RYOBI P26010BTLVNM 18V 18 Inch Cordless Battery Pole Hedge Trimmer User Manual

RYOBI P26010BTLVNM 18V 18 Inch Cordless Battery Pole Hedge Trimmer

See this fold-out section for all of the figures referenced in the operator’s manual.

OVERVIEW

• A – Blades
• B – Guard
• C -Four-position pivoting head
• D – Front handle
• E – Collar
• F – Intermediate shaft
• G – Lock-out
• H – Switch trigger
• I – Hedge trimmer head
• J – Power handle
• K – The blade cover
• L- Shoulder harness

• A – Power handle

• B -Front handle

• C – Collar

• D – Socket

• E – Intermediate pole

• F – Threaded Base

• G – Plug

• H – Hedge trimmer head

• A- Shoulder harness

• B – Latch

• A – Battery port (logement de batteries, receptáculo para baterías)

• B – Battery pack (bloc-piles, paquete de baterías)

• C – Latch (loquet, pestillo)

• A – Pivot button

• B – Notches

• A – Lock-out (verrouillage, seguro)

• B – Switch trigger (gâchette, gatillo del interruptor)

• A – Cutting teeth

• B – Guard’s teeth

• A – Blade cover

GENERAL POWER TOOL SAFETY WARNINGS

WARNING:
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

WORK AREA SAFETY

• Keep the work area clean and well-lit. Cluttered or dark
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. The use of a GFCI reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

GENERAL POWER TOOL SAFETY WARNINGS

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits, etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. The use of any other battery packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

HEDGE TRIMMER SAFETY WARNINGS

• Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after turn off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade stopped. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
• When transporting or storing the hedge trimmer, always fit the blade cover. Proper handling of the hedge trimmer will decrease the risk of personal injury from the blades.
• make sure all power switches are off and the battery pack is removed or disconnected. Unexpected activation of the hedge trimmer while clearing jammed material or servicing may result in serious personal injury.
• Keep all power cords and cables away from the cutting area. Power cords or cables may be hidden in hedges or bushes and can be accidentally cut by the blade.
• especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
• Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring or its own cord. Cutter blades contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• DANGER — Keep hands away from the blade. Contact with the blade will result in serious personal injury.
• WARNING — Only use with handle and guard properly assembled to hedge trimmer. The use of the hedge trimmer without the proper guard or handle provided may result in serious personal injury.

HEDGE TRIMMER SAFETY WARNINGS

EXTENDED-REACH HEDGE TRIMMER SAFETY WARNINGS

• To reduce the risk of electrocution, never use the extended reach hedge trimmer near any electrical power lines. Contact with or use near power lines may cause serious injury or electric shock resulting in death.
• Always use two hands when operating the extended-reach hedge trimmer. Hold the extended-reach hedge trimmer with both hands to avoid loss of control.
• Always use head protection when operating the extended reach hedge trimmer overhead. Falling debris can result in serious personal injury.

ADDITIONAL SAFETY RULES

• Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.
• Do not use on a ladder, rooftop, or unstable support. Stable footing on a solid surface enables better control of the power tool in unexpected situations.
• Wear heavy, long pants, long sleeves, boots, and gloves. Do not wear loose-fitting clothing, short pants, sandals, or go barefoot. Do not wear jewelry of any kind.
• Use both hands when operating the hedge trimmer. Using one hand could cause loss of control and result in serious personal injury.
• Before starting the hedge trimmer, make sure the blade is not in contact with any object.
• Stop the unit, remove the battery pack, and make sure the blade has stopped before setting the unit down.
• Never cut any material with a diameter larger than 5/8 in.
• Clear the area to be cut before each use. Remove all objects such as cords, lights, wire, or loose string which can become entangled in the cutting blade and create a risk of serious personal injury.
• Always stop the motor when cutting is delayed or when walking from one cutting location to another.
• Keep the unit clean of grass clippings and other materials. They may become lodged in the cutting blades.
• If the hedge trimmer is equipped with a debris remover, do not use the debris remover as a gripping surface.
• Store the unit inside in a dry place, either locked up or up high to prevent unauthorized use or damage. Keep out of the reach of children or untrained individuals.
• Replace blade cover when the unit is not in use.
• Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean, and free from debris. Clean after each use; see storage instructions.
• Secure the unit while transporting.
• Battery-operated units do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards even when the unit is not operating.
• Remove the battery pack before making any adjustments, cleaning, storing, or removing material from the unit, or when not in use.
• When transporting or storing the hedge trimmer always fit the cutting device cover.
• Keep the cable away from the cutting area. During operation, the cable may be hidden in shrubs and can be accidentally cut by the blade.
• Wear eye protection with side shields, which is marked to comply with ANSI Z87.1 when operating this product. Wear head protection when operating this product above shoulder level. Following this rule will reduce the risk of serious personal injury.
• Keep all bystanders, children, and pets at least 50 feet away. Bystanders should be encouraged to wear eye protection.
• In an emergency situation, use the spring clips on the quick-release shoulder harness to free yourself from the harness and the hedge trimmer.
• Never use water or any liquids to clean or rinse off your product and do not expose the product to rain or wet conditions. Store indoors in a dry area. Corrosive liquids, water, and chemicals can enter the product’s electronic components and/or battery compartment and damage electronic components and/or the battery pack, which can result in a short circuit, increased risk of fire, and serious personal injury. Remove any buildup of dirt and debris by wiping the product clean with a dry cloth occasionally.
• Use this product only with batteries and chargers listed in tool/appliance/battery pack/charger correlation supplement 988000-842.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING

