COSTWAY GT3381 300 ft Garden Yard Water Planting Hose Reel Cart User Manual
- June 5, 2024
- COSTWAY
Table of Contents
COSTWAY GT3381 300 ft Garden Yard Water Planting Hose Reel Cart User Manual
PARTS LIST
| A | Frame | 1 |
|---|---|---|
| B | Axles | 2 |
| C | Wheels | 4 |
| D | Hose Reel | 1 |
| E | Crank Handle | 1 |
| F | Handle | 1 |
| G | Leader Hose | 1 |
| H | Accessories Basket | 1 |
HARDWARE LIST
PART #| DESCRIPTION
Carriage Bolt, 6 x 33mm| QUANTITY
---|---|---
I| 2
1| Carriage Bolt, 6 x 39mm| 2
K| Bolt, 6 x 30 mm| 2
L| Bolt, 8 x 45mm| 2
M| Hex Nut, 8mm| 2
N| Flat Washer, 8mm| 4
0| Lock Nut, 12mm| 4
P| Flat Washer, 12mm| 4
Q| Lock Nut, 6mm| 5
R| Flat washer, 6mm| 3
S| Acorn Nut, 6mm| 1
T| Rubber Washer (Includes 1-Spare Rubber Washer| 2
Carefully remove the contents from the package. If any parts are missing do
not attempt to use the product until they have been obtain and correctly
installed.
ASSEMBLY INSTRUCTION
PLEASE READ ALL INSTRUCTION AND IDENTIFY ALL PARTS BEFORE STARTING ASSEMBLY
-
(SEE FIGURE 1) Remove and retain lock nut (0) and flat washer (P) from axle (B). Stand frame assembly (A) upright. Slide each axle (B)
-
(SEE FIGURE 2) Slide wheels (C) onto ends of each axles (B), with the wheel valve stems facing outward. Fasten each wheel to axle using flat washers (P) and lock nuts (0). Do not over tighten.
WARNING: PLEASE USE A MANUAL FOOT OR HAND PUMP TO INFLATE TIRE. OVER INFLATION MAY RESULT IN SERIOUS INJURY. MAX INFLATION: 30PSI
-
(SEE FIGURE 3) Insert the end of crank handle (E) through crank hub of frame (A).
-
(SEE FIGURE 4 ) Place hose reel (D) into frame assembly (A). Insert end of crank stem from hose reel (D) onto crank handle (E) Align crank handle (E) mounting holes with crank stem mounting holes.
-
(SEE FIGURE 5) Insert bolt (K) through inside hole of crank stem and crank handle hole, loosley fasten with lock nut (Q). Insert bolt (K) through outside hole of crank stem and crank handle hole and fasten with acorn nut (S). Tighten all fasteners securely.
-
(SEE FIGURE 6) Attach hose coupling end of hose reel (D) to frame (A), using U-Bracket. Fasten U-bracket to frame with carriage bolts (I) and lock nuts (Q). Tighten securely.
-
(SEE FIGURE 7) Place handle (F) onto vertical posts of frame (A). Align mounting holes. Slide bolt (J) through mounting holes and place flat washer (R) onto bolt (J). Fasten handle (F) using lock nut (0).
-
, (SEE FIGURE 8) Attach basket (H) to handle (F). Place flat washer (N) onto bolt (L) and slide both bolts through mounting holes of handle (F). Place basket (H) mounting tabs onto bolts (L) then place flat washer (N) onto both bolts. Fasten basket using hex nuts (M).
-
(SEE FIGURE 9) Place rubber washer (T) into female end of water coupling on hose reel (D) drum. Attach one end of leader hose (G) to water coupling on hose reel (D) drum. Attach the other end of leader hose (G) to the water supply spigot. Attach garden hose to threaded garden hose connector and wind garden hose around hose reel (D). NOTE: The hose reel will hold up to 350′ of 5/8′ garden hose. (Garden Hose Not Included).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>