COSTWAY SP37606 3 Wheel Steel Golf Push Cart Trolly User Manual
- June 5, 2024
- COSTWAY
Table of Contents
COSTWAY SP37606 3 Wheel Steel Golf Push Cart Trolly
With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
USER’S MANUAL
- Hand grip
- Scorecard holder assembly
- Handle frame
- Upper bag holder bracket assembly
- Adjustable handle mechanism
- Main connecting rod
- Mainframe
- Leg bracket
- holes right leg frame J4. holes leg frame K2. holes left leg frame
- Left stabilization bar
- Right stabilization bar
- Footbrake assembly
- Left rear wheel holder
- Right rear wheel holder
- Supporting cable
- Front-wheel fork assembly
- Sub-connecting rods
- Rear-wheel assembly
- Lower bag holder bracket assembly
- Front-wheel lock mechanism
- Front-wheel assembly
- Umbrella holder base
- Holding slot for folded cart frame
- Umbrella holder
MAINTENANCE
To clean the cart, wipe with a soft, dry cloth. Car polish may be used to
maintain finish. Lubricate moving parts every 6 months.
Warning:
For your own safety, please read and understand these warnings and keep this
user guide for future reference. Always make sure the cart is fully extended
and locked before use. Always make sure the cart is folded and locked properly
before lifting or transporting. Do not run while using this product. Do not
use accessories other than those designed for use with this cart. Keep all
packing materials away from children and recycle where possible or where
required by law.
- Lift the upper bag bracket as shown in Fig. 1.
- Simply pull the handle and upper bag bracket as shown in Fig. 2 to extend the cart. (Shake the cart slightly to release the mainframe from the holding slot if necessary.)
- Press the button on the leg frame and insert the wheels as shown in Fig. 3 to install the rear wheels.
- Press the button on the front wheel axel and insert the wheels as shown in Fig. 4 to install the front wheels.
Folding the cart
- Turning the knob as shown in Fig. 5 to release and tighten the handle.
- Press the folding button and push the handle downward as shown in Fig. 6 and Fig.7 to fold the cart till the main frame is click into the holding slot as in FIG. 8.
- Push the upper bag bracket downward as shown in Fig. 9.
- Fig. 10 shows the cart is folded.
Use the brake
- push on the brake pedal to stop the rear wheel and pull off to release as in Fig.11
**Umbrella holder
**
- To put in use： Simply attach the umbrella holder onto the cart as in Fig. 12
- To store: Attach the umbrella holder to the storage rack on the right leg frame as in Fig. 13
Front wheel alignment
- If the cart veers to the left, please use the hex wrench to turn screw A counterclockwise and Screw B clockwise to adjust the alignment. If the cart veers to the right, please use the hex wrench to turn screw A clockwise and screw B counterclockwise to adjust the alignment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>