Bob AND Brad MINI.Q2-D Mini Massage Gun User Manual

Bob AND Brad MINI.Q2-D Mini Massage Gun

Warnings and Safety Cautions

It is important to know the following before use, otherwise it may cause damage or become dangerous!

•  For use only by healthy adults other than older adults;
•  Use the product only on the soft tissues of the body without causing pain or discomfort;
• Do not use on the head, or any hard or bony part of the body;
•  Either controlled downward pressure or the application of pressure may produce bruising. Check the massage area frequently and – stop using the product as soon as signs of pain or discomfort appear;
•  Use only on dry, clean skin surfaces on body parts, pressing and moving gently on the skin;
•  Keep your fingers, hair or other body parts away from the shaft and back of the vibrating head, as they may get caught;
•  Do not apply to bony areas where there is less muscle coverage, such as the shins, backs of the feet, back of the hands;
•  Do not use the product on or around sensitive areas such as eyes, teeth, breast implants, genital organs, artificial limbs, etc;
•  Do not place the product in any area where there is a risk of fracture;
•  If the pain is persistent, discontinue use immediately and consult a physician.
•  This product is not a medical device, it’s not
•  recommended for medical use, not intended for medical use in hospitals;
•  Please check the main unit and cable before using, if damaged, it must be replaced by the manufacturer or its appointed professional to avoid danger;

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following.
Two conditions:

1.  This device may not cause harmful interference.
2.  This device must accept any interference received, including interference that may cause undesired operation.

FCC Statement NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help with the supplied fastener. DO NOT hang the unit by the power cord.

Disclaimer

Please contact your physician before using the Bob and Brad QL/MINI.Q2-D massage gun if you have any physical health concerns or have any of the following conditions: Pregnancy, diabetes, epilepsy, migraines, herniated disks, spondylolisthesis, recent joint replacements or IUDs. Please also contact your physician before use if you have undergone recent surgery or have any metal pins or plates in your body.

Main Structure and The Fittings

1. Fork Head
2. Ball Head
3. Bullet Head
4. Air Cushion Head
5. Flat Head

Operation Steps

Removing And Replacing A Massage Head

1.  Before attaching the massage head, turn off the massage gun.
2. Grab the inserted head and firmly pull out to remove it.
3. Insert the stem of a new head into the unit, press firmly to secure.

Note
Fork-head need to be installed as shown in the attached picture, otherwise there is a risk of falling off!)

Turn the device ON/OFF And Changing Percussion Massage Frequency

1.  Turn the device ON/OFF In the shutdown state, press the ” ” button on the panel for 2 seconds to turn on
2. To changing percussion massage frequency when the device is on, press the button” “to turn on the first gear.lf you would like to advance to a higher setting, press the button ” “again. The active gear  will be indicated by the back light. To pause the massage unit the button ” ” for 2 seconds. Press for 2 seconds again to resume.

Noted:

•  After 10 minutes of operation, the device automatically changes to level 0 and stops output;
• The LED light indicates the corresponding strike frequency level, the lowest at level 1 and the highest at level 5;
• When the device is in standby (0 level), it will automatically shut down without any operation after 20 seconds.

Battery Display

When the device is running, the battery indicator is red, indicating that the power is less than 30%; when the indicator is red and blinking it’s indicating that the power is less than 20%, and should be charged soon.

Charging

1.  Before the first use, please fully charge the device. To charge fully, it takes 3 hours.
2. Connect the output end of the connection line to a DC charging port at the bottom of the device, and then connect the input end of the connection line to the mobile power source or mobile phone charger (5V/2A, if the charging current or voltage is less than 5 V/2 A, charging time will be longer. Any regular phone adapters will be able to charge the massage gun without a problem.
3.  When connecting the power cable the light will appear green and, it means the device is charging, when fully charged the green indicator will turn off.
4. The battery can be charged at any power level; when charging, please ensure that the device is off, when the device is running, charging will automatically be protected.

