The cup should not be filled over 3/4 of the cup.
The machine is not being helped upright| You must keep the spray gun level at ALL times. DO NOT TILT the spray gun.
Inconsistent spraying| The nozzle may be blocked. To check, try spraying room temperature water through the applicator.
IF no water comes through, check under your nozzle for blockage.
There is not enough solution in the cup. The feed tube is loose or has been removed.

• Apply barrier cream to your client’s hands, elbows, knees, and feet. Make sure the client is wearing sticky feet and the hair cap is correctly positioned.
• Let your client know what to expect and the flow you will go in.
• Keep a steady pace for a consistent and even tan
• Ask clients to turn 90 degrees to their right until you have covered their entire body. Make sure they have a slight bend in their joints to prevent wrinkling.
• Always spray top to bottom
• Always start just off the body when spraying to avoid high concentration spots

| Step By Step

Step 1 – Begin spraying your client with their back towards you. Start just off their shoulders and go to waist level. Next, spray the backside of their arms stopping at their wrists. Ask the client to bend slightly forward then spray from waist to feet.
Step 2 – Have the client turn 90 degrees and raise their arm creating a straight line with their body. (If nude-This will ensure you can easily reach under female clients’ breasts. For women with larger breasts, if this is not enough, ask them to gently hold them up with their fingers and be very careful not to spray their fingers.) Begin spraying slightly above the armpit just off the body making a sweeping motion as you make your way to their waist. Then make your way from their waist to feet.
Step 3 – Have your client turn 90 degrees again, they should be facing you at this point. Begin spraying just off their shoulders spraying to their waistline. (If nude- women with larger breasts will need to raise their arms and if this is not enough, ask them to gently hold them up with their fingers and be very careful not to spray their fingers.) Next, you will spray the front of their arms to their wrists. To spray their hands ask them to make a wide claw with their hands, then make an X pattern starting just off their wrists to the opposite side of their hand. Then spray from their waist to feet. Make an X when spraying the top of their feet. Start just off their foot by their ankle to the opposite side of their foot. Ask them to make a 45-degree angle to spray the inside of their legs
Step 4 – Ask the client to turn 90 degrees and repeat step 2
Step 5 – Have the client turn back to face you. You will now spray their face and neck. Have the client slightly tilt the head back to spray the neck.
Step 6 – Blow any wet areas dry

---|---
Standing Positions| | | | | | | |

For additional troubleshooting or warranty claims
please call: 866-446-1919
or
email: sales@thetanningstore.com
For additional resources or FAQ please go to
thetanningstore.com
@theofficialtanningstore The Tanning Store The Tanning Store

References

• The Tanning Store - Tanning Supplies, Spray Tan Equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>