ReXING V5 Plus Dash Cam 3 Inch LCD Voice Control User Guide
- June 5, 2024
- Rexing
Table of Contents
- ReXING V5 Plus Dash Cam 3 Inch LCD Voice Control
- Overview
- What’s in the box?
- Camera Overview
- Screen Icons
- Installation
- Basic Operation
- Menu Settings
- GPS Logger
- Parking Monitor
- Taking Photos
- Warranty & Support
- FCC ID: 2AW5W-V5
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ReXING V5 Plus Dash Cam 3 Inch LCD Voice Control
Overview
Thank you for choosing Rexing we hope you love your new products as much as we do. If you need assistance or have any suggestions to improve it, please contact us.care@rexingusa.com
Our support team will respond you as soon as possible. Always a surprise in Rexing.
Check us out here
- https://www.facebook.com/rexingusa/
- https://www.instagram.com/rexingdashcam/
- https://www.rexingusa.com/support/registration/
- https://www.rexingusa.com/support/product-support/
What’s in the box?
- Rexing V5 Plus Dash Cam
- Rexing V5 Rear Camera with Extension Cable (20ft)
- In-Car Power Cable (12ft)
- 3M Adhesive Mount
- USB Cable
- Cable Management Tool
- Quick Start Guide
- Safety Guide
Camera Overview
- Power Button / Screen Toggle Button
- Menu Button / Mode Button
- Up Navigation Button / Emergency Lock Button
- Down Navigation Button
- OK (Confirm) Button / Record Button
- USB Charging Port
- Micro SD Card Slot
- Rear Camera Port
- Cabin-facing camera
Screen Icons
Installation
Step 1
Install the Dash Cam Place the 3M tape on the mount and properly orient the
mount square to the roof and hood line of the vehicle.
Important!
Ensure the T-interlock on the mount is oriented in the correct direction.
Firmly press the Mount onto the windshield. Wait at least 20 minutes before
mounting the camera.On the illustration Orient the mount as shown.
Step 2
Insert the Memory Card
The Rexing V5 Plus accepts [Class 10/UHS-1 or higher] Micro SD memory cards up
to 256GB. You will need to insert a memory card before you can begin
recording. Before inserting or removing a memory card, first ensure you’ve
powered down the device. Gently push the memory card in until you hear a
click, and allow the spring release to push the card out.
Step 3
Power on the Camera and Format the Memory Card
Power on the camera by connecting the charger to the car cigarette lighter
and camera. To ensure the V5 Plus records to your memory card properly and
without error. Before you start using a new memory card, you must format the
card within the camera using the format function. Always backup important data
stored on the memory card before formatting.To format the memory card, make
sure you have inserted your memory card, then turn on the device by connecting
to a power source. Press OK to stop recording. Then press the MENU button
twice to enter the System Setup Menu. Use the and buttons and toggle to the
Format setting. Press the OK button to confirm the selection.
You may now disconnect from power. The camera will shut down after 3 seconds.
The camera should begin recording automatically the next time it is powered
on.
Step 4
Mount the Included Camera
Mount the rear camera as shown below. Use rear camera cable to connect the
rear camera to the V5 Plus camera.
Step 5
Installing the Camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the
windscreen and tuck in under the trim.Plug the Car Charger Cable into a 12V DC
power outlet or the car cigarette lighter. Connect car charger to the camera.
The camera will auto-start recording once powered on.
Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory
socket or cigarette lighter and received a charge (i.e.: the vehicle is
started).To turn the device on manually, press and hold the Power button until
the welcome screen appears.The camera will automatically start recording when
power on
Menu Settings
Power the camera On. If the camera is recording, press the OK button to stop recording.Hold the MENU button and toggle to the desired mode. Press the MENU button once to enter the settings menu for a Mode. Press the MENU button twice to enter the System Settings (Set up).
Video Recording
The camera will automatically start recording when the device receives charge.
The LED lights and red dot will blink device when recording. Press the OK
button to stop recording.
EMR Mode
To use the Emergency Record Mode, hold the button to manually record a 20
second video that is automatically saved and locked. View EMR recordings by
pressing the menu/playback button.
Video Playback
Playback of videos can be done on the device or a computer. To playback a
video on the device, toggle to the Playback mode. Use the toggle to the
desired video. Press the OK button to play. During playback use the OK
(pause), to control the video playback.To playback a video on the computer,
either use an SD card adapter or connect the device to the computer directly
using the USB cable. To playback a video using an SD card adapter, remove the
memory card and insert it into an SD card adapter. Place the adapter in the
computer.
To playback, a video using USB cable, connect the USB Cable to the device and the computer. After the device powers up, press the OK Button to select Mass Storage. On the computer, navigate to device drive. The videos are stored at: \CARDV\MOVIE. Select the video to playback.
Wi-Fi Connect
Download Rexing Connect app from the App Store/Google Play Store.
- To access and exit the app, hold down OK Button
- Open Wi-Fi settings on your phone, find “SSID” from the list, tap to connect. (Default password: 12345678)
- Open the Rexing Connect app, tap “Connect” to enter the realtime video streaming page.
- Once connected, the dash cam screen will switch to the camera view and will display “WiFi Connected” message. Using the Rexing Connect app, you can view a live preview of the dash cam screen, start / stop recording, as well as view and save your captures with your mobile device.For further instruction regarding the Wi-Fi Connect feature, please visit www.rexingusa.com/wifi-connect/.
GPS Logger
When connected to the camera, it will record the speed and location of your vehicle as you drive.You can then access this information while playing back your recordings using the GPS Video player (For Windows and Mac, available at rexingusa.com).The dash cam will automatically search for the GPS signal once it’s connected to the power source. Press the MENU button twice and go to System Settings. Toggle the GPS Speed Unit setting, and select your favorite speed unit.After a GPS signal is found, the screen icon will turn from red to green as per the below icons.0.00km/h 0.00km/h GPS function active GPS Signal (not connected)
Parking Monitor
Connect the dashcam to the Smart Hardwire Kit (need to purchase separately) to activate the parking monitor function. Please visit www.support.rexingusa.com to watch a video tutorial.
Taking Photos
To take a photo, stop video recording and hold down the MENU button.To view a photo, stop video recording and hold on MENU button to the Playback Mode. Press the and Buttons to toggle through your photos.To delete a photo, stop video recording and toggle to the Playback Mode and toggle through the videos and photos to the one you want to delete.Press the MENU to toggle the Delete option.Press the OK Button and select Delete Current or Delete All.
Warranty & Support
warranty
The Rexing V5 Plus Dash Cam comes with a full 12-month warranty. If you
register your product on our official site
(https://www.rexingusa.com/support/registration), you can extend the warranty
to 18 months.
Support
If you have any questions regarding your product, please do not hesitate to
contact us at care@rexingusa.com, or call us at
877-740-8004. Queries are typically
answered within 12-24 hours.Your opinion mattersRexing is firmly committed to
always improving our products, services, and user experience. If you have any
thoughts on how we can do even better, we welcome your constructive feedback
and suggestions.
Connect with us today at care@rexingusa.com Thank you
for choosing Rexing
FCC ID: 2AW5W-V5
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
References
- Rexing USA | Your Roadside Eyewitness
- Wi-Fi Connect
- Rexing Dash Cam (@rexingdashcam) • Instagram photos and videos
- Product Support | Rexing USA
- Rexing Product Reg II | Rexing USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>