Bob AND Brad D6 Pro-C Massage Gun User Manual
- June 11, 2024
- Bob AND Brad
Table of Contents
Bob AND Brad D6 Pro-C Massage Gun
Maintenance
The battery in this device is not designed to be removed or exchanged by the
user. If there is any problem with the power supply, please contact us
immediately.
DO NOT attempt to open or repair the device by taking it apart yourself.
Tampering with the device’s mechanics in any way will automatically void the
product’s warranty.
Warnings and Safety Precautions
Before connecting the device to the power supply, please ensure that the supply voltage stated on the rating plate is compatible with the unit.
-
Please charge the new batteries fully before the first use.
-
DO NOT submerge the device in water or any other liquid.
-
DO NOT use the device for more than 30 minutes at a time. Wait 5 minutes before using the device again, following a 30-minute session with the device.
-
DO NOT apply directly or around your head or genitals.
-
DO NOT use the device to supplement or replace any medical treatment. Please consult your physician before using the device if you are experienc-ing unexplained pain, receiving medical treatment, or using medical equipment.
It is important to know the following before use, otherwise it may cause damage or become dangerous! -
For use only by healthy adults.
-
Use the product only on the soft tissues of the body without causing pain or discomfort.
-
DO NOT use on the head, or any hard or bony part of your body.
-
Either controlled downward pressure or the application of pressure may produce bruising. Check the massage area frequently and stop using the product as soon as signs of pain or discomfort appear.
-
Use only on dry, clean skin surfaces, pressing and moving gently on
-
Keep your fingers, hair or other body parts away from the shaft and back of the vibrating head, as they may get caught.
-
DO NOT apply to bony areas where there is less muscle coverage, such as the shins, back of the feet, back of the hands.
-
DO NOT use the product on or around sensitive areas such as eyes, teeth, breast implants, genital organs, artificial limbs, etc.
-
DO NOT place the product in any area where there is a risk of fracture. If the pain is persistent, discontinue use immediately and consult a physician.
THIS PRODUCT IS NOT A MEDICAL PRODUCT.
FCC Statement
This device complies with Part-15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device under Part 15 of the FCC Rules. These limits are designed to
protect reasonably against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy if not
installed and used by the instructions. However, there is no guarantee that
interference will not occur in a particular installation. Suppose this
equipment does cause any harmful interference to radio or television
reception, which can be determined by turning the equipment off. In that case,
the user should try to correct the malfunction by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Plug the equipment into the outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help with the supplied fastener. DO NOT hang the unit by the power cord.
Disclaimer
Please contact your physician before using the Bob and Brad D6 Pro-C Massage
Gun if you have any physical health concerns or have any of the following
conditions:
Pregnancy, diabetes, epilepsy, migraines, herniated disks, spondylolisthesis, recent joint replacements, or IUDs. Please also contact your physician before use if you have undergone recent surgery or have any metal pins or plates in your body.
Contact Us
Web: www.bobandbrad.com
Email: support@bobandbrad.com
Tel:+1 (612)567-3035
M-F 9:00 AM-5:30 PM
Usage Environmental Conditions
- Temperature: 5°C~40°C
- Relative Humidity: S90%F
- Atmospheric Pressure: 70kPa~ 106kPa
Manufacturer
Shenzhen Laige Technology Co.Ltd.
Room 301, 3/F, Building 2, Yunli Intelligent Park,
No.3 Changfa Middle Road, Yangmei Community, Bantian Street,Longgang District,
Shenzhen, Guangdong, 518129, China
Main Structure and Fittings
- A. OLEO Screen
- B. Button Pad
- C. Interchangeable Head
- D. Rotating Arm
- E. Rotating Arm Button
- F. Ergonomic Multi-grip
- G. Charging Indicator
- H. Type-C Charging Port
Operation Steps
- Remove or replace a massage head: At first, please make sure the device is turned off. Then, grab the inserted head and firmly pull out to remove it. Finally, insert the stem of a new head into the unit, and press firmly to secure.
- Button Function Explanation
M1 Mode – Standard Manual Mode
- Power button:
- Long press – turn on/off the device
- Short press – Increase the speed.
- Mode button:
- Short press – decrease the speed
M2/M3/M4 Mode – Auto Mode
Step 1 – Turn on the device and Long-press to Enter the mode selection.
Step 2 – Short press the to toggle between mode 1/2/3/4
Step 3 – Short press the to confirm your mode.
OLEO Screen Explanation
Mode Explanation
Using Rotating Arm
The rotating arm orientation of this device adjusts to 6 positions, with a
total adjustment range of 0-90°. Press the arm rotating switch on the left
side of the device to adjust the arm.