How to Fix Your Massage Gun if it Stops Working

1. Recharge fully using the USB-A to USB-C Cable for 3-4 hours. It will not take charge if you are using USB-C to USB-C cable.
2. The battery lights should be flickering when taking charge. Press and hold the power button for 3-5 seconds.

Technical Details

• QL/MINI.Q2-D Mini Massage Gun
• Speed: 1800-3000 r/min
• Rated Power: 25W
• Dimensions: 14.6×8.6×4.8cm / 5.7 “x3.3 “x1 .8 ” Battery:
• Rated Voltage: 11.1V
• Battery capacity: 2500mAh
• Charging time: 210 minutes

Guarantee
This product comes with a one-year warranty from the date of purchase. Warranty will be void due to any of the following: Damaged due to improper usage or storage. Damaged by attempting to repair or disassembling the device. Period of warranty exceeded.Utilize the Bob and Brad massage gun before, during, or after your workout for maximum benefits. This massage gun can help accelerate muscle tissue responsiveness by increasing hydration, range of motion and function to tight muscles.

CHEST

• PROTOCOL: Sweep from A to B on
• each sice for 1 minute
• DURATION: 2 minutes

ABS

• PROTOCOL: Sweep from A to B on
• each sice for 1 minute
• DURATION: 2 minutes

UPPER TRAPS

1 Minute

• PROTOCOL: Sweep from A to B on
• each side for 30 seconds
• DURATION: 1 minute

UPPER BACK

4 Minutes

ATTACHMENT: BALL HEAD

• STEP 1: Upper back
• PROTOCOL: Sweep from A to B on each side for 1 minute
• DURATION: 2 minutes
• STEP 2: Lower back
• PROTOCOL: Sweep from A to B on each side for 1 minute
• DURATION: 2 minutes

SHOULDERS
2 Minutes

• PROTOCOL: Sweep from A to B on
• each side for 1 minute
• DURATION: 2 minutes

BICEPS

• PROTOCOL: Sweep from A to B
• on each side for 1 minute
• DURATION: 2 minutes

TRICEPS

• PROTOCOL: Sweep from A to B on
• each side for 2 minutes
• DURATION: 4 minutes

FOREARM

• PROTOCOL: Sweep from A to B on
• each sice for 1 minute
• DURATION: 2 minutes

HANDS

• PROTOCOL: Sweep from A to B on
• each side for 30 seconds
• DURATION: 1 minutes

HIP FLEXORS

• PROTOCOL: Sweep from A to B on
• each sice for 1 minute
• DURATION: 2 minutes

SHINS

• PROTOCOL: Sweep from A to B on
• each sice for 30 seconds

GLUTES

• PROTOCOL: Sweep from A to B on
• each side for 2 minutes
• DURATION: 4 minutes

HAMSTRINGS

• PROTOCOL: Sweep from A to B on
• each sice for 1 minute
• DURATION: 2 minutes

CALVES

• PROTOCOL: Sweep from A to B on
• each sice for 1 minute
• DURATION: 2 minutes

FEET

• PROTOCOL: Sweep from A to B on
• each sice for 2 minutes
• DURATION: 4 minutes

A Dedicated Team Just For You

Every Bob and Brad product is backed by a 1-year warranty and an award-winning customer service team. If you are in any way dissatisfied with a product you ordered, we’ll exchange it, replace it or refund your money under the warranty. Simply email us the problem, and we’ll take care of it.

Troubleshoot

Help you solve any issues with your device.

Initiate Returns
Provide instructions for replacements, returns and refunds.

Product Knowledge
Answer questions about your device and best practices.

Place New Orders
Help with placing orders online and/or authorized resellers.

Get in Touch.

• Call: +1 612-567-3035 Mon-Fri 9:00AM-4:30PM (CST) Email: [email protected]
• FLIGE Products LLC
• 3001 Esperanza Crossing Austin,TX 78758

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>