DAYTONA 350 LB Heavy Duty Creeper with Adjustable Headrest Owner’s Manual
- June 5, 2024
- DAYTONA
Table of Contents
DAYTONA 350 LB Heavy Duty Creeper with Adjustable Headrest
Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
WARNING
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
Specifications
Maximum Weight Capacity | 350 lb |
---|---|
Overall Dimensions | 39 – 5/8″ L x 17 – 1/2″ W x 4- 1/2″ H |
IMPORTANT SAFETY INFORMATION
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not use Creeper when you are tired or under the influence of alcohol or drugs.
- Do not work under a vehicle raised on a jack. Support vehicle on jack stands (not included). Block any tires that will remain on the ground.
- If the vehicle is on the ground, block the tires, set the parking brake, and put it in gear or park.
- This product is not a toy. Do not allow children to play with or near this item.
- Use as intended only. Do not stand on creeper.
- Store on edge, clear of walkways when not in use.
- Inspect before every use; do not use if parts are loose or damaged.
- Do not exceed maximum weight capacity. Be aware of dynamic loading! Suddenly dropping onto creeper may briefly create excess load causing product failure.
- Use on flat, level, hard surface only.
- Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
WARNING
TO PREVENT SERIOUS INJURY:
Do not work under a vehicle raised on a jack. Support vehicle on jack stands
(not included). Block any tires that will remain on the ground. If the vehicle
is on the ground, block the tires, set the parking brake, and put it in gear
or Park.
- Lay Headrest (1) flat by pulling it toward pad (2) until it locks on the third position. The headrest drops flat after pulling it towards the pad in the third position.
- To adjust the Headrest, pull up to lock on the first position. Continue to pull toward the pad to lock the headrest in second and third positions.
- Keep your head flat on the Headrest while sliding under the vehicle. Then, pull the Headrest and lock it at a comfortable angle.
- Pull headrest toward pad on the third position to lay flat and slide Creeper out under vehicle.
Maintenance
Procedures not specifically explained in this manual must be performed only by a qualified technician.
- Wipe down cushions with a damp cloth.
- Clean off any grease or debris which accumulates on casters.
- Check hardware and tighten if necessary.
Parts List and Diagram
Part | Description | Qty |
---|---|---|
1 | Headrest | 1 |
2 | Pad | 1 |
3 | Frame | 1 |
4 | Cap | 4 |
5 | Caster | 6 |
Part | Description | Qty |
---|---|---|
6 | Caster Nut | 6 |
7 | Spring Washer | 6 |
8 | Adjustable Connector- Right | 1 |
9 | Bolt M6x20 | 8 |
10 | Adjustable Connector- Left | 1 |
11 | Bolt M6x35 | 3 |
Record Serial Number Here:
Note: If the product has no serial number, record the month and year of purchase instead. Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175447982 when ordering parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE
IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATE THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF
HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear, and tear, or lack of maintenance. We shall in no
event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our
product. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take
advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of
the complaint must accompany the merchandise. If our inspection verifies the
defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide
you with a replacement. We will return repaired products at our expense, but
if we determine there is no defect, or that the defect resulted from causes
not within the scope of our warranty, then you must bear the cost of returning
the product. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Visit our website at:
http://www.harborfreight.com
Email our technical support at:
productsupport@harborfreight.com
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2021 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, the actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>