BRIZO R60000-PXWS Universal Connection Pressure Balancing Universal Rough Valve Body Instruction Manual
- June 13, 2024
- BRIZO
Table of Contents
BRIZO R60000-PXWS Universal Connection Pressure Balancing Universal Rough
Valve Body
Product Information
- Product Name: R60000-UNBX
- Alternate Product Names: R60000-UNBXHF, R60000-PX, R60000-UNWS, R60000-UNWSHF, R60000-PXWS
- Manufacturer: Brizo Kitchen & Bath Company
- Contact Information: 1-877-345-BRIZO (2749), www.brizo.com/customer-support
- Revision Number: 77929 Rev. E
- Product Warranty: This warranty is provided by Brizo Kitchen & Bath Company and is not transferable. For more information on warranty coverage, please visit our website or contact us directly.
Product Usage Instructions
Installation
- If installing on a thin wall, ensure that the plasterguard is placed behind the wall. If the wall is not thin, it should be flush with the front of the plasterguard. Refer to the instructions on the bag for thin wall mounting. Note: For thin wall installation, RP47202 might be needed.
- The figure illustrates the diverter and MultiChoice installed in the same finished wall. Refer to the diverter rough installation instructions for more information.
- Connect the valve body to water supplies using the proper fittings for your valve body type (copper tubing, iron pipe or Pex). Note: (1) is the cold inlet port and (2) is the hot inlet port. If either of the two outlet ports is to be unused, seal the port with a pipe plug.
- If making a back-to-back or reverse installation (hot on right and cold on left), install the valve body as described above, but the water supply lines will be reversed. Note: (1) is the hot inlet port and (2) is the cold inlet port.
- Remove the bonnet (1) and test cap (2) before soldering. Leave the screen (3) installed. Warning: Avoid soldering at high temperature as it may damage the screen. Be sure to remove stops (4) from the w/stops version before soldering. (Do not install before soldering.)
Pressure Testing & Flushing the Installation
Perform pressure testing and flushing of the installation in accordance with
local plumbing codes and regulations.
Warranty Information
- This product is covered by Brizo Kitchen & Bath Company’s warranty. The duration of the warranty may vary by state/province. Please refer to the warranty terms and conditions for more details. This warranty is exclusive to Brizo Kitchen & Bath Company and is not transferable.
- For warranty inquiries or concerns, please contact Brizo Kitchen & Bath Company directly or visit their website for more information.
You may need
For easy installation of your Brizo® faucet you will need:
- To READ ALL the instructions completely before beginning.
- To READ ALL warnings, care, and maintenance information.
NOTICE TO INSTALLER :
CAUTION!–As the installer of this rough-in body, it is your responsibility to
properly INSTALL this roughin body per the instructions given. YOU MUST inform
the owner/user of this requirement by following the instructions. If you or
the owner/user are unsure how to properly install this rough-in body, please
refer to the instructions supplied and if still uncertain, call us at
1-877-345-BRIZO. Leave this Instruction Sheet for the owner’s/user’s
reference.
INSTALLATION INSTRUCTION
-
STEP 1
-
A. SHUT OFF WATER SUPPLIES.
-
Consider the type and thickness of your finished wall before placing your stringer back plate. Install the body (1) so the surface of the finished wall is flush with the front of the plasterguard (2) ± 1/4″. Note: For with stops models, plasterguard must be flush or subflush 1/4″ to finished wall.
-
Mount body using the two stringer mounting holes (3) on the bracket.
Note: Remove cover (4) to access mounting holes. Make sure the word “UP” (5) is on top of the valve body when installing. -
B. Distance (1) from the stringer (2) to the front of the plasterguard is 2 3/4″ ± 1/4″ (70 mm ± 6 mm).
Note: This is the same distance to the finished wall (3). Distance (4) from the stringer (2) to the front of the bonnet is 3 7/8″ (99 mm). (For reference only)
If a thin wall is used, be sure to have the plasterguard behind the wall, otherwise the wall should always be flush with the front of the plasterguard. See instruction on the bag for thin wall mounting.
