NATIVE UNION TB-G-4C140-1-DPUS 140W Fast GaN Charger Instruction Manual
- June 13, 2024
- NATIVE UNION
Table of Contents
TB-G-4C140-1-DPUS 140W Fast GaN Charger
Instruction Manual
SAFETY INFORMATION
- This product is intended for home & office use.
- For indoor use only.
- Do not drop the product or submit it to impact.
- Do not place the product in an area exposed to heat, direct sunlight, dampness, moisture, rain, vibration, shock, dust or sand, excessive vibration or near any kind of magnet.
- The connector of this transformer cannot be replaced.
- The disconnection from line voltage is made by pulling the mains plug
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Unplug the product if not used for an extended period of time.
SPECIFICATION
A INPUT →
100-240VAC, 50/60Hz, 0.6A max
OUTPUT → Total 140W max, USB PD3.1 (5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/5A;
28V/5A max) (PPS: 3.3-21V 5A max; AVS: 15V-28V 5A max)BR Number: 61038161-000
Total Output: 140W USB PD3.1 / Multi-4 ports: up to 125W
Average Active efficiency: 88.493%
Efficiency at low load: 78.1% No-load power consumption: 0.098W
REGULATORY INFORMATION INFORMATIONS
FCC Statement (USA) FCC responsible
party: Wilson Tech Service LLC 1312 17th Street Suite 692, Denver, CO. 80202,
US Tel. +1 213-397-2158
eMail: support@nativeunion.com
CONFORMS TO UL STD.62368-1 I CERTIFIED TO CSA STD. C22.2 NO. 62368-1 I CAN-
ICES-3(B)/NMB-3(B)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class 6 digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
EUROPE – DECLARATION OF CONFORMITY EU / UK
Hereby, Design Pool Limited declares that the product meets safety standard
IEC62368-1:2014 (2nd ed). Furthermore product TB-G-4C140-1-DPEU is in
compliance with EU Directive 2014/30/EU and product TB-G-4C140-1-DPUK complies
with UK Electrical Equipment Safety Regulations.
The full text of the EU/UK DoC is available online: A nativeunion.com
/product-documentation
Manufactured by Shenzhen Toptrone Technology Co. Ltd, 201, Building Al, Fuhai
62 District, Fuyong Community, Fuyong Street. Bao’an District, China
Design Pool Limited, 33/F, 88 Hing Fat Street. Hong Kong EU: Design Pool SAS,
146 rue Montmartre 75002 Paris, France
UK Authorised Representative: Eurolink (Europe) Limited, Milestone House,
Longcot Road, Shrivenham SN6 8AL, UK
support@nativeunion.com Made in China
https://www.nativeunion.com/info/fast140
nativeunion
nativeunion
native_union
nativeunion.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>