eMoMo Technology E535US1U2WL Pop Up Multifunctional Socket Instruction Manual

: July 26, 2024
: Emomo Technology

Table of Contents

eMoMo Technology E535US1U2WL Pop-Up Multifunctional Socket
Product Information
Installations
Caution
FCC WARNING
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eMoMo Technology E535US1U2WL Pop-Up Multifunctional Socket

Product Information

Specifications

Model : E535US1U2WL
Manufacturer: eMoMo Tech Co,. Ltd
Weight: 935g
Dimensions: 265L x 117W x 68Hmm
AC Input: 120V~/60Hz
AC Socket Output: 1200W/10A Max
TYPE(A+C) Output: 18W Max
Wireless Charging Power: 5W/7.5W/10W
Main Body Material: Qi1.2.4 Aluminum Alloy
Ambient Temperature: 0~+40°C

Pop-up multifunctional socket Model No ： E535US1U2WL

0.5mm Software Type:

240（L）X112(W)±

0.5mm

Main Body Material| Aluminum Alloy
Ambient Temperature| Ambient temperature： 0~+40℃

Ambient humidity：20-

90%

| Installas convenience| Quick And Easy To Install

Charging Effect

|

Charging Very Quickly

10W max quick charging| Quick and easy to install,very safe to use
Quick-cooling graphite paster| Charging very quickly
Prepare By:Shao Peng Wu Audit:Johnson Jiang Date:24/05,23

Installations

Dimensions of Mounting Holes:

R5 111 – Hard material-type mounting holes
R5 112 – Soft material type mounting holes

Order of Installation:

Panel
Middle Cover

Hold the bottom of the product panel with both hands, align the bottom shell with the mounting hole, keep it horizontal, and slowly put it in. You can apply moderate force in the vertical direction on the surface of the plate with your hand until the bottom of the panel is tightly attached.

Then press the button 3 to 5 times ensure that the middle cover can be opened smoothly each time, and there is no stuck phenomenon, which can be regarded as successful installation.

Then close the middle cover, a protect the surface to prevent the panel and the middle cover from being scratched.

Caution

Before installation, clean the vicinity of the mounting hole to prevent foreign objects from obstructing installatio
When the middle cover is opened, do not exert too much force on the butto
When installing in soft materials, remove the sponge in the installation area and avoid turning the sponge into t installation hole. But the crust can be turned into the hole;
When the middle cover is closed, do not exert too much force, and reduce the impact on the ke
When the surface is dirty, do not use corrosive solution, can be dipped in a small amount of dishwashing detergent cotton cloth wipe clean.
Risk of Electric Shock. Do not plug into another relocatable power tap, a FPDU or an extension cor

FCC WARNING

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

FAQ

Q: What is the wireless charging power of the product?
A: The wireless charging power options are 5W, 7.5W, and 10W.

Q: What is the maximum quick charging capability of the product?
A: The product supports up to 10W quick charging.

Q: Where can I find the installation instructions for the product?
A: The installation instructions are provided in the user manual under the “Order of Installation” section.