eMoMo Technology E108V Audio Boost via Bass User Manual
- June 5, 2024
- Emomo Technology
Table of Contents
eMoMo Technology E108V Audio Boost via Bass
SAFETY WARNING
Thank you for using our E108 Bluetooth sound system! Before using this unit please, read the manual.This audio system was for indoor use only Do not place the apparatus in direct sunlight or heat.Do not attempt to repair this product as the warranty will be void, please contact with the store or customer service. Trying to remove panels or repairing the unit by yourself could result in an electric shock. This item should be connected to an AC 1 00V-240V Power outlet.Do not use chemicals on this product.
INSTALLATION REQUIREMENTS
- Ensuring that all required parts for complete installation are provided.
- Power must be switched off before installing.
- Ensuring the connections between each items are fastened.
NO. | PARTS | QTY. |
---|---|---|
G) | Audio leg-Boost control box | lpcs |
(2) | Audio leg-Boost speaker | lpcs |
@ | Extension cord | lpcs |
@8 | Power extension cord | lpcs |
® | screw | 2pcs |
®. | Vibrator | lpcs |
® | screw | 3pcs |
® | gasket | 3pcs |
@ | Power supply | lpcs |
(J) | User manual | lpcs |
Basic operation
- Once power is supplied, the E108 Bluetooth audio kit begins to search the pairing device automatically. It keeps searching until it pairs with another device successfully. It could only pair with one Bluetooth device. If you want to pair with another device, disconnect the paired one, then connect with the new one.
- The Remo4 Bluetooth audio kit could be controlled via the paired Bluetooth Previous track/ Next track, Increase volume/ Decrease Volume, Pause/ Play.
- Description of Bluetooth: Audio Leg-Boost
- Bluetooth reproduction rang: 8m.
- The vibrator vibrates accompanied by bass.
Specification
Method of installation
Frequently Asked Questions
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>