Note: For thin wall installation, RP47202 might be needed. -
C. The figure illustrates the diverter and MultiChoice installed in the same finished wall.
Note: Refer to the diverter rough installation instructions for more information.
-
-
STEP 2
-
A. Connect valve body to water supplies using the proper fittings for your valve body type (copper tubing, iron pipe or Pex). Note: (1) is the cold inlet port and (2) is the hot inlet port. If either of the two outlet ports is to be unused, seal the port with a pipe plug.
If you are making a back to back or reverse installation (hot on right and cold on left) install the valve body as described above, but the water supply lines will be reversed. Note: (1) is the hot inlet port and (2) is the cold inlet port. -
B. Remove bonnet (1) and test cap (2) before soldering. Leave screen (3) installed. Warning: Avoid soldering at high temperature. Exposure to high temperatures may damage screen. Be sure stops (4) are removed from the w/stops version before soldering. (Do not install before soldering.
-
-
STEP 3
Connect top outlet (1) to shower pipe with proper fittings. Connect bottom outlet (2) to tub spout pipe with proper fittings. Pipe (3) between valve body and tub spout must be a minimum of 1/2″ (13 mm) copper pipe or 1/2″ (13 mm) iron pipe in a straight drop no less than 8″ (203 mm) but no more than 18″ (457 mm) long with only one iron pipe or copper 90 degree elbow to the tub spout nipple. Do not use PEX tubing for tub spout drop.
NOTE: It is suggested that you anchor your shower arm and tub spout elbows or water lines. -
STEP 4 PRESSURE TESTING & FLUSHING THE INSTALLATION
Prior to testing, remove cover (1), bonnet (2) and cap (3). Ensure O-ring (4) and filter screen (5) are properly installed. Reinstall cap and bonnet and tighten securely. Plug both outlets with proper fittings. Check for leaks. After testing remove shower and/or tub spout plug and flush system. After flushing remove filter screen (5) and reinstall cap, bonnet and cover. Install stops (6 & 7) in the w/stops version and set to full open. Note: Install stops in the w/stops version as follows: Thread nut (6) on stem (7) as shown. Then press stem and nut assembly into body (8) and tighten using a 3/8″, 6 point, deep well socket. With a flat head screwdriver, adjust stem clockwise to close and counterclockwise to open.
Limited Warranty on Brizo® Faucets
Parts and Finish.
All parts (other than electronic parts, air switch power modules,
batteries, and parts not supplied by Brizo Kitchen and Bath Company) and
finishes of Brizo® faucets purchased from authorized Brizo sellers are
warranted to the original consumer purchaser to be free from defects in
material and workmanship for as long as the original consumer purchaser owns
the home in which the faucet was first installed. For commercial purchasers,
(a) the warranty period is ten (10) years for multi-family residential
applications and (b) five (5) years for all other commercial uses, in each
case from the date of purchase. For purposes of this warranty, the term
“multi-family residential application” refers to the purchase of the faucet
from an authorized Brizo seller by a purchaser who owns but does not live in
the residential dwelling in which the faucet is initially installed, such as
in a rented or leased single unit or multi-unit detached home (duplex or
townhome), or a condominium, apartment building or community living center.
The following installations are not considered multi-family residential
applications, are excluded from the 10-year warranty, and are subject to the
5-year warranty: industrial, institutional or other business premises, such as
a dormitory, hospitality premises (hotel, motel, or extended stay location),
airport, educational facility, long- or short-term healthcare facility
(hospital, rehabilitation center, nursing, assisted or staged-care living
unit), public space or common area.
Electronic Parts and Batteries (if applicable)
Electronic parts (other than air switch power modules and batteries), if any,
in Brizo® faucets purchased from authorized Brizo sellers are warranted to the
original consumer purchaser to be free from defects in material and
workmanship for five (5) years from the date of purchase or, for commercial
users, for one (1) year from the date of purchase. No warranty is provided on
batteries.
Air Switch Power Module
The electronic power module of Brizo® air switches purchased from
authorized Brizo sellers is warranted to the original consumer purchaser to be
free from defects in material and workmanship for two (2) years from the date
of purchase or, for commercial users, for one (1) year from the date of
purchase.
