highmore Aggro 55 Inch Gaming Desk User Manual

Aggro 55 Inch Gaming Desk User Manual Product Ref-HM-GD009-001
Imported By: Forward Industries, 33401. U.S.A

Safety and Care Advice

1. The maximum weight that can be placed on this product is I 76.4Ibs.
2. This product must not be used as a seat.
3. Check carefully to ensure correct and complete assembly before using.
4. Don’t allow children to play near the chair as their behaviour is unpredictable. The manufacturer or importer is not responsible for loss, injury, or damage due to improper actions or use.
5. Do not use corrosive or abrasive materials near the product. Please ensure that the cleaner used will not pollute the environment.
6. Cleaning should not be attempted by children without supervision.
7. Please make sure there are no hazard sources in your operating environment. e.g., do not leave tools around. Always be careful to dispose of the packaging materials in order to avoid any possible danger. e.g. plastic bags may lead to choking hazard to children.
8. We recommend you keep the original packaging of the item in case of the need for return or future transportation.
9. Do not use outdoors. SAVE THESE INSTRUCTIONS. For Household use only.

Main Components

Please check you have all the parts listed below

1. Support A Qty 2 (27.16×1.06×1.1″)
2. Support B Qty 2 (27.16×1.06×1.1″)
3. Table leg Qty 2 (20.86×0.98×28.11″)
4. Rear brace Qty 1 Pair (7.87×1.97″)
5. Table top connecting plate Qty 2 (3.15×1.18″)
6. Table top (Left) Qty 1 (27.56×23.62×0.59”)
7. Table top (Right) Qty 1 (27.56×23.62×0.59”)
8. Cable management Qty1 (16.54×5.51×2.76″)
9. Leg cover Qty 2 (5.91×3.94×1.57″)
10. Cup holder Qty 1 (7.09×2.76″)
11. Headphone hook Qty 1 (5.12×1.97″)
12. Cable clip (Right) Qty 1 (2.36×0.71″)
13. Cable clip (Left) Qty 1 (2.36×0.71″)
14. Cable management bracket (Left) Qty1 (4.72×4.33×0.39″)
15. Cable management bracket (Right) Qty1 (4.72×4.33×0.39″)
16. LED side Extension (Left) Qty 1 (21.26×4.72×0.98″)
17. LED side Extension (Right) Qty 1 (21.26×4.72×0.98″)
18. Mouse pad Qty 1 (27.55×23.62″)
19. Decal (Left) Qty 1 (9.84×1.77″)
20. Decal (Right) Qty 1 (9.84×1.77″)

Fixings, Fittings And Tools

Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Assembly Steps

STEP 1
Assemble supports- and secure using fixings and C.

STEP 2
Assemble suppprisH  [2j in between legs U using screw B .

Screws need to be checked and tightened again after assembly is completed.

STEP 3
Assemble rear braces in the positions shown,at the back of the desk. 4 Secure using fixings and C .

STEP 4
With help, carefully place desk top and upside down onto a clean, flat, protected surface. 6 And 7 Use table top connecting plates to secure table tops and together. Use srews to secure. 5 and 6 and 7 E With help, locate leg frame into position and secure using screws . E

STEP 5
Assemble the two parts of cup holder together as shown. 10 Assemble cup holder and headphone hook to the underside of desk top and using screws . and 10 and 11 to 6 top7 E Screw height adjustable feet into the underside of D  legs 1 .

STEP 6
Assemble cable dips ig and to the underside of desk and 51 using screws top 0 Note: Cable clips are located at the back.

STEP 7
Assemble cable management brackets and ag to the back of desk top 6 and 7 using screws Er .

STEP 8
Assemble cable management box 8 in between cable management bracke4sr and 2 using screws

STEP 9
With heip. carefully turn the desk over into the standing position.
Warning! The desk is heavy. Lift with care.
Clip leg covers shown.11 legs as

STEP 10
Assemble LED side extensions 16 and 17 ai at each side of the desk top using screws E . Connect cableOin between LED side extensions as show.
Use cable bee) J to support cable E.
Stick decals19 and 20 to legs as shown
Place Mouse Pad 18 into position.

STEP 11
Locate Phone Holders F and Pen Holder G as required.

After Sales Support / Product Returns

If you have questions regarding the operation of you purchase, or in the unlikely event you need to return the unit because it is faulty or is no longer wanted, please contact our product returns department at customerservice@forwardindustries.com , or 561-465-0030, Option 0.

Address: Forward Industries, 105 Sourth Narcissus Avenue Suite 412,
West Palm Beach, FL 33401
Issue 1 – 30/09/21

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>