xiaomi VXN4305GL Redmi 10000mAh Powerbank User Manual
- June 5, 2024
- Xiaomi
Table of Contents
xiaomi VXN4305GL Redmi 10000mAh Powerbank
Read this manual carefully before use, and retain it for future reference.
Product Overview
Thank you for choosing the 10000mAh Redmi Power Bank. This high-capacity power bank features a high-quality lithium polymer battery and a charging and discharging chip with excellent performance in superior safety, efficiency, and compatibility.
Notes:
- The battery level check button is not a power button.
- The power bank automatically detects charging and discharging.
- The power indicator turns off after about 2 minutes of being fully discharged.
- Safety: The power bank has multiple safeguard technologies to prevent overcharging, over-discharging, overheating, and short circuit in any working conditions.
- Compatibility: Built-in smart USB charge controller, compatible with most smartphones, tablets, and devices.
- Quality: High-quality lithium polymer battery and durable charging and discharging chip.
Charging
Connect a Mi power adapter to the power bank via USB-C or Micro-USB port to charge. The indicator shows the following charging conditions:
Discharging
This power bank uses a USB-A port to charge other devices. When discharging, the indicator displays the battery level as follows:
Low-current Discharge: When the power bank is not charging, double press the battery level check button to enter low-current discharge mode. In this mode, it can be used for charging small devices such as Bluetooth headsets and smart bands, and the indicators will be lit on one by one. To exit the low-current discharge mode, press the battery level check button. The device will automatically exit this mode after two hours.
Warning
Improper use may result in battery failure, overheating, or even fire or explosion. In order to avoid harm to your personal safety and property, please keep and use this product strictly in accordance with the following requirements:
- This product is not a toy. Please keep it out of reach of children at all times to avoid accidents.
- Make sure the charger for the power bank complies with local safety standards to prevent electric shock and battery damage.
- Do not press, strike, drop, or subject the device to strong vibrations, or expose it to liquid, as any of these actions could short circuit or damage the battery or circuit. If this happens, stop using the device immediately and dispose of it properly.
- If the device becomes swollen, deformed, begins to leak, or its capacity is significantly reduced, please stop using it immediately and dispose of it properly.
- Do not charge or discharge this product in a clothing pocket, closed bag, or on a bed or sofa or in any other place which could hinder its heat dissipation.
- Make sure the product is not covered by clothing, pillows, bedding, or other items while charging or discharging. When charging other devices such as mobile phones for a long period of time, do not stack this product with other such devices in order to ensure optimal heat dissipation of all devices.
- Do not dismantle, crush, puncture, or short circuit the product or expose it to liquids, fire, heat sources such as stoves, heaters, or an environment with an ambient temperature higher than 60°C (140°F).
- Do not leave this product in a car outdoors or other place with sun exposure during hot weather.
- This product contains a lithium polymer battery. To prevent battery damage and other safety hazards, never open the product case.
CE
We Zimi Corporation, hereby, declare that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
Precautions
- Please make sure to fully charge the product on its first use.
- Use an appropriate charger and USB cable (Mi brand products are recommended) to charge the power bank and other devices.
- Do not leave this product unattended while charging, and remove it from the power supply before going out or leaving it unattended for a long time.
- Once this product is fully charged, or after it is used to fully charge another device, unplug the charging cable in a timely manner to prevent damage.
- If there is no power indication after the button is pressed, the product may be in its protection state. To restore it, try connecting the device to an external charger.
- When not using this product for a long time, keep its power level at about 25% to 50% and store it in a cool, dry environment. To extend battery life, avoid storing this product at full or no power for long periods of time.
Specifications
- Model: PB100LZM
- Battery Type: Lithium polymer battery
- Cell Capacity: 37 Wh 3.7 V (10000 mAh)
- Rated Capacity: 5500 mAh (5.1 V/2.6 A)
- Operating Temperature: 5°C to 35°C
- Item Dimensions: 150.5 × 73.6 × 15.1 mm
- Input Port: Micro-USB/USB-C
- Output Port: USB-A
Input
- 5 V=2.1 A (Charging the power bank via Micro-USB/USB-C)
- 5 V=2.4 A (Charging the power bank via Micro-USB/USB-C, while charging a device via one of the USB-A ports at a current of 2.4 A)
- 5 V=2.6 A (Charging the power bank via Micro-USB/USB-C, while charging two devices via both USB-A ports at a current of 2.6 A)
- Output: (Single-port USB-A) 5.1 V=2.4 A
- (Dual-port USB-A) 5.1 V=2.6 A
- Charging Time: Approx. 7.5 hours (5 V/2 A charger, charging cable included)
WEEE
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Anti-counterfeit Label Instructions
Each 10000mAh Redmi Power Bank comes with an anti-counterfeit label on the outer package. Scratch off the label and enter the code at http://chaxun.mi.com to ensure yours is a genuine product.
Scratched-off Coating
For further information, please go to www.mi.com
Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Zimi
Corporation (a Mi Ecosystem company)
Address: A913, No. 159 Cheng¦iang Road, Jiangyin, Jiangsu, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>