eufy T8414J21 Indoor Cam Mini 2k HD Wi-Fi Pan and Tilt Security Camera User Guide

: June 5, 2024
: Eufy

Table of Contents

eufy T8414J21 Indoor Cam Mini 2k HD Wi-Fi Pan and Tilt Security Camera
PRODUCT OVERVIEW
POWERING INDOAORCAM
Follow on-screen instructions to complete the setup.
MOUNTING INDOORCAM
SETTING ANGLES
FCC Statement
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eufy T8414J21 Indoor Cam Mini 2k HD Wi-Fi Pan and Tilt Security Camera

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.

PRODUCT OVERVIEW

eufy-T8414J21-Indoor-Cam-Mini-2k-HD-Wi-Fi-Pan-and-Tilt-
Security-Camera-img-1

Lens
Microphone
SD card slot
Status LED
Speaker
Power input
SYNC button

POWERING INDOAORCAM

ADDING TO EUFY SECURITY APP

Download and install the eufy Security app, then sign up for an account.

Follow on-screen instructions to complete the setup.

Status LED	Description
Blinking blue slowly	Ready for setup.
Blue	Working properly.
Blinking red slowly	Disconnected from the Internet.
Blinking red once	Motion or sound detected.
Red	Someone is watching a live

stream or recording an event.

Purple| Initializing system.
Alternating blue and

red

| Upgrading firmware.

MOUNTING INDOORCAM

Select a Location
The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling.

Keep the camera at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. Do this to avoid infrared reflection which can have a negative impact on the night vision performance. eufy-T8414J21-Indoor-Cam-
Mini-2k-HD-Wi-Fi-Pan-and-Tilt-Security-Camera-img-2

Ceiling Mount

Place the positioning card against the ceiling and then mark the points.
Drill holes with a 5/16” (8 mm) drill bit.
Insert the anchors into the holes, align the holes on the mounting plate with those in the ceiling, and fix the screws with a Phillips-head screwdriver to fasten the mounting plate to the ceiling.
Align the grooves with the mounting plate and rotate the camera clockwise until it clicks into place.

Wall Mount

To mount the camera on a wall, we recommend using a mounting bracket (not provided) as illustrated below.

SETTING ANGLES

Open the eufy Security app, and set a default angle and a privacy angle for the camera on Camera Settings > Angle Settings.

Default Angle

The camera will automatically rotate to this angle when turned on and when motion tracking ends.

Privacy Angle

If Privacy Mode (Camera Settings > Privacy Mode) is turned on, the camera will be turned off and automatically rotates to the privacy angle you set. If no angle is set and Privacy Mode is turned on, the camera will turn 180° from the Default Angle.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements.
The device can be used in fixed/mobile exposure conditions.
The min separation distance is 20cm. Notice: Shielded cables connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company

Name

POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone: 1-800-988-7973

IC Statement

This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.

IC RF Statement

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device to strong sunshine or too wet environment. The suitable temperature for T8414 and accessories is-20°C-45°C (-4°F – 113°F). When supplying, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to supply the device in an environment with a temperature that ranges from 5°C~25°C. Please ensure to use only the adapter offered by the manufacturer. Using an unauthorized adapter may cause danger and violate the authorization of the device and the guaranteed article. This adapter is for indoor use only. The output voltage/current of the adapter is 5VDC/1A. The plug is considered as a disconnect device of the adapter. Wi-Fi Operating Frequency Range: 2412~2462MHz; This product is designed and manufactured with high quality materials and components, which can be recycled and reused.