PROSCAN PSP1705 Bluetooth Speaker Instruction Manual

PROSCAN PSP1705 Bluetooth Speaker

SAFETY INSTRUCTIONS

FCC WARNING:
This equipment may generate or use radiofrequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

SURGE PROTECTORS:
It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under the warranty for this product.

INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. “Consult the dealer or an experienced radio/TV technician for help.

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.

READ INSTRUCTIONS

1. All the safety and operating instructions should be read before the product is operated.

2. RETAIN INSTRUCTIONS
   The safety and operating instructions should be retained for future reference

3. HEED WARNINGS
   All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS
   All operating and use instructions should be folk lowed.

5. CLEANING
   Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol Cleaners. Use a dry cloth for cleaning.

6. ATTACHMENTS
   Do not use attachments not recommended by the product’s manufacturer as they may cause hazards.

7. WATER AND MOISTURE
   Do not use this product near water-for example near a bathtub, washbowl, kitchen sink or laun dry tub; in a wet basement; or near a swimming pool.

8. ACCESSORIES
   Do not place this product on an unstable cart, stand, tripod, bracket or table.
   The product may fall, causing serious injury and serious damage to the product. Use only with a cart, stand, tripod, back et or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should
   Use a mounting accessory recommended by the manufacturer.

   • An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION
   Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or another similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES
    This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other SOurces, refer to the operating instructions.

11. GROUNDING OR POLARIZATION
    This product is equipped with a polarized alternating-current ine plug (a plug having one blade wider than the other), This plug will it into the power outlet only one way. This is a safety fea- ture. If you are unable to insert the plug fully into the outlet, ty reverse the plug. if the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. POWER-CORD PROTECTION
    Power-supply cords should be routed so that
    they are not likely to be walked on or pinched by
    ftems placed upon or against them, paying par-
    ticular attention to cords at plugs, convenience
    receptacles, and the point where they ext from
    the appliance

13. LIGHTNING
    To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
    This will prevent damage to the product due to lightning and power-line Surges.

14. POWER LINES
    An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it
    can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching SUch power lines or circuits as contact with them might be fatal.

15. OVERLOADING
    Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY
    Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in
    fire or electric shock. Never spill or spray any type
    of liquid on the product.

17. OUTDOOR ANTENNA GROUNDING
    fan outside antenna is connected to the prodUct, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSINFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to grounding electrodes and requirements for grounding electrodes .
    EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

18. SERVICING
    Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards, Refer all servicing to qualified service personnel,

19. REPLACEMENT PARTS
    When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part
    Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK
    Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21. WALL OR CEILING MOUNTING
    The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. DAMAGE REQUIRING SERVICE
    Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions
    a. When the power-supply cord or plug is damaged.
    b. If liquid has been spilled or objects have fallen into the product.
    C. if the product has been exposed to rain or water.
    d. if the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of
    other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
    e. if the product has been dropped or the cabinet has been damaged.
    f. When the product exhibits a distinct change in performance, this indicates a need for service,

23. HEAT
    The product should be situated away from heat sOurces such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat.

24. NOTE TO CATV SYSTEM INSTALLER
    This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
    “WARNING: Cancer and Reproductive harm –www.P65Warnings.ca.gov.

Your Bluetooth Light up Speaker

Features

• Supports profile A2DP
• Supports automatic device pairing
• Wireless range: 30 feet
• Play/pause/pairing button
• Skip forward/back button
• Power on/off button
• Volume control
• Bluetooth/AUXIFM radio source button
• Bluetooth/AUXIFM radio indicator
• Charge indicator
• Light up on/off button
• 3,5mm AUX IN jack for player etc
• Internal rechargeable battery
• DC input for battery recharging
• Light-up LED speaker

Includes

• USB Cable
• User manual

Charging instructions

This unit operates on an internal Li-ion battery that can be recharged either using the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC 5V/500mA and up.

Charging the battery for the first time

1. Charge the internal Lion battery a minimum of 3 hours prior to first use.
   Plug the unit into the USB port on your computer or into a USB power adaptor
   (not included) using the included USB cable.

