Xiaomi BHR4457GL Mi 360 Degree 2K Home Security Camera User Manual
- June 5, 2024
- Xiaomi
Table of Contents
Xiaomi BHR4457GL Mi 360 Degree 2K Home Security Camera
Product Overview
Package Contents: Mi 360° Home Security Camera 2K, charging cable, wall mounting kit, user manual, warranty notice
Installation
You can place the Mi 360° Home Security Camera 2K on horizontal surfaces, such as desks, dining tables, and coffee tables. You can also mount it on a wall.
Mounting the camera on a wall:
- First use a pencil to mark the positions for the base mounting holes on the wall, then drill two holes at the marked positions. The diameter of each hole is approximately 6 mm, and the depth is approximately 30 mm.
- Insert a plastic wall plug into each drilled hole.
- Place the side of the base with arrows facing forward, and then align the holes. Insert the screws and then tighten them into the wall plugs with a Phillips head screwdriver.
- Align the grooves on the bottom of the camera with the raised part on the base, and then turn it clockwise until it locks into place.
Notes:
The wall must be able to support at least three times the total weight of the
camera.
Warning
To prevent possible injury, the camera must be securely fixed to the ceiling or
wall according to the installation instructions.
How to Use
-
Installing a microSD card
Make sure the camera is turned off. Push the lens upward to reveal the microSD card slot. Insert the microSD card into the card slot with its contact points facing downward.
Note: Disconnect the camera from the power before installing or removing a microSD card. Please use a genuine MicroSD card (up to 32 GB) manufactured by a qualified supplier. It is recommended to use a card with a reading/writing speed of no less than U1/Class 10. -
Turning on the camera
Plug the charging cable into the Micro-USB port on the back, the camera automatically turns on, and the indicator quickly blinks orange.
Note: When the camera is working, do not turn the lens of the camera nor force it to rotate. If the positioning of the lens is inaccurate, please calibrate it in the Mi Home/Xiaomi Home app. -
Indicator
- Blue: Connected successfully/Working properly
- Blinking blue: Network error
- Quickly blinking orange: To be connected
- Slowly blinking orange: Updating
Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app. Control your device with Mi
Home/Xiaomi Home app. To use this product, it is a must to download and
install the Mi Home/Xiaomi Home app. Scan the QR code to download and install
the app. You will be directed to the connection setup page if the app is
installed already. Or\ search “Mi Home/Xiaomi Home” in the app store to
download and install it. Make sure your phone has connected to the 2.4 GHz Wi-
Fi. Open Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow
prompts to add your device. The app is referred to as Xiaomi Home app in
Europe (except for Russia). The name of the app displayed on your device
should be taken as the default.
Note: The version of the app might have been updated, please follow the
instructions based on the current app version. Make sure the camera turns on
and the network connection is stable during connecting. The indicator is
quickly blinking orange when waiting for a connection, and turns into blue
once the camera is successfully connected.
Restoring factory settings
If the network connection or the Mi account that the camera is paired with has
been changed, you need to restore the factory settings. Press and hold the
reset button for about three seconds. Once the indicator starts quickly
blinking orange, the factory settings have been restored successfully. Then
you can reconnect the camera with the app. Note: Restoring factory settings
will not delete the content on the microSD card.
Real-time Surveillance
In the app, you can view the real-time surveillance, adjust the sharpness of
the image, adjust the horizontal and vertical angles, capture and record, and
make calls.
Infrared Night Vision
As the ambient light dims, the camera can automatically switch to night vision
mode. With the built-in infrared lights, it can clearly capture video in the
dark.
Playback
- The playback feature of the camera is only available when a compatible microSD card is installed.
- Once a microSD card is installed and the camera is plugged in, it will automatically start recording video. Tap the playback button in the app, then drag the timeline to select the time period you want to playback. The maximum supported playback speed is 16x.
Home Surveillance Assistant
- When the home surveillance assistant is enabled, the camera will record videos if it detects human movement and changes in real-time within its surveilled area. Then you will get the app push notification.
- You can enable or disable the home surveillance assistant in the Mi Home/Xiaomi Home app.
- You can set 24-hour, daytime, nighttime, custom period surveillance, alert sensitivity and alert time intervals, etc.
Video Sharing
In the app, you can select the device sharing option in the settings menu to share the camera with others. Users you share the camera with the need to download the app and sign in with their Mi account.
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual products and functions may vary due to product enhancements.
Precautions
- The operating temperature range for this camera is between -10°C and 40°C. Do not use the camera in environments with temperatures above or below the specified range.
- The camera is a precision electronic product. In order to ensure its normal operation, do not install the camera in environments with high humidity levels nor allow water to get into it.
- To improve the camera’s performance, do not place its lens facing or next to a reflective surface, such as glass windows or white walls, as this will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or cause the camera to produce white images.
- Make sure the camera is installed in an area with a strong Wi-Fi signal. Do not place the camera near the objects that may affect its Wi-Fi signal, such as metal objects, microwave ovens.
- Under normal use of conditions, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
EU Declaration of Conformity
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type Mi 360° Home Security Camera 2K is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
UK Declaration of Conformity
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type Mi 360° Home Security Camera 2K is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://www.mi.com/uk/service/support/declaration.html
Specifications
Name: Mi 360° Home Security Camera 2K
- Model: MJSXJ09CM Net Weight: 269 g
- Item Dimensions: 115 × 78 × 78 mm Input: 5 V 2 A
- Viewing Angle: 110° Resolution: 2304 × 1296
- Aperture: F1.4 Video Codec: H.265
- Operating Temperature: -10°C to 40°C
- Compatible with: Android 4.4 & iOS 9.0 or above
- Storage: MicroSD card (up to 32 GB)
- Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
- Wi-Fi Operation Frequency: 2412–2472 MHz
- Wi-Fi Maximum Output Power: <20 dBm
Manufactured by: Shanghai Imilab Technology Co., Ltd. (a Mi Ecosystem company) Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai, China For further information, please go to www.mi.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>