About Charging
- The device must be charged using the power adapter that came with the product. Do not use an ordinary 5V power adapters to charge it. If the ” ” icon is on the screen, it indicates abnormal charging, please replace the power adapter.
- Please charge the device for about 2.5 hours before first use.
- Connect the output end of the charging cable to the TYPE-C charging port on the bottom of the product , and then connect the input end of the charging cable to the power adapter provided with the product.
- The icon “ ” on the screen and the icon is flashing and charging Indicator light is green, this means the device is charging.
- The icon “ ” on the screen and the charging Indicator light is off, this means the device is fully charged.
- The icon “ ” on the screen, this means the battery is low and the device needs to be charged.
- The icon” ,, on the screen, this means the battery is overheat protec tion and the device needs to leave for over 30 minutes before using again.
- The icon “ ” on the screen, this means you use the 5V power adapters to charge the device.
- The icon ” ” on the screen, this means you use the 9V power adapters to charge the device.
- The icon ” ” on the screen, this means you use the 12V power adapters to charge the device.
- It is not recommended to drain the battery before charging it.
- The device can be used for about 2.5 hours after fully charged, depending on the speed you choose and the pressure you put on it.
Technical Details
- Product Name: Massage Gun
- Product Model: D6 Pro-C
- Speed: 1500-2500 r/min
- Rated Power: 25W
- Dimensions: 10.5″x7.6″x3.1″
- Rated Voltage: 21.6V==
- Battery Capacity: 2500mAh
- Charging Time: 210 minutes
- Amplitude: 16mm
- Auto Shut-off Timer: 10 minutes
- Product Weight: 2.8Ibs
- Color: Black
- FCC ID: 2A55F-D6PRO
- Adapter can be used independently
- Power Adapter Input: 100-240V-50/60Hz 0.5A
- Power Adapter Output: 5V==3A/9V==2.22A/12V==1.67A
Guarantee
This product comes with a one-year warranty from the date of purchase.
Warranty will be voided due to any of the following:
- Damaged due to improper usage or storage.
- Damaged by attempting to repair or disassemble the device.
- Period of warranty exceeded.
Troubleshooting
If you encounter any other problems, contact: support@bobandbrad.com
Utilize the Bob and Brad massage gun before, during, or after your workout for maximum benefits. This massage gun can help accelerate muscle tissue responsiveness by increasing hydration, range of motion, and function to tight muscles.
CHEST
2 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 1 minute
- DURATION: 2 minutes
ABS
2 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 1 minute
- DURATION: 2 minutes
UPPER TRAPS
1 Minute
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 30 seconds
- DURATION: 1 minute
UPPER BACK
4 Minutes
ATTACHMENT: BALL HEAD
STEP 1: Upper back
PROTOCOL: Sweep from A to B on each side for 1 minute
DURATION: 2 minutes
STEP 2: Lower back
PROTOCOL: Sweep from A to B on each side for 1 minute
DURATION: 2 minutes
SHOULDERS
2 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 1 minute
- DURATION: 2 minutes
BICEPS
2 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 1 minute
- DURATION: 2 minutes
TRICEPS
4 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 2 minute
- DURATION: 4 minutes
FOREARM
2 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 1 minute
- DURATION: 2 minutes
HANDS
1 Minute
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 30 seconds
- DURATION: 1 minutes
HIP FLEXORS
2 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 1 minute
- DURATION: 2 minutes
SHINS
1 Minute
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 30 seconds
- DURATION: 1 minutes
GLUTES
4 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 2 minutes
- DURATION: 4 minutes
HAMSTRINGS
2 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 1 minute
- DURATION: 2 minutes
CALVES
2 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 1 minute
- DURATION: 2 minutes
FEET
4 Minutes
- ATTACHMENT: BALL HEAD
- PROTOCOL: Sweep from A to B on each side for 2 minutes
- DURATION: 4 minutes
A Dedicated Team Just For You
Every Bob and Brad product is backed by a 1-year warranty and an award-winning customer service team. If you are in any way dissatisfied with a product you ordered, we’ll exchange it, replace it or refund your money under the warranty. Simply email us the problem, and we’ll take care of it.
Troubleshoot
Help you solve any issues with your device.
Initiate Returns
Provide instructions for replacements, returns . and refunds.
Product Knowledge
Answer questions about your device and best practices.
Place New Orders
Help with placing orders online and/or ” authorized resellers.
Get in Touch.
Call: +1 612-567-3035 Mon-Fri
9:00AM-4:30PM (CST)
Email: support@bobandbrad.com
FLIGE Products LLC
3001 Esperanza Crossing Austin,TX 78758