KOIOS B-D02L Air Purifier User Manual

KOIOS B-D02L Air Purifier

WARRANTY

• KOIOS-branded products are covered by the KOIOS 12-month warranty from the original date of purchase. If you want to extend your warranty for one more year, please do not hesitate to contact us.
• Become a KOIOS member and get access to exclusive benefits, such as updates about the latest KOIOS products.

IMPORTANT  SAFEGUARD

Please follow the further recommendations to avoid personal injury or product damage.
WARNING

• Please read the important safeguards carefully before using this appliance
• Please supervise your children and avoid them from touching or using appliance.
• Do not handle the plug with wet hands. It may cause electrical shock.
• Do not disassemble, repair, or reconstruct the appliance. It may cause an electric shock, fire hazard, or getting an injury. Contact the authorized retailer for item repairing.
• Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance. Other electric appliances used simultaneously may cause the socket to be hot or cause the fire.

TECHNICAL FEATURES

PURIFICATION TECHNOLOGIES
*Pre-filter, HEPA filter
Activated carbon filter removes formaldehyde, benzene, xylene, toluene, TVOC and other harmful gases effectively. Low resistance Hl3 HEPA filter traps 99.97 percent of tiny particles or droplets in the air that are two and one half microns or less in width.

FILTRATION PROCESS DIAGRAM

PRODUCT OVERVIEW

KOIOS AIR PURIFIER WITH Hl3 HEPA AIR FILTER DIAGRAM

CONTROL PANEL ORVERVIEW

SAFTY TIPS

Make sure the filter is installed properly before switching the appliance on. A large amount of dust may cause malfunctions. Do not use a power adapter that is not compatible with the product. Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance. Please check if the appliance is securely connected to the power socket before use.
In case of a power outage:

1.  Unplug the AC plug out of the power adapter.
2.  Unplug the DC plug out of the unit.

USE AND OPERATION

CiETTINCi STARTED
Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet closer than 30cm.
Make sure that foreign objects do not fall into the air purifier through the air outlet.
Do not use the appliance in wet areas or in surroundings that are high ambient temperature.

FILTER
The filter should be replaced every 3-6 months.
Fan speed indicator flashes when the filter replacement is needed.
After the filter has been replaced, press and hold the fan speed button for 3 seconds to reset the filter lifetime counter.

Removing the filter

1.  Switch the appliance off and unplug it.
2.  Invert the equipment.
3.  Rotate the base cover counter-clockwise to take out the filter.
4.  Remove the filter as soon as the base cover will be opened.

REPLACING THE FILTER

Installing the filter

1.  Please remove the new filter protective film before installation.
2.  Rotate the base cover clockwise properly until the filter is installed securely.

EXTERNAL POWER SOURCE
DC Adapter

USING THE APPLIANCE

POWER SETTINO

• Please insert the plug into the power socket firmly, the indicator light will lit for l second for self-checking. Air purifier enters standby mode by default.
• Turn the air purifier on by pressing the “ON/OFF” button. The filtration speed is adjusted to the lowest fan speed (“L” fan speed indicator lights up).
• Press the “ON/OFF” button again to switch the appliance off, the air purifier enters standby mode.

When the appliance is turned on, press and hold the “Power” button for 3 seconds to turn the internal light off on your air purifier. Proceed the same procedure to turn the internal light on. When the appliance is turned on, press and hold the “Fan” button for 3 seconds to turn the display backlight off. Press any key to turn the display backlight on.

SETTING FAN SPEED
Briefly press the “Fan Speed” button to set the required fan speed level. Press again to switch the fan speed level. Adjust the fan speed level according to the order depicted below.

SLEEP MODE
The air purifier filtration speed is adjusted to the lowest airflow speed. After the sleep mode was set, the light intensity of the appliance will be switched off in 10 seconds.
Note: Timer cannot be applied to sleep mode.

TIMER
Use the “Timer” button to set the appliance operating duration. Press the “Timer” button to pick the required duration of operating time (l, 2, 4, or 8 hours). Air purifier shuts off automatically at the end of the selected period.

CHILD LOCK
Press and hold the “Timer” button for 5 seconds to activate the child lock. The child lock symbol ” II) “lights on. When the child lock is on, none of buttons a re responsive.
Press and hold the “Timer” button for 3 seconds again to deactivate the child lock.

MEMORY FUNCTION
Your fan speed and backlight settings remain the same in case of a power outage. But the picked operating duration will be reset.

TROUBLESHOOTING

If the appliance works not properly please check the most common problems you could encounter at the table below.

If the problem cannot be solved according to the information above, please contact the authorized retailer for item repairing.

SPECIFICATION

• Model No: B-D02L
• Power supply: 24V/750mA
• Net Weight: 3.52 LB
• Noise level dB(A): s20dB(A)
• Power consumtion (W): 16W
• Dimensions (wxdxh): lBOx 180×292(mm)

Hl3 HEPA Filter

• Dimensions (wxdxh): 135•135•145 (mm)
• Lifespan: 3-6 months

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>