Guangzhou Magic Clip Technology Q3 Car Wireless Charger Instruction Manual

Guangzhou Magic Clip Technology Q3 Car Wireless Charger Instruction Manual

1.Car Wireless Charger Manual

Product Name: Car stand wireless charger (Intelligent sensing)
Power: l5W, 10W, 7.5W , 5W
Effective transmission distance: 1-Scm
Size: Middle disk diameter:
12.3cmx 7.3cmx2.lcm
Charging interface: USB
Packing list:
Car bracket x 1, Manual Xl,
Data lineal, Car outlet base(clip)xl
Magnetic head x l (iPhone, type-C, Android)

2.Functional components

3. Specifications

1. Model: Q3
2. Color: Shade/ Blue/ Red/Gold/ Silver
3. Weight: product net weight about 128g
4. Material: PC+ ABS Vacuum Plating
5. Input voltage/ current: SV/2A, 9V/1.67A
6. Input voltage of magnetic head: DC 5V/2A
7.  Output power: l SW,l0W, 7.SW, SW automatic identification
8.  Charging power: 110K-20SK Hz
9. Charging distance: 0-Smm
10. Support Specifications: Qualified with QI Wireless Protocol Charging
11.  Support QC wireless fast charging equipment such as iphone8, iPhone x, iPhone plus. iphone12 Samsung S6, sedge, s7, Sedge, s8, s8+,s9+
12. Devices that do not support wireless charging need to purchase QI-compliant wireless receivers before they can be used

4. Instructions For Use

1. Connect the vehicle’s wireless charging device to the appropriate data cable when using it.
2. Connect the USB port of the data cable to the charging interface on theca(eg, cigarettelike hterswitchingcharge1and USB charging proton the car
3. The device clap clips the air outlet and can also be placed
4. After, the device is powered on 5V-9V DC power supply, it will automatically check the tension and the blue indicator light will be on. When the object lactose to the device 5cm-20cm, the automatic induction will open the and put the phone eonothem phone. the device will automatically clamp the phone. At this point, wireless charging will automatically cha1gethe phone,cha1gingg1een light (mob lie phone wth wireless charging function) when you ,emote the phone you need to touch the back of the shell the top of the sensing point, when the hand touches the sensing point position, the device automatically open double Arm, remove the phone
5. Thisdevicehuove1-voltage protection, over-temper true protect ion, magnetic field protect ion, short-circuit protection if thedeviceisabno1mal,itwillautomatic11llystop working

5. Precautions

1. Do not over-squeeze or hit the device
2. Do not use the wireless charger under severe high temperature, humidity or corrosive environment to avoid damaging the device’s circuit
3. USB power supply needs to be connected to qc3.0 vehicle charging head .can be used normally ( Easy to exit when connected to the use port of the car Problems such as slow charging)

Thank You For Using This Product

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. FCC ID: 2A6FI-Q3

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>