rockmia EBS-908 Neckband Bluetooth Speakers User Manual
- June 5, 2024
- rockmia
Table of Contents
**EBS-908
**
Neckband Bluetooth Speakers
User’s Manual of Model EBS-908
Thanks for purchasing our Neckband bluetooth Speakers. This manual will give you better use of this Bluetooth speaker. Please carefully understand the Bluetooth function of your playback device before using this Bluetooth speaker.
Product Overview:
How to use this speaker
Connecting the Bluetooth device:
- Enter Bluetooth status automatically after long-press the “Power ” button, the blue indicator light blinks quickly.
- Turn on the Bluetooth function of your mobile phone or other Bluetooth devices, search for “EBS-908” on your device’s Bluetooth list, and then pair it. The indicator light blinks slowly after pairing successfully.
- You can short press the “Play/Pause ” button to play or pause the music. Long press “+ ” for the next track or “- ” for the previous track. Short press “+ ” or “- ” for volume up or volume down.
- When the speaker is powered off, you can long-press the “Power ” button for about 9 seconds to reset the Bluetooth connection and reset it into pairing mode. It works like this: Keep pressing-A seconds (Power on)–keep pressing–9 seconds (Pairing mode).
Hands-free function
This speaker has a built-in microphone. Therefore, you may use it to answer telephone calls as a hands-free device.
- When the speaker is playing music via Bluetooth, the music will pause and you will hear the ringtone in case of any incoming call, you can short press the “Hand-free ” button to answer the call via built-in MIC. Short press the “Hand-free ” button again if you want to hang up the call after the conversation.
- You may long-press the “Hand-free ” button to decline an incoming call if you don’t want to answer the call.
Charging
Connect the USB cable to a USB power adapter, then plug the micro USB into the micro USB port of the speaker. While charging, the indicator light is always red. When it is fully charged, the indicator light turns off.
ECO model
If there is no connection within 10 minutes after power on, the speaker will
automatically power off.
Troubleshooting
- Why I can find the speaker in the Bluetooth list of my playback device, but could not connect with it successfully? Power off the speaker, then long-press the “Power” button for about 9 seconds to reset the Bluetooth connection and reset it into pairing mode. It works like this: Keep pressing-4 seconds (Power on)—keep pressing-9 seconds (Pairing mode). Then try to connect it again.
Q: The wireless connection is not stable. The music interrupts from time to
time.
A: Sometimes the other wireless signals will disturb the connection stability.
- Please make sure the connection distance is not more than 20 meters and there is nothing blocking between the speaker and the device.
- Make sure there is no other wireless devices such as wireless router near the speaker. 3. Make sure the speaker has enough power.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are. designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>