VSC 2004-2021 STI Pitch Stop Mount Installation Guide
- June 5, 2024
- VSC
Table of Contents
Installation Manual
Product
Pitch Stop Mount
Fitment
2004 – 2021 STI
2002-2021 WRX
BEFORE YOU START
Suggested Tools
○ Factory Service Manual
○ 3/8” Drive Ratchet Handle
○ 3“and 6” Extensions
○ 12mm Socket
○ 14mm Socket
○ 14mm Wrench
○ Flat Head Screwdriver
○ 3/8” Torque Wrench
What’s Included
● 1x Pitch Stop Mount
CAUTION: NOTES BEFORE STARTING
This document uses a 2020 STI for the installation process.
Your experience may differ slightly depending on the year and model.
Make sure you have all the necessary tools before beginning installation.
Please reference your Factory Service Manual for specific part removal
instructions on your specific vehicle.
Factory Service Manuals can be purchased at: https://techinfo.subaru.com/
Disassembly
-
FA Only
– Remove the engine cover -
Uninstall top-mounted intercooler
– Reference service manual procedure -
Remove OEM pitch stop by removing 14mm nut and bolt securing OEM pitch stop to transmission and 14mm bolt securing the pitch stop to the firewall.
Reassembly
-
Install VSC Pitch Stop Mount and secure it to the following torque specifications
-
Rear 14mm bolt 43 ft-lbs
-
Front 14mm bolt and 14mm nut 37 ft-lbs
-
Check for proper clearance under the AC line on the firewall, and the wiring harness is behind the hose by the transmission mounting location
-
Reinstall top-mounted intercooler
– Reference service manual for torque specifications -
FA Only
– Reinstall the engine cover
Finished
If you have questions or need help with your installation or parts questions,
please reach out to us:
Email: support@vtcar.com
Phone: 802.655.3533
WARNING AND SAFETY RULES
Prior to the installation and/or use of any of the products contained herein, whether purchased from
or provided by Lance Smith Inc., d/b/a Vermont SportsCar (“VSC”), please read and understand both the installation instructions and these Warning and Safety Rules.
Failure to read, and strictly adhere to both the installation instructions and this Warning and Safety Rules may result in damage to personal property, serious personal injury, and/or death.
Keep all products out of the reach of children, and if children are around the
products. always have an adult present
Follow all instructions regarding the installation and use of all products.
Do not disassemble. modify. or attempt to repair any products for any reason.
If damaged or in need of service. please contact VSC at the phone number or
email address below
Do not use products in any manner which has not been approved by VSC. or in
connection with any third-party products, unless each has been approved by VSC
prior to such use.
Do not install or use products on vehicles that have not been approved by VSC,
as stated at www.vtcar.com (the ‘Website.
Prior to installation, always store products in a dry and clean location
Do not strike, hit. crush. shock drop. pierce or otherwise physically abuse
products. Make sure products are located in a place in which they will not be
tripped over. damaged. cut or scratched. Do not install or use any product if
it appears to be damaged or defective, instead, call or email VSC at the phone
number or email address below.
Immediately discontinue the use of the products in the event they become
damaged. deformed, destroyed, or altered in any way due to force or contact.
In the event you become injured during the installation or use of products
seek immediate medical attention.
If you are for any reason unable or unwilling to follow these instructions or
to comply with the terms above as applicable, please contact VSC at
(802)891-6815 or at store@vtcar.com
Your installation or use of the products will constitute your acknowledgment
that you have read the above. Keep these Warning and Safety Rules for your
records so that you may return to them as needed.
The Undisputed Destination for Fast.
vtcar.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>