BOSCH BHU3600 Kiox 300 Display Smart System Instruction Manual
- June 5, 2024
- Bosch
Table of Contents
Kiox 300
BHU3600
Original operating instructions
| 
---|---
Safety instructions
Read all the safety information and instructions. Failure to observe the safety information and follow instructions may result in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.
The term battery is used in these instructions to mean all original Bosch
eBike rechargeable battery packs.
-
Do not attempt to secure the display or operating unit while riding.
-
Do not allow yourself to be distracted by the onboard computer’s display. If you do not focus exclusively on the traffic, you risk being involved in an accident. If you want to make entries in your onboard computer other than switching the assistance level, stop and enter the appropriate data.
-
Set the display brightness so that you can adequately see important information such as speed and warning symbols. Incorrectly set display brightness may lead to dangerous situations.
-
Do not open the onboard computer. Opening the onboard computer may damage it beyond repair and void any warranty claims.
-
Do not use the onboard computer as a handle. Lifting
the eBike up by the on-board computer can cause irreparable damage to the on- board computer. -
Do not stand your bicycle upside down on its saddle and handlebars if the onboard computer or its holder protrudes from the handlebars. This may irreparably damage the onboard computer or the holder. Also remove the onboard computer before placing the bicycle on a wall mount to ensure that the onboard computer does not fall off or become damaged.
Privacy notice
If the on-board computer is sent to Bosch Service because it requires
servicing, the data stored on the onboard computer may be transmitted to
Bosch.
Product description and specifications
Intended use
The Kiox 300 on-board computer is designed to display cycling data. To access
the full functionality of the Kiox 300 onboard computer, you will need a
compatible smartphone installed with the eBike Flow app (available from the
Apple App Store or the Google Play Store).
Product features
The numbering of the components shown refers to the illustrations on the graphics pages at the beginning of the manual.
- Display
- Front cable outlet
- Rear cable outlet
- Removal blocker
- Snap-in hook
- Adapter tray
- Display contacts
- Holder contacts
- Display mount
- Display mount fastening screw
- Bridge for retaining strap
Technical data
| On-board computer | Kiox 300 | |
|---|---|---|
| Product code | BHU3600 | |
| Operating temperature A) | °C | −5 to +40 |
| Storage temperature | °C | +10 to +40 |
| Protection rating | IP54 | |
| Weight, approx. | g | 32 |
A) Temperatures outside of this range may cause faults in the display.
Assembly
Inserting and Removing the Display (see figure A)
To fit the display (1), attach the display (1) to the front edge of the
display mount (9) in the direction of travel, on the snap-in hook (5) ❶ and
press the rear side of the isplay (1)
on the display mount (9) ❷. To remove the display (1), pull the display (1)
towards you ❶ until you are able to lift off the display (1) ❷. A retaining
strap can be secured to the bridge (11).
Inserting the Removal Blocker (see figure B)
Insert the removal blocker (4) into the adapter tray (6) from below until you
hear the removal blocker (4) click into place.
From this point onwards, you can no longer lift off the display (1) from the
display fixture (9) without removing the display mount (9) from the adapter
tray (6) by loosening the
two fastening screws (10). Note: The removal blocker (4) is not an anti-
theft device.
Operation
The displays are operated and the indicators are controlled via a control
unit.
The meaning of the buttons on the operating unit for the display indicators
can be found in the following overview.
Depending on how long it is pressed for, the select button has two
functions.
| Scroll to the left
---|---
Scroll to the right
Scroll up
Scroll down
Change to the second page level (press briefly)
Open page-related options (e.g.
Open the settings menu (Press and hold > 1 s)
Start page
If you did not select another page before the last time you switched off, you
will be shown this page.
a Battery charge
b Assistance level
c Bicycle lights
i Unit of speed indicator
j Indicator name
k Your performance
l Speed
m Motor output
The a … c indicators form the status bar and are shown on every page.
You can use the button to change from this page to the status page or press
the button to access additional pages. Your statistical data, the battery
range and the average values are displayed on these pages.
From each of these pages, you can access the second level of data by pressing
the button.
If the user is on a different page to the start page when they switch off, the
most recently displayed page will appear again when the eBike is switched on.
Pressing and holding the select button enables you to reset the statistical
data for your journey or excursion (not on the < SETTINGS> page).
Status page
From the start page, you can access the status page by pressing the button.
a Battery charge
b Assistance level
c Bicycle lights
d Time
e Connection indicator
f Smartphone connection
g Settings Menu
You can access the settings menu from this page by pressing the button.
Note: The settings menu cannot be called up while riding.
The
–
You can find the following menu items here.
▪
The value for the range can be reset here.
▪
The settings for automatic reset can be adjusted here.
▪
The value of the wheel circumference can be adjusted or reset to the standard-
setting here.
▪
The components used with their version numbers are displayed here.
–
You can find the following menu items here.
▪
You can select your preferred system language here.
▪
You can choose between metric or imperial measurements here.
▪
You can set the time here.
▪
You can select one of the two time formats here.
▪
You can set the display brightness here.
▪
You can reset all of the system settings to the default values here.
– Under the < Information> menu item, you will find the contact details
(
You can leave the settings menu by pressing the button.
Press the button to access the start page.
Maintenance and servicing
Maintenance and cleaning
Do not clean any of the components with pressurized water.
Keep the screen of your onboard computer clean. Dirt can cause faulty
brightness detection.
Clean your onboard computer using a soft cloth dampened only with water. Do
not use cleaning products of any kind.
Have your eBike system checked by an expert at least once a year (including
mechanical parts, and up-to-dateness of system software).
In addition, the bicycle dealer may base the service date on the distance
traveled and/or on a period of time. In this case, the onboard computer
displays a message telling you when the service date is due each time it is
switched on.
Please have your eBike serviced and repaired by an authorized bicycle dealer.
Have all repairs performed only by an authorized bike dealer.
After-sales service and advice on using products
If you have any questions about the eBike system and its components, contact
an authorized bicycle dealer.
For contact details of authorized bike dealerships, please visit www.bosch-
ebike.com.
Transport
- If you transport your eBike attached to the outside of your car, e.g. on a bike rack, remove the on-board computer and the eBike battery to avoid damaging them.
Disposal
The drive unit, on-board computer incl. operating unit, battery, speed sensor,
accessories
and packaging should be disposed of in an environmentally correct manner.
Do not dispose of eBikes and their components with household waste.
In accordance with Directive 2012/19/EU and Directive 2006/66/EC respectively,
electronic devices that are no longer usable and defective/drained batteries
must be collected separately and recycled in an environmentally friendly
manner.
Please return Bosch eBike components that are no longer usable to an
authorized bicycle dealer.
Subject to change without notice.Bosch eBike Systems
0 275 007 3BK | (24.06.2021)
Robert Bosch GmbH
72757 Reutlingen
Germany
www.bosch-ebike.com
0 275 007 3BK (2021.07) T / 51 WEU
Documents / Resources
|
BOSCH BHU3600 Kiox 300 Display Smart
System
[pdf] Instruction Manual
BHU3600 Kiox 300 Display Smart System, BHU3600, Kiox 300, Display Smart System
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>