2. The CHARGER indicator will light red while charging and light green when the unit is fully
   charged. Unplug the USB cable from the power source once the battery is fully charged.

Orientation

Features &Controls

1. SOURCE button
2. POWER button
3. LIGHT button
4. VOLUME knob
5. Previous button
6. Pair/FM scan button
7. Forward button
8. WORKING MODE indicator
9. AUX IN jack
10. DC IN socket
11. CHARGER indicator

Bluetooth operation

External devices that have a built-in Bluetooth feature can connect wirelessly to the Blue
Speaker.
GETTING CONNECTED

1. Power on the unit by pressing the POWER button, WORKING MODE indicator will light blue
   and flash.

2. Set the Bluetooth function of your external device to ON and begin searching for devices.
   NOTE: The effective distance between your external device and this apparatus is 10 meters(30 feet).

3. Once “Pro PSP1705” appears on the paired device list of your external device, select it.

4. if you are asked for a password, enter ‘0000″.

5. A Bluetooth connected message will be heard and the WORKING MODE indicator light blue
   steadily that indicates a connection has been established.

6. A few seconds later your Bluetooth connection should be ready to use.

PLAYING MUSIC FROM AN EXTERNAL BLUETOOTH DEVICE

1. Follow the ‘” GETTING CONNECTED’ steps above to pair your external device.

2. Turn on the music player program on your external device and set to play. Normally, you can control music playback with the  buttons on the Bluetooth Speaker.

3. Audio played through the connected Bluetooth Device will now be heard through the
   Speakers.

4. Adjust the VOLUME knob to obtain the desired volume level.

5. Press the POWER button to turn off the unit.

LED light-up operation
This device is a built-in random color LED light-up function for the speakers.
Press the POWER switch to turn the unit ON and then press the LIGHT button to turn on/off
the LED light for the speakers.

Radio operation

This device is a built-in FM radio function.

1. Press POWER switch to turn the unit ON and then press the SOURCE button twice to
   select the FM radio mode.
   SOURCE Button sequence – Bluetooth-> AUX -> FM Radio

2. Under the FM radio mode, press the PLAY button in 3 seconds to start AUTO SCAN
   all available FM radio stations.

3. Press the Previous/ Forward button for tuning the previous or next scanned radio
   stations.

AUxiliary 0peration

External (auxiliary) audio sources such as tablets smartphones or MP3 players can connect to the
Bluetooth Light up Speaker via auxin.

1. Press the POWER switch to turn the unit ON and then press the SOURCE button to select the
   WORKING MODE indicator light red (AUX mode),

2. Set the volume to the minimum level with the VOLUME knob.

3. Plug in an AUX-IN cable into the AUX IN jack on the top of the unit

4. Plug the other end of the cable into the headphone or Line-Out jack of the external source.

5. Tum on the external audio device and set it to play. Tum the external audio device’s volume up to
   2/3.f necessary, adjust the volume on the main unit by tuning the VOLUME knob .

Specification

Power Requirement:

• DC input: DC 5V—500mA (Micro USB)

• Battery: built-in rechargeable lithium battery

• Bluetooth: Pro PSP1705
  Support profile A2DP

• Audio Power output: 3W x2

• Speaker: 5W 2 Ohms 3 inch x 2

• Dimensions: 24.1 cm(H) x 42.1 cm(W) x 24.3 cm(D)

• Frequency range: FM 87.5-108MHz

Trouble Shooting

To make a warranty claim, please email support@curiscs.com or call 1-800-968-9853.
90-day Warranty
This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no
longer available, we will replace it with a similar one of equal or greater value. Prior to cement Doing sent, tne product must be rendered inoperable or returned warranty does not cover glass, Tilters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase, is required to make a warranty claim. This warranty is void if the product IS used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V-60Hz).
We exclude all claims for special, incidental, and consequential damages caused by a breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, Is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.
ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS
REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you contact the Support
Team:

• Name, address, and telephone number.
• The model number and serial number.
• A clear, detailed description of the problem.
• Proof of purchase including dealer or retailer name, address and date of
  purchase.

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>