CertainTeed SPARK-PERF Perforated Joint Tape Instructions
- June 9, 2024
- CertainTeed
Table of Contents
CertainTeed
Marco® Spark-Pert®
Drywall Joint Tape
Instructions
Product Date and Submittal
Product Description
Marco® Spark-Perf® Drywall Joint Tape is a paper tape designed for use with joint compound to reinforce gypsum board joints and corners prior to painting, texturing or wallpapering.
Features and Benefits
- Tape is manufactured from a special fibred paper with added tensile strength to help prevent tearing, wrinkling or stretching
- Joint tape is available in three styles: No Spark (no perforations), Spark-Perf or Slot perforations, which helps to prevent blistering
- Tape is roughened on both sides for superior bonding and holding power
- Tape has precision-matched centre crease for easy and accurate corner applications
- Designed for use with all quality joint and taping compounds available on the market today
Product Data
Material: Fibered Paper
Colour: White
Packaging: See chart on back.
Storage: Tape should always be stored in closed cartons at normal room
temperatures in an enclosed dry area.
Environmental Limitations: When applying drywall joint tape, follow the
printed recommendations of the compound manufacturer. Apply tape only within
their recommended minimum and maximum temperature range. Adequate ventilation
is required to avoid any excess moisture.
Technical References: For additional information on the application and
finishing of Finishing Products please consult:
- ASTM C 475: Standard specification for Joint Compound and Joint Tape for Finishing Gypsum Board.
- ASTM C 840: Standard Specification for Application and Finishing of Gypsum Board.
- GA-214: Gypsum Association publication “Levels of Gypsum Board Finish.”
- GA-216: Gypsum Association publication “Recommended Specifications for the Application and Finishing of Gypsum Board.”
Working with the Product
Application
Designed to be used by both hand and automatic tool applications.
Install gypsum board by following the published Installation Guide. Follow the
printed instructions on the joint compound container for mixing and use of
compound prior to and during the tape application.
For hand taping, apply a first coat of joint compound over the joint with a
four-inch knife. Press the joint tape firmly into the compound by pressing the
knife over the tape. Squeeze out excess compound, making sure that there is
enough joint compound under the tape to ensure a good bond. Allow each coat to
dry thoroughly before applying the next coat. If the tape does lift along the
edges after drying, simply cut out the affected area in the shape of a canoe
before applying the next coat. If the tape lifts in the centre, tear out the
affected area and re-tape. Apply a second and third coat, ensuring that all
joints and fasteners are completely concealed by feathering each subsequent
coat beyond the last. Sand between coats where necessary and finish until a
smooth surface is achieved. Marco® Spark-Perf® Drywall Joint Tape Product Data
and Submittal Continued on back
Job Name………………………..
Contractor……………………….
Date………………………………………..
Products Specified:…………………..
Once primed, the finished interior walls and ceilings can be painted,
wallpapered or textured as desired. Follow all manufacturers’ instructions.
Warranty
Since methods and condition of application such as temperature, humidity and
over thinning are beyond our control, CertainTeed Gypsum, Inc. (CertainTeed)
will not be responsible for the failure of this Product when the Product is
not used according to directions and specifications and accepted standards of
procedure inherent in drywall
application; or when reasonable allowance is not made by the user for adverse
weather and job conditions. However, if this product proves to be defective,
maximum liability shall be limited to replacement of the material only or
refund of the purchase price This shall be the full limit whatsoever of
CertainTeed’s liability. All claims shall be submitted in writing to
CertainTeed within thirty days from the date of discovery. Provincial or
Federal laws may provide rights in addition to this warranty that cannot be
modified or excluded.
2 -1/16″ Wide (52.38 mm)| Style| Rolls Per Carton| Weight
Per Carton| Cartons Per Pallet| Pallet Weight
---|---|---|---|---|---
75′ (23 m)| NO SPARK| 20| 9 lb (4.1 kg)| 140| 1,260 lb (574 kg)
250′ (76 m)| NO SPARK| 20| 26 lb (11.8 kg)| 72| 1,872 lb (849.1 kg)
500′ (153 m)| NO SPARK| 10| 26 lb (11.8 kg)| 80| 2,080 lb (943.3 kg)
75′ (23 m)| SPARK| 20| 9 lb (4.1 kg)| 140| 1,260 lb (574 kg)
250′ (76 m)| SPARK| 20| 26 lb (11.8 kg)| 72| 1,872 lb (849.1 kg)
500′ (153 m)| SPARK| 10| 26 lb (11.8 kg)| 80| 2,080 lb (943.3 kg)
75′ (23 m)| SLOT| 20| 9 lb (4.1 kg)| 140| 1,260 lb (574 kg)
250′ (76 m)| SLOT| 20| 26 lb (11.8 kg)| 72| 1,872 lb (849.1 kg)
500′ (153 m)| SLOT| 10| 26 lb (11.8 kg)| 80| 2,080 lb (943.3 kg)
Drywall Joint Tape is 2-1/16″ (52.38 mm) wide and available in 75′ (23 m), 250′ (76 m) and 500′ (153 m) lengths.
ASK ABOUT ALL OF OUR OTHER CERTAINTEED®
PRODUCTS AND SYSTEMS:
ROOFING • SIDING • TRIM • DECKING • RAILING • FENCE • FOUNDATIONS
GYPSUM • CEILINGS • INSULATION • PIPE
www.certainteed.com
http://blog.certainteed.com
CertainTeed Corporation
P.O. Box 860
Valley Forge, PA 19482
Professional:800-233-8990
Consumer:800-782-8777
© 6-2008 CertainTeed Gypsum, Inc. Rev 4-2012
Printed in Canada on recycled paper. CTG-5001
Documents / Resources
|
CertainTeed SPARK-PERF Perforated Joint
Tape
[pdf] Instructions
SPARK-PERF, Perforated Joint Tape, Joint Tape, Perforated Tape, Tape
---|---
|
CertainTeed SPARK-PERF Perforated Joint
Tape
[pdf] Instructions
SPARK-PERF, Perforated Joint Tape, Joint Tape, Perforated Tape, Tape
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>