NATIVE UNION SN2IN101 Snap 2-In-1 Magnetic Wireless Charger Instruction Manual
- June 5, 2024
- NATIVE UNION
Table of Contents
SNAP 2-IN-1
MAGNETIC
WIRELESS CHARGER
SN2IN101
v1.1
TITLE
SNAP-2IN1-WL-BLK Snap Magnetic 2-in-1 Wireless Charger-black
Instruction manual
SCALE
100%| VERSION
1.1
SIZE
85mm (H) x 430mm (W)| DATE
27 JUL 2021
COLOR & PAPER
Print Black on white paper| FINISHING
Folding
SPECIFICATION
| 1 | INPUT | 9.0V 2.22A; 12.0V 1.67A; |
|---|---|---|
| 2 | OUTPUT | 5W / 7.5W / 10W |
| 3 | OUTPUT 5W | OUTPUT 5W |
REGULATORY INFORMATION
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna | Increase the
separation between the equipment and receiver | Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected |
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. FCC ID: X3QSN2IN101
RSS STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device. This
equipment complies with IC RSS102 radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body. IC: 23711-SN2IN101
SAFETY INFORMATION
- This product is intended for home & office use.
- For indoor use only.
- consult local sta before using the product near medical or industrial equipment or onboard an aircraft.
- Prevent cables from being pinched or damaged.
- A damaged cable or device may malfunction and/or overheat. (Fire hazard).
- Unplug the product if not used for an extended period of time.
EUROPE – DECLARATION OF CONFORMITY EU / UK
Hereby, Design Pool Limited declares that the product SN2IN101 is in
compliance with EU Directive 2014/53/EU and the UK
Radio Equipment Regulations.
The full text of the EU/UK
DoC is available online:
nativeunion.com/product-documentation
Manufacturer:
Design Pool Limited
33/F, 88 Hing Fat Street, Hong Kong
support@nativeunion.com
EU: Design Pool SAS
146 rue Montmartre, 75002 Paris, France
Made in China
| native union
---|---
| native union
| native_union
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>