VARYTEC 435626 Event Par IP65 4in1 14x8W Thomann United Light Instruction Manual
- June 15, 2024
- VARYTEC
Table of Contents
VARYTEC 435626 Event Par IP65 4in1 14x8W Thomann United Light
Product Information
Specifications
- Product Name: Event Par IP65 4in1 14x8W
- Model: Event Par IP65 4in1 14x8W WDMX
- Type: PAR LED
- Date of Manufacture: 21.09.2023
- ID: 452127, 435626
Description
The Event Par IP65 4in1 14x8W is a high-quality PAR LED light designed for stage and outdoor use. It features a silent operation, making it ideal for environments that are sensitive to noise. The product also comes with an optional W-DMX emitter (reference 573998) for wireless control.
Safety
The Event Par IP65 4in1 14x8W is designed with safety in mind. It is
important to follow the safety guidelines provided in the user manual to
ensure proper usage and avoid any accidents.
Mounting
The Event Par IP65 4in1 14x8W can be mounted using the following instructions:
- Choose a suitable location for mounting the light.
- Ensure that the mounting surface is stable and can support the weight of the light.
- Attach the mounting bracket securely to the surface using the provided screws.
- Align the light with the mounting bracket and slide it into place.
- Tighten any screws or knobs to secure the light in position.
Getting Started
To get started with the Event Par IP65 4in1 14x8W, follow these steps:
**DMX Connections
**
For DMX mode, follow these steps:
- Connect the DMX input of the light to the DMX output of your DMX controller.
- Connect the DMX output of the light to the DMX input of other lights in your setup (optional).
Master/Slave Connections
For Master/Slave mode, follow these steps:
- Connect the DMX output of the master light to the DMX input of the slave light(s).
Remote Control Battery Insertion
To insert the battery into the remote control, follow these steps:
- Open the battery compartment on the back of the remote control.
- Insert the battery with the correct polarity (+/-) as indicated.
- Close the battery compartment securely.
Connections and Controls
The Event Par IP65 4in1 14x8W comes with various connections and controls:
- Power In
- Power Out
- DMX Out
- DMX In
- Menu
- Up
- Down
- Enter
- Pressure Valve Push
Frequently Asked Questions (FAQ)
Can I connect the DMX input and output to audio equipment?
No, you should not connect the DMX input and output to audio equipment such
as mixers or amplifiers. It is recommended to keep the DMX connections
separate from audio equipment to avoid interference and potential damage.
Can I connect the light to a dimmer?
No, the Event Par IP65 4in1 14x8W cannot be connected to a dimmer. It is
designed to be used with its own power supply and control systems.
Germany · www.thomann.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>