VARYTEC 415353 Emergency Kill Switch User Guide
- June 5, 2024
- VARYTEC
Table of Contents
Quick start guide
This quick start guide contains important information on the safe operation of
the product. Read and follow the safety advice and instructions given. Retain
the quick start guide for future reference. If you pass the product on to
others please include this quick start guide.
Safety instructions
Intended use
This device is intended to be used as a portable video light. Any other use or
use under other operating conditions is considered to be improper and may
result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
The danger for children Ensures that plastic bags, packaging, etc. are
disposed of properly and are not within reach of babies and young children.
Choking hazard! Ensure that children do not detach any small parts from the
product. They could swallow the pieces and choke!
Where to use the product Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners, or flammable cleaning agents.
Features
- Emergency kill switch for lasers without an interlock and other devices with protective contact plugs
- 1.4 m input cable and 5.8 m output cable
- Cable cross-section: 1.5 mm²
- Maximum load: 6 A
Operating elements
Using the product
- Connect the device that you want to disconnect from the mains voltage supply with the emergency stop switch to the protective contact coupling of the output cable.
- Connect the protective contact plug of the input cable to a properly wired mains socket that provides the required voltage.
- To trigger the emergency shutdown, press the emergency button of the kill switch.
- To release the switch again after it has been triggered and thereby restore the power supply for the connected device, turn the button of the switch in the direction indicated by the arrows engraved there.
For
the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these
materials with your normal household waste, but make sure that they are
collected for recycling. Please follow the notes and markings on the
packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Thomann GmbH
• Hans-Thomann-Straße 1
• 96138 Burgebrach
• www.thomann.de
• info@thomann.d
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>