Highmore HM-WB005-001 Rocko Workbench With Pegboard User Manual

Highmore HM-WB005-001 Rocko Workbench With Pegboard

Safety and Care Advice

1. The maximum weight that can be placed on this product is 2976 lbs.
2. This product must not be used as a seat.
3. Check carefully to ensure correct and complete assembly before using.
4. Don’t allow children to play near the table as their behaviour is unpredictable. The manufacturer is not responsible for loss, injury, or damage due to improper actions or use.
5. Do not use corrosive or abrasive materials near the equipment. Please ensure that the cleaner used will not pollute the environment.
6. Cleaning should not be attempted by children without supervision.
7. Please make sure there are no hazard sources in your operating environment. e.g, do not leave tool: around. Always be careful to dispose of the packaging materials in order to avoid any possible danger, e.g. plastic bags may lead to choking hazard to children.
8. We recommend you keep the original packaging of the item in case of the need for return or future transportation.
9. When installing, be sure to wear safe and compatible tools. It is recommended that two people complete the installation together.
10. Please check the usage status of the tool table template from time to time to avoid cracks on the wooden board, resulting in damage to the product and unnecessary losses.

Note: This type of product is recommended for indoor use. If it is used outdoors, weather may cause accelerated aging of the wood board, causing damage to the product or personal injury.

Main Components

Please check you have all the parts listed below:

Fixings, Fittings And Tools (A)

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

If you have questions regarding the operation of your purchase, or in the unlikely event you need to return the unit because it is faulty or is no longer wanted, please contact our product returns department at [email protected], or 561-465-0030, Option 0.
Address: Forward Industries, 105 South Narcissus Avenue Suite 412, West Palm Beach, FL 33401

Fixings, Fittings And Tools (B)
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required .

Assembly Steps

1. Assemble metal brackets 5 to the underside of table top 1 using fixings B and H.

2. Assemble leg frames 2 in between metal brackets 5 using fixings B and H.
   Important Ensure the threaded holes in legs 2 are located at the back of the table top 1.

3. Assemble rear stretcher 3 to the back of leg frames 2 using fixings B and H.

4. Screw height-adjustable feet 4 into the ends of leg frames 2. With help turn the table over and adjust the feet to achieve a stable base.
   Warning the desk is heavy, lift with care.

5. Assemble pegboard supports 6 and 7 to the underside of table top 1 using fixings A and G.

6. With help, locate pegboards 8 in between supports 6 and 7. Secure fixings A and G.

7. Assemble Shelf.

   • a. Assemble shelf back panel 10 and shelf 11 together using fixings C.
   • b. Assemble shelf side panels 12 and 13 using fixings C.

8. Locate shelf into position between pegboard supports 6 and 7. Secure using fixings A and G.

   • a. Fixings are located through shelf side panels 12 and 13.
   • b. Also through shelf 11 into the top peg board 8.

9. STEP 9:

   • a. Attach magnets to LED light 9. Locate the light to the underside of shelf 11.
   • b. Use self-adhesive cable clips  F for cable management.
   • c. Locate tool hooks into the peg boards as required.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>