EBL LN-6105 Smart USB Battery Charger Fast User Manual
- June 5, 2024
- EBL
Table of Contents
LN-6105 Smart USB Battery Charger Fast
User Manual
Thanks for purchasing EBL® products.
Please read this user manual carefully before using it for safety purposes.
Product instruction
Product Overview
- The charger is compatible with 2/4 AA/AAA Ni-MH Ni-CD rechargeable batteries.
- \Smart charger with USB port, much convenient for travel and daily life.
- LED to show its charging progress, more personality.
- With an advanced MCU control system, intelligent V, and – V cut-off charging method, the charger turn to trickle charging automatically to prevent the batteries from over-voltage, over-current, or over-heat.
Specification of charger
Input: 5V =1.0A
Output: 1.2V =1800mA AA 1800mA AAA 900mA
Charging rate 85%
Storage and working temperature
Using environment temperature: 0-35°C; humidity 7- 80%;
Storage environment temperature: -10-40°C; humidity =1:60%; working
temperature:
Surface temperature of charger/battery •,-= 60t
How to use the charger
- Place the battery into the charger and make sure the “4-/-” pole of the battery matches the “+/-” pole of the charger completely.
- Connect the charger with 5V USB devices like a power bank, adapter, etc.
- LED shows its charging progress: Red — Charging; Green — Fully charged.
- The charger charges AA AAA Ni-MH Ni-CD rechargeable batteries in pairs (2/4) only.
Cautions of charger
- Please use the charger indoors and at a temperature between 0-35°C.
- The charger charges compatible batteries only, do not charge another type of battery.
- The charger can only charge batteries in pairs, please do not charge batteries of different types or different capacities under 1 LED.
- It is normal that the battery to get warmer than room temperature during charging. The battery will cool down to room temperature after being fully charged.
- Cut off the power and take the batteries out when batteries get fully charged.
Warnings of charger
- Children should use the charger under adults’ supervision.
- It may cause an electric shock hazard if using the charger incorrectly.
- Do not disassemble or reassemble the charger.
- Don’t charge 1.5V alkaline or carbon battery, otherwise, they will leak or cause an explosion.
- Please keep the charger out of reach of children.
- Indoor use only, keep it away from moisture and heat.
Common troubleshooting
When the charger LED keeps red and flashing while charging, it may be caused by the following reasons:
| Problem | Reason | Solution |
|---|---|---|
| Abnormal voltage | Battery voltage over 1.75V | Check if the battery is 1.2V Ni- |
MH/Ni-CD rechargeable battery
Abnormal temperature| Temperature over 60°C| Stop charging at once until the
temperature decreased to room temperature
Activation failed| Battery’s voltage<0.75V when activating for more than 15
seconds| Take the battery out and try again. If the problem still exists, the
battery is broken.
Size & weight
| Size | 66’75’31.8mm |
|---|---|
| Weight | 66.1 ±0.5g |
Warranty from EBL
- 30 days of worry-free money back and a one-year limited warranty.
- Any suggestions and problems please feel free to contact us at: service@eblmall.com
- Official website: www.eblmall.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>