• DANGER:
  Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.

• WARNING:
  Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.

• CAUTION:
  Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury.

• NOTICE:
  (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential injury (e.g. messages relating to property damage).

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

FEATURES

PRODUCT SPECIFICATIONS

• Motor……………………………………………………………..18 V DC
• Blade Length………………………………………………………18 in.
• Cutting Capacity………………………………………………..5/8 in.
• Cutting Speed………………………………………3,000 cuts/min.

KNOW YOUR HEDGE TRIMMER
See Figure 1.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

BLADE COVER
The blade cover keeps the operator from coming in contact with the sharp blades when the tool is not in use. It also helps keep the blades from being nicked or damaged when the tool is in storage.

GUARD
The guard helps to deflect chips or other debris away from the operator’s hands.

LOCK-OUT
The lock-out prevents accidental starting.

FOUR-POSITION PIVOTING HEAD
The hedge trimmer head can be adjusted with the pivot button.

UNPACKING
This product requires assembly.

• Carefully remove the product and any accessories from the box. Make sure that all items listed in the Packing List are included.
  WARNING:
  Do not use this product if any parts in the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require custom installation. Use of a product that may have been improperly assembled could result in serious personal injury.

• Inspect the product carefully to make sure no breakage or damage occurred during shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.

• If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

PACKING LIST

• Hedge Trimmer Head
• Intermediate Shaft
• Power Handle
• Blade Cover
• Shoulder Harness
• Operator’s Manual

WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.

WARNING:
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misused and could result in a hazardous condition leading to possible serious personal injury.

WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.

WARNING:
Hedge trimmer blades are extremely sharp. Do not remove the blade cover until the hedge trimmer is fully assembled and ready to use. Always use caution when removing the blade cover. Failure to comply could result in possible serious personal injury.

CONNECTING THE POLES

• Insert the plug on the intermediate pole into the socket on the power handle and push together until fully seated. The plug is larger on one side and will only install one way.
• Push the collar on the power handle to the threaded base on the intermediate pole and rotate clockwise to secure.
• Repeat this process to attach the intermediate pole to the hedge trimmer head. Be careful to avoid cross-threading.
  NOTE: When assembled correctly, the power handle and hedge trimmer head should not be able to separate from the intermediate pole when pulled. Be sure the threaded collars are tightened securely.

WARNING:
Failure to securely assemble and lock all poles together as directed above could cause the poles to separate and could result in serious personal injury or death.

ATTACHING THE SHOULDER HARNESS
See Figure 3.

• Remove the battery pack if installed.
• Connect the latches on the shoulder harness to the straphangers.
• Adjust the harness to a comfortable position.

OPERATION

WARNING:
Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.

WARNING:
Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with head protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

NOTICE:
Before each use, inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please contact customer service or an authorized service center for assistance.

APPLICATIONS
You may use this product for the purpose listed below:
Trimming and shaping hedges and shrubbery

INSTALLING/REMOVING BATTERY PACK
See Figure 4.

WARNING:
Always remove the battery pack from your tool when you are assembling parts, making adjustments, cleaning, carrying, transporting or when not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury.

To install:
Insert the battery pack into the product as shown.

WARNING:
Make sure the latch on the bottom of the battery pack snaps in place and the battery pack is fully seated and secure in the hedge trimmer battery port before beginning operation. Failure to securely seat the battery pack could cause the battery pack to fall out, resulting in serious personal injury.

