Tenda SP9 Smart WiFi Plug with Energy Monitoring Installation Guide
- June 5, 2024
- Tenda
Table of Contents
Tenda SP9 Smart WiFi Plug with Energy Monitoring
Installation
Product appearance may differ from your actual product due to different regional power specifications.
FAQ
Q1: What devices can I control with the Smart Plug?
A1: You can control desk lamps, coffee makers, humidifiers, tower fans, and
any other small household appliances whose rated power does not exceed the
maximum power of the Smart Plug.
Q2: What should I do when the LED indicator of the Smart Plug lights solid
orange?
A2: Try the following solutions:
-
Check whether the WiFi network of your wireless router is enabled. If not, enable it.
-
Check whether the WiFi name or password of your wireless router is changed.
If so, reset the Smart Plug, and connect it to your wireless router again with the new WiFi name or password. -
Reset the Smart Plug, and reconfigure it using the Tenda Beli App.
Reset method: Hold down the button of the Smart Plug for about 5 seconds and release it when the LED indicator blinks orange.
Q3: How to control the Smart Plug with voice-activated devices, such as Amazon
Alexa or Google Assistant?
A3: In your Tenda Beli App, tap the Smart Plug on the Device page, then (for
Amazon Alexa) or (for Google Assistant) to get the help.
For more questions, please visit www.tendacn.com/en/faq/defauft.htmf to get online support.
Configure the Smart Plug
Note:
- The Smart Plug only supports a 2.4 GHz WiFi network.
- The default SSID {WiFf name) of the Smart Plug is Tenda_Smart Plug_xxxx. XXXX indicates the last four characters of its MAC address which can be found on the device.
- Download the Tenda Beli App onto your mobile WiFi-enabled device, such as a smart phone, by searching for Tenda Beli in the App Store or Google Play or by scanning the QR code. Then, install the App.
- Follow the instructions in the App to configure your Smart Plug.
CE Mark warning
This Is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures
This equipment should be installed and operated with a minimum distance of
20cm between the device and your body.
NOTE:
- The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment.
- To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable
For PLUGGABLE EQUIPMENT, the socket-outlet shalt be installed near the equipment and shall be easily accessible.
For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use
RECYCLING
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment
Operating Temperature: o·c- 40*C
Operating Humidity: (10%-90%) RH, non-condensing
Technical Support
Shenzhen Tenda Technology Co .. Ltd
6-8 Floor, Tower E3, N0.7001, Zhongshanyuan Road, Nanshan District. Shenzhen,
China. 518052
- USA hotline: 1-800-570-5892
- Website: www.tendacn.com
- Toll-Free: 7 x 24 hours
- E-mail: support@tenda.com.cn
- Hong Kong hotline: 00852-81931998
- Global Hotline: +86 755-2765 7180 (China Time zone)
Copyright
© 2020 Shenzhen Tenda Technology Co., Ltd. All rights reserved
TENDA is a registered trademark legally held by Shenzhen Tenda Technology
Co .. Ltd. Other brand and product names mentioned herein are trademarks or
registered trademarks of their respective holders. Specifications are subject
to change without notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>