NATIVE UNION SN3IN101 Snap 3 In 1 Magnetic Wireless Charger Instruction Manual
- June 5, 2024
- NATIVE UNION
Table of Contents
SNAP 3-IN-1 MAGNETIC WIRELESS CHARGER
SN3IN101
V 1.3
SPECIFICATION
1A INPUT 15.0V 3.0A
1B OUTPUT 7.5W (f120 kHz – 130 kHz)
1C OUTPUT 5W ( fill kHz – 148 kHz)
1D OUTPUT USB-C 15W (5.0V 3.0A)| 2A USB-C 5.0V 1.0A
2B 2.5W| 3A INPUT 100-240V 1.5A 50/60Hz
3B OUTPUT 15.0V 3.0A
---|---|---
REGIONAL PRODUCT VARIATIONS
SNAP MAGNETIC 3-IN-1 WIRELESS CHARGER-BLACK-ASN
SNAP MAGNETIC 3-IN-1 WIRELESS CHARGER-BLACK-EU SNAP MAGNETIC 3-IN-1 WIRELESS CHARGER-BLACK-US
REGULATORY INFORMATION
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that: to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help. FCC ID: X3OSN3IN101
RSS STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device. This
equipment complies with RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 10cm between the radiator and your body. IC:
23711-SN3IN101
SAFETY INFORMATION
This product is intended for home Er office use.
- For indoor use only.
- Const4t local staff before using the product near medical or industrial equipment or on board an aircraft.
- Prevent cables from being pinched or damaged.
- A damaged cable or device may malfunction and/or overheat. (Fire hazard).
- Unplug the product if not used for an extended period of time.
TITLE
SNAP-31N1-WL-BLK
Snap Magnetic 3-in-1
Wireless Charger-black
Instruction manual
SCALE
100%| VERSION
1.1
SIZE
117mm (H) x 490mm (W)| DATE
8 OCT 2021
COLOR Er PAPER
Print Black on white paper| FINISHING
Folding
EUROPE – DECLARATION OF CONFORMITY EU / UK
Hereby, Design Pool Limited declares that the product SN3IN101 is in
compliance with EU Directive 2014/53/EU and UK Radio Equipment Regulations.
The full text of the EU/UK DoC is available online: nativeunion.com/product-
documentation
Manufacturer: Design Pool Limited
33/F, 88 Hing Fat Street, Hong Kong
support@nativeunion.com
EU: Design Pool SAS 146 rue Montmartre, 75002 Paris, France
Made in China https://www.nativeunion.com/info/sn3in101
native union
native union
native_union
nativeunion.com