eMoMo REMO423 Moto Audio Bluetooth Sound System User Manual
- June 13, 2024
- eMoMo
Table of Contents
eMoMo REMO423 Moto Audio Bluetooth Sound System
Product Information
The Remo4.23 is a stand-alone audio device that can be connected to a mobile phone via Bluetooth for music playback control. It operates on a 29V power supply and has a rated power input of 2A, with a total sound power output of 58W (7.5W per channel). The device uses Bluetooth version 5.0 for wireless connectivity.
Common Troubleshooting
- Problem/Issue: No sound at all
Possible causes and solutions
- The volume switch is on minimum: Adjust the volume switch to increase the sound level.
- The unit is not set to the correct function: Ensure that the device is set to the appropriate function for audio playback.
- Please contact the store or customer service for further assistance.
- Problem/Issue: Bluetooth cannot pair
Possible causes and solutions:
- Close all other pairing devices and retry: Make sure there are no other devices trying to pair with the Remo4.23 and try pairing again.
- Wait a few seconds or restart the machine: Give the device some time or restart it before attempting to pair again.
- Do not pair the devices behind a wall or in a corner: Ensure that the Remo4.23 and the mobile phone are within 8 meters of each other without any obstructions.
- Pair the device named Remo4: When searching for Bluetooth devices, look for the name “Remo4” and select it for pairing.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits for an
uncontrolled environment. It is recommended to install and operate the device
with a minimum distance of 20cm between the radiator and your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. It may not cause
harmful interference and must accept any interference received, including
interference that may cause undesired operation.
NOTE 2
Any changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
Product Usage Instructions
- Connect the Remo4.23 to a power supply using a 29V DC head.
- Power on the Remo 4.23.
- Open the Bluetooth settings on your mobile phone.
- Search for Bluetooth devices and select “MOTO AUDIO” to pair with the Remo4.23.
- Once the pairing is successful, you will hear a voice prompt saying “Device paired”
- Turn on your phone’s music player and start playing music.
- Use the Remo4.23 to control various music playback functions on your mobile phone, such as play/pause, previous track, next track, volume increase, and volume decrease.
Operating instructions
(Stand-alone mode)
- Connect the products according to the assembly drawing.
- Connect the DC head to the 29V power supply and power it on.
- Open the Bluetooth of the mobile phone, search the Bluetooth name: MOTO AUDIO, and pair.
- After successful pairing, the voice prompt: device paired. Turn on your phone songs and play music. And implemented on the mobile phone, music pause/play, the last song, the next song, volume plus, volume minus control.
(Dual-machine mode (Product A and Product B)
- Connect product A and product B according to the assembly drawing.
- Insert the AUX In the head of product A into the hole of the control box of product B and connect them together.
- Connect the DC heads of product A and product B to a 29V power supply respectively to power up.
- Open the Bluetooth of the mobile phone, search the Bluetooth name: MOTO AUDIO, and pair.
After successful pairing, the voice prompt: device paired. Turn on your phone songs and play music. And implemented on the mobile phone, music pause/play, the last song, the next song, volume plus, volume minus control. Product parameters
Product parameters
| Power Input | 29V2A |
|---|---|
| Rated power | 58W |
| Sound power | 7.5W*2 |
| Bluetooth version | 5.0 |
Common troubleshooting
Problem/Issue
|
Possible causes and solutions
---|---
No sound at all| The volume switch is at the minimum;
the unit is not set to the correct function;
Please contact the store or customer service.
Bluetooth can not pair| Please close all other pairing machines and retry; Please wait a few seconds or restart the machine;
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- reorient or relocate the receiving antenna.
- increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>