EBL TB-6036 Rechargeable Battery Charger User Manual
- June 4, 2024
- EBL
Table of Contents
EBL TB-6036 Rechargeable Battery Charger
Thanks for purchasing EBL’s products!
For your own safety, please read this user manual carefully before using it.
User Manual
Features
- EBL-C9036W can charge 12 pieces of AA’AAA Ni-MH batteries or 6 pieces of C/D Ni-MH batteries and 2 pieces 9V batteries at most. All types of batteries can be charged at the same time.
- Compatible with: AAIAAA/C D Ni-MH Ni-CD rechargeable batteries and 9V Ni-MH Ni-CD Li-ion rechargeable batteries.
- With advanced MCU control system, intelligent V and – V cut-off charging method, the charger turns to trickle charging automatically to prevent the batteries from over-voltage,over-current and over-heat.
- With charging process shown on LCD screen, battery status can be easily monitore
- If the voltage of the battery is under 0-0.9V, the charger can refresh battery itself.
Specifications
Input: 100-240VAC 50/60Hz 0.3A MAX
No-load Power Consumption: 1.0 W(Max)
Full-load Power Consumption: 30 W(Max)
Charging Way: Constant voltage and current
Working Environment Condition
- Storage Temperature: -10 C- 50C
- Storage Humidity: 45% 85%
- Working Temperature: 0C-35C
- Working Humidity: 35% – 95%
How to Use
-
Please use the power cable provided by us.
-
Make sure the battery is placed correctly so that the “+/” pole of the battery corresponds to the “+/” of the charger.
-
Plug AC cable and power on: LCD screens become light and show every character on screen first, then character disappear.
-
Charging status:
Charging AA/AAA/CID Ni-MH Ni-CD rechargeable batteries: LCD screen displays character “CHG” means charging & installing correctly.
Charging 9V rechargeable batteries: LED shows the charging progress, RED – Charging; Green – Fully Charged -
Fully charged: Displaying fully battery and no more “CHG”.
Notice
- The charger can charge each battery independently.
- The LCD will be light after power-on, showing”CHG”and the power status when battery is placed correctly. The power status is displayed solid only when the battery is fuly charged.
- When non-rechargeable batteries were put in, or there’s short-circuit situation, the charger will show”ERROR”.
- The absolute 0 Volt battery can not be charged in this charger.
- EBL-C9036W is ONLY designed for AA/AAA/C/D Ni-MH NI-CD and 9V Ni-MH Ni-CD Li-ion rechargeable batteries. Please DO NOT put any other types of batteries in this charger, especially alkaline batteries.
- If the LCD display doesn’t show’CHG”when you put batteries in, please check if the battery is 0 Volt. Make sure the t/- pole of battery matohes the t/-pole of charger.
- New battery will reach the best performance after using 3-5 times.
- Battery power will lose because of long-time storage. Please charge the battery fully if it is not used for long time.
- It’s normal that the battery becomes hot while charging. The temperature will cool down to normal later, please feel free to use it.
Cautions
- Turn off the charger and take the batteries out after charging is completed.
- DO NOT disassemble and reassemble the charger. Or it may cause short-circuit.
- DO NOT charge batteries whose cover are damaged, or it may cause short circuit and fire hazard.
- DO NOT charge non-rechargeable batteries. It might cause battery leakage,battery explosion, personal injuries, etc.
- DO NOT put anything on the charger while charging batteries, it will accumulate heat to cause fire hazard.
- Indoor use only, keep it away from direct sunlight and moist/high-temperature environment.
- Children should not use this charger without any adulť’s supervision.
- Store this charger out of reach by children.
Size & Weight
Warranty
We provide 30 days worry-free money back and one year limited warranty
Any problems, please feel free to contact us:
service@eblmail.com
Website: www.eblmall.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>