What We Will Do.
Brizo Kitchen & Bath Company will repair or replace, free of charge, during
the applicable warranty period (as described above), any part or finish that
proves defective in material and/or workmanship under normal installation,
use, and service. Brizo Kitchen & Bath Company may, in its sole discretion,
use new, refurbished or recertified parts or products for such repair or
replacement. If repair or replacement is not practical, Brizo Kitchen & Bath
Company may elect to refund the purchase price in exchange for the return of
the product. These are your exclusive remedies.
What Is Not Covered
- Because Brizo Kitchen and Bath Company is unable to control the quality of Brizo products sold by unauthorized sellers, unless otherwise prohibited by law, this warranty does not cover Brizo products purchased from unauthorized sellers (visit Brizo.com to see a list of our Authorized Online Resellers).
- Any labor charges incurred by the purchaser to repair, replace, install or remove this product are not covered by this warranty. Brizo Kitchen & Bath Company shall not be liable for any damage to the product resulting from reasonable wear and tear, outdoor use, misuse (including use of the product for an unintended application), freezing water, abuse, neglect, or improper or incorrectly performed assembly, installation, maintenance or repair, including failure to follow the applicable care and cleaning instructions. Customized components purchased by the consumer or commercial user and installed into a Brizo product, and any damage resulting from removal or improper installation of such components, are not covered by this warranty.
- Brizo Kitchen & Bath Company recommends using a professional plumber for all installation and repair of faucets. We also recommend that you use only genuine Brizo® replacement parts.
What You Must Do To Obtain Warranty Service or Replacement Parts.
A warranty claim may be made and replacement parts may be obtained by
calling 1-877-345-BRIZO (2749) or by contacting us by mail or online as
follows (please include your model number and date of purchase):
- In the United States and Mexico:
- Brizo Kitchen & Bath Company
- 55 E. 111th Street
- Indianapolis, IN 46280
- Attention: Warranty Service
- https://www.brizo.com/customer-support/contact-us
- In Canada:
- Masco Canada Limited, Plumbing Group
- Technical Service Centre
- 350 South Edgeware Road
- St. Thomas, Ontario, Canada N5P 4L1
- https://www.brizo.com/customer-support/contact-us
Proof of purchase (original sales receipt) from the original purchaser must be made available to Brizo Kitchen & Bath Company for all warranty claims unless the purchaser has registered the product with Brizo Kitchen & Bath Company. This warranty applies only to Brizo® faucets installed in the United States of America, Canada, and Mexico.
Limitation on Duration of Implied Warranties.
Please note that some states/provinces (including Quebec) do not allow
limitations on how long an implied warranty lasts, so the below limitations
may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF
FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE
DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER.
Limitation of Special, Incidental or Consequential Damages.
Please note that some states/provinces (including Quebec) do not allow the
exclusion or limitation of special, incidental, or consequential damages, so
the below limitations and exclusions may not apply to you. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND BRIZO
KITCHEN & BATH COMPANY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR
REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE. BRIZO KITCHEN & BATH COMPANY
SHALL NOT BE LIABLE FOR ANY DAMAGE TO THE FAUCET RESULTING FROM REASONABLE
WEAR AND TEAR, OUTDOOR USE, MISUSE (INCLUDING USE OF THE PRODUCT FOR AN
UNINTENDED APPLICATION, FREEZING WATER, ABUSE, NEGLECT OR IMPROPER OR
INCORRECTLY PERFORMED ASSEMBLY, INSTALLATION, MAINTENANCE OR REPAIR, INCLUDING
FAILURE TO FOLLOW THE APPLICABLE INSTALLATION, CARE AND CLEANING INSTRUCTIONS.
Notice to residents of the State of New Jersey: The provisions of this
warranty, including its limitations, are intended to apply to the fullest
extent permitted by the laws of the State of New Jersey
Additional Rights
- This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province.
- This is Brizo Kitchen & Bath Company’s exclusive written warranty, and the warranty is not transferable.
- If you have any questions or concerns regarding our warranty, please contact us as provided above or visit our website at www.brizo.com.