highmore HM-GD008-001 Aggro Gaming Desk 40 Inch User Manual

: June 5, 2024
: highmore

Table of Contents

Safety and Care Advice
Main Components
Fixings, Fittings, And Tools
Assembly Steps
After Sales Support / Product Returns
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Aggro Gaming Desk 40 Inch
User Manual

Product Ref-HM-GD008-001
Imported By: Forward Industries, 33401. U.S.A

Safety and Care Advice

The maximum weight that can be placed on this product is 176.4lbs.
This product must not be used as a seat.
Check carefully to ensure correct and complete assembly before using.
Don’t allow children to play near the chair as their behavior is unpredictable. The manufacturer or importer is not responsible for loss, injury, or damage due to improper actions or use.
Do not use corrosive or abrasive materials near the product. Please ensure that the cleaner used will not pollute the environment.
Cleaning should not be attempted by children without supervision.
Please make sure there are no hazard sources in your operating environment. e.g., do not leave tools around. Always be careful to dispose of the packaging materials in order to avoid any possible danger, e.g. plastic bags may lead to choking hazards to children.
We recommend you keep the original packaging of the item in case of the need for return or future transportation.
Do not use outdoors. SAVE THESE INSTRUCTIONS. For Household use only.

LED light:
Power supply voltage: DC 5V

Main Components

Please check you have all the parts listed below

Fixings, Fittings, And Tools

Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases, more fittings may be supplied than are required.

If you have questions regarding the operation of your purchase, or in the unlikely event you need to return the unit because it is faulty or is no longer wanted, please contact our product returns department at customerservice@forwardindustries.com, or 561-465-0030, Option 0.
Address: Forward Industries, 105 South Narcissus Avenue Suite 412, West Palm Beach, FL 33401

Assembly Steps

STEP 1
Assemble supports 2 in between legs 1 using screws B.

STEP 2
Assemble rear braces 3 and 4 in the positions shown at the back of the desk.
Secure using fixings B and C.

STEP 3
With help, carefully place the desktop 5 upside down onto a clean, flat, protected surface.
With help, locate leg frame into position and secure using screws E.

STEP 4
Assemble the two parts of the cup holder 6 together as shown.
Assemble cup holder 6 and headphone hook 7 to the underside of the desktop 5 using screws E.
Screw height-adjustable feet D into the underside of the legs 1.

STEP 5
Assemble cable clips 12 and 13 to the underside of the desktop 5 using screws E.
Note: Cable clips are located at the back.

STEP 6
Assemble cable management brackets 9 and 10 to the back of a desktop 5 using screws.

STEP 7
Assemble the cable management box 8 in between cable management brackets 9 and 10 using screws E.

STEP 8
With help, carefully turn the desk over into the standing position.
Warning! The desk is heavy. Lift with care.
Clip leg covers to legs as shown.

STEP 9
Assemble LED side extensions 14 and 15 at each side of the desktop using screws E.
Connect cable J in between LED side extensions as shown.
Use a cable H tie to support the cable J.
Stick decals 17 and 18 to legs as shown.
Place Mouse Pad 16 into position.

STEP 10
Locate Phone Holders F and Pen holders G as required.

After Sales Support / Product Returns

If you have questions regarding the operation of your purchase, or in the unlikely event you need to return the unit because it is faulty or is no longer wanted, please contact our product returns department at customerservice@forwardindustries.com, or 561-465-0030, Option 0.
Address: Forward Industries, 105 South Narcissus Avenue Suite 412, West Palm Beach, FL 33401