Guangzhou Magic Clip Technology M3 Car Wireless Charger Instruction Manual
- June 5, 2024
- Guangzhou Magic Clip Technology
Table of Contents
Guangzhou Magic Clip Technology M3 Car Wireless Charger
Instruction Manual
Functional description
- In the case of wiring, the bracket is wirelessly charged Normal use, the atmosphere light is on, after the touch area Normal use with the front infrared sensor.
- Without wiring, there is no wireless charge Electrical function, the front infrared sensor stops working, the gas Atmosphere lamp is not bright, the bracket can open normally under close use.
Car Wireless Charger Manual
Product Name: Car stand wireless charger Onlelligent sensing)
Power: 15W, 10W, 7.5W , SW
Effective transmission distance: 1-8cm
Size: Middle disk diameter: 12.3cm x 7.3cm x 2.1cm
Charging interface: USB Packing list: Car bracket x 1,
Manual Xl, Data linex 1,Car outlet base(clip)xl
Magnetic head × l ( !phone, type-C, Android )
Functional components
Specifications
- Model: M3
- Color: Black/silver/red/pink
- Weight: product’s net weight is about 128g
- Material: PC. ABS The plastic material
- Input voltage/current: 5V/2A, 9V/1.67A
- Input voltage of magnetic head: DC 5V/2A
- Output power: 15W,10W, 7.5W, SW automatic identification
- Charging power: 110K-205K Hz
- Charging distance: 0-8mm
- Support Specifications: Qualified with QI Wireless Protocol Charging
- Support QC wireless fast charging equipment such as phone8, phone x, phones plus, iphonel2 Samsung 56. sedge, s7, Sedge, s8, s8+,s9+
- Devices that do not support wireless charging need to purchase QI-compliant wireless receivers before they can be used
Instructions For Use
- Connect the vehicle’s wireless charging device to the appropriate data cable when using it
- Connect the US8 port of the data cable to the charging interface on the canes cigarette tighter stitching charger and USEI charging port on the car
- The device dip clips the air outlet and can also be placed elsewhere
- After the device is powered on SV r 9V DC point supply, it will automatically dint the tension and the red indicator light will be on When the object is close to the device Scm•20cm. the automatic induction will open the arms and put the phone into the phone. the device will automatically clamp the phone At that point. wire)ess charging will automatically charge the phone. charging blue light (mobile phone with ventless charging function) when you remove the phone you need to touch the back of the shell at the top of the sensing point when the hand touches the sensing point position. the deme automatics/1y open double Arm, remove the phone S. This device has over-voltage protection. ovet tem peratute pirOtrKliOn. magnetic had protection, short circuit protection if the device is abnormal, it will automatically working
Precautions
- Do not over squeeze or hit the device
- Do not use the wireless charger under severe high temperature, humidity, or corrosive environment to avoid damaging the device’s circuit
- The USB power supply needs to be connected to a qc3.0 vehicle charging head fan to be used normally ( Easy to exit when connected to the USB port of the car Problems such as slow charging)
Thank You For Using This Product
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is Subject To
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not explicitly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>