EBL RM-76 Professional Batteries Charger User Manual

Table of Contents

EBL RM-76 Professional Batteries Charger User Manual

2500mAh AA: approx.120min-240min
No-load Voltage| 5V
Battery Charging Rate| Up to 80%

EBL RM-76 battery charger, with smart LCD display & independent charging slot, can charge 1-8pcs AA/AAA Ni-MH rechargeable batteries freely.
Smart charger with iQuick technology, whose output is up to 2000mA, effectively charging batteries, and saving your time.
Safety ensured, advanced MCU control system, intelligent AV and -AV cut-off charging method, constant current & constant voltage safety model, the charger turns to trickle charging automatically, providing overcharge, over discharge, short circuit, and battery reverse protection.
Automatically activate the battery with low voltage(0.5V), automatically identify non-rechargeable batteries and broken batteries.
Charging process is shown on LCD screen to easily monitor the battery status.
Standard AC voltage input, worldwide application.

Plug in the AC cable and power on: LCD screen lights up and shows every character on screen first, then character disappear.
Make sure the batteries are placed correctly, making the”+/-” poles of the batteries are corresponding to the”+/-“of the charger.
Charging status: Independently show the charging status of each battery in the form of battery icon.
If the charging is abnormal (loaded with non-rechargeable battery or broken battery), the corresponding icon will flash.

Charging status	Abnormal charging

<20% flashing

|

<20% flashing

Keeping flashing

Notices

EBL RM-76 battery charger is ONLY designed for AA/AAA Ni-MH rechargeable batteries. Please DO NOT put any other types of batteries in this charger, especially alkaline batteries.
Please use the AC cable provided by EBL.
Please make sure the +/- pole of battery matches the +/- pole of the charger correctly.
The charger can charge each battery independently.
When non-rechargeable batteries or broken batteries are put in, the corresponding icon will flash all the time.
New battery will reach the best performance after using 3-5 times.
Battery power will lose because of long-time storage. Please charge the battery fully if it is not used for a long time.
It’s normal that the battery becomes hot while charging. The temperature will cool down to normal later, please feel free to use it.

Turn off the charger and take the batteries out after charging is completed.
DO NOT disassemble and reassemble the charger, or it may cause short-circuit.
DO NOT charge batteries whose covers are damaged, or it may cause short circuit and fire hazard.
DO NOT charge non-rechargeable batteries. It might cause battery leakage,battery explosion, personal injuries, etc.
DO NOT put anything on the charger while charging batteries, it will accumulate heat to cause fire hazard.
Indoor use only, keep it away from direct sunlight and moist/high-temperature environment.
Children should not use this charger without any adult’s supervision.
Store this charger out of reach of children.