NOTICE:
When placing the battery pack in the tool, be sure raised rib on the battery pack aligns with the bottom of the tool and latches into place properly. Improper installation of the battery pack can cause damage to internal components.

To remove:
Depress the latch on the battery pack and remove it from the hedge trimmer.

WARNING:
Battery tools are always in operating condition. Remove battery pack when transporting or carrying hedge trimmer to avoid accidental starting, which may result in serious injury.

For complete charging instructions, refer to the Operator’s Manuals for your RYOBI battery pack and charger models.

ADJUSTING PIVOTING HEAD
See Figure 5.

• Remove the battery pack is installed.
• Place the hedge trimmer on a sturdy flat surface.
• Push the pivot button and adjust the trimmer head until it snaps securely into place at one of the four positions indicated by the notches.
  NOTE: The trimmer will not operate unless locked into a position.

MAINTENANCE

WARNING:
To avoid serious personal injury, always remove the battery pack from the product when cleaning or performing any maintenance.

WARNING:
Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with head protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:
When servicing, use only identical replacement parts. The use of any other parts may create a hazard or cause product damage.

WARNING:
Never use water or any liquids to clean or rinse off your product and do not expose the product to rain or wet conditions. Store indoors in a dry area. Corrosive liquids, water, and chemicals can enter the product’s electronic components and/or battery compartment and damage electronic components and/or the battery pack, which can result in a short circuit, increased risk of fire, and serious personal injury. Remove any buildup of dirt and debris by wiping the product clean with a dry cloth occasionally.

NOTICE:
Periodically inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please contact customer service or an authorized service center for assistance.

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic, which could result in serious personal injury.

TRANSPORTING AND STORING

• Always place the blade cover on the blade before storing or transporting the hedge trimmer. Use caution to avoid the sharp teeth of the blade.
• Clean the hedge trimmer thoroughly before storing. Store the hedge trimmer indoors, in a dry place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

LUBRICATING THE BLADES
See Figure 10.

WARNING:
Always allow the blades of the hedge trimmer to come to a stop and remove the battery pack before lubricating. Failure to do so could result in accidental starting causing possible serious personal injury.

For easier operation and longer blade life, lubricate the hedge trimmer blade before and after each use.

• Remove the battery pack from the hedge trimmer.

• Lay the hedge trimmer on a flat surface. Apply lightweight machine oil along the edge of the top blade.
  NOTE: If you will be using the hedge trimmer for an extended time, it is advisable to oil the blade periodically.

• Stop the hedge trimmer.

• Remove the battery pack.

• Lubricate the hedge trimmer as described above.

• Reinstall the battery pack and resume use.

SHARPENING THE BLADE
See Figure 11.

• Allow the blades of the hedge trimmer to come to a stop in the position shown. This will allow clearance for the file between the cutter teeth and the guard teeth.
• Remove the battery pack from the hedge trimmer.
• Clamp the blade assembly in a vise and file the exposed cutting surface of each blade tooth with an 8 in. smooth round file, 1/4 in. or 7/32 in. in diameter. Be sure to retain the original angle of the tooth when filing.
• Remove the hedge trimmer from the vise, replace the battery pack, and restart the hedge trimmer. Allow the blades of the hedge trimmer to come to a stop so that the unsharpened edges on the other side of the cutter blade teeth are exposed.
• Remove the battery pack from the

CLEANING THE HEDGE TRIMMER

• Remove the battery pack.

• Slide the blade cover over the blade.

• Clean dirt and debris from the body of the hedge trimmer, using a damp cloth with a mild detergent.
  NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents such as kerosene.

• Moisture can cause a shock hazard. Wipe off any moisture with a soft dry cloth.

• Use a small brush or the air discharge of a small vacuum cleaner brush to clear dust or debris from the air vents on the motor housing. hedge trimmer and repeat the sharpening procedure as described above.

STORING THE HEDGE TRIMMER
See Figure 12.

• Clean the hedge trimmer thoroughly before storing. Store the hedge trimmer in a dry, well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.
• Always place the blade cover on the cutting blades before storing.

CALL US FIRST

For any questions about operating or maintaining your product, call the RYOBI Help Line!
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.

This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use). For warranty details, visit www.ryobitools.com
or call (toll-free) 1-800-525-2579.

References

• REIMAGINE WITH RYOBI - RYOBI Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>