TITAN GM 3600 Air Assisted or Airless Spray Gun Instruction Manual

: June 5, 2024
: Titan

Table of Contents

INTRODUCTION
- TECHNICAL DATA
SPARE PARTS DIAGRAM
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

OPERATING MANUAL
GM 3600TM
AIR ASSISTED / AIRLESS SPRAY GUN

|
---|---

MODELS: 2404548, 2412194

1020 • Form No. 2412343B / Doc. # 11308464

INTRODUCTION

In the air-assisted/airless spraying process, the spraying material is atomized at pressures between 400 – 1800 PSI (3 – 12.4 MPa). The atomizing air at 7 – 32 PSI (0 – 0.22 MPa) produces a soft spray jet that eliminates problems of overlaps in the boundary zone. The soft spray jet prevents the spraying material from rebounding to the gun. The form air reduces or increases the spray jet width, depending on the adjustment of the air adjustment knob. Due to the cleaning-friendly design of the tip and the lack of air holes near the material outlet, the tip is virtually self-cleaning.
When the trigger of the gun is pulled, the air valve opens allowing atomizing and fan jet air to flow up to the tip. The material valve opens only when the trigger is pulled to its fullest extent.
The amount of air for the spray jet width is adjusted using the air adjustment knob. The air input should be adjusted at the source to approximately 0 – 32 PSI (0 – 0.22 MPa).

|
---|---

ADVANTAGES OF THE ADJUSTABLE AIR ASSISTED/AIRLESS PROCESS:

high coverage capability
low overspray
fine finish
adjustability of spray pattern width

MATERIALS THAT CAN BE SPRAYED USING THIS GUN INCLUDE:

Water, oil, and solvent based primers and topcoats
Fine finishing enamels and automotive coatings
Release agents

TECHNICAL DATA

Maximum air input pressure	115 PSI (0.79 MPa)
Maximum working pressure	3600 PSI (24.8 MPa)
Air connector	QD Nipple
Material connector	NPSM 1/4”
Filter, standard	100 mesh (see chart on page

SPARE PARTS DIAGRAM

FLAT TIP SPRAY GUN

P/N 2412194

#	GM 3600	Description	Qty.
1	286480	Rear cap	1
2	9894283	Spring	1
3	9894282	Spring	1
4	2311320	Gun packing kit (includes items 5-7)	1
5	286471	Fitting	1
6	286472	Gasket	1
7	286473	O-ring	1
8	286476	Trigger	1
9	286484	Nut	1
10	9832127	Pin	1
11	286474	Trigger lock	1
12	394612	Fitting	1
13	508422	Air fitting	1
14	9805405	Screw	1
15	286475	Support bracket	1
16	89959	Filter, 100 mesh, yellow	1
17	2369296	Air valve assembly (includes item 18-19)	1
18	286491	O-ring	1
19	9822555	Clip	1
20	286483	Screw	1
21	286481	Seal	1
22	286238	Filter housing	1
23	286462	O-ring	1
24	286233	Valve seat housing	1
25	286479	Seal	1
26	286478	Tip gasket	1
27	286492	Filter body	1
28	286490	Seal	1
29	43590	Spring	1
30	538205	Swivel fitting	1
31	526209	AirCoat tip ACF 9/20 (see page 36
for Flat Tip Chart)	1
32	394960	Air cap	1
33	394962	Tip guard	1
394965	Tip guard with air cap (includes
item 32)	1

REVERSIBLE TIP SPRAY GUN
P/N 2404548

#	GM 3600	Description	Qty.
1	286480	Rear cap	1
2	9894283	Spring	1
3	9894282	Spring	1
4	2301252	Gun packing kit (includes items 5-7)	1
5	286471	Fitting	1
6	286472	Gasket	1
7	286473	O-ring	1
8	286476	Trigger	1
9	286484	Nut	1
10	9832127	Pin	1
11	286474	Trigger lock	1
12	349612	Fitting	1
13	508422	Air fitting	1
14	9805405	Screw	1
15	286475	Support bracket	1
16	89959	Filter, 100 mesh, yellow	1
17	2369296	Air valve assembly (includes item 18-19)	1
18	286491	O-ring	1
19	9822555	Clip	1
20	286483	Screw	1
21	286481	Seal	1
22	286238	Filter housing	1
23	286462	O-ring	1
24	286233	Valve seat housing	1
25	286479	Seal	1
26	286478	Tip gasket	1
27	286492	Filter body	1
28	286490	Seal	1
29	43590	Spring	1
30	538205	Swivel fitting	1
31	394965	Tip guard	1
32	695-415	Spray tip, TR-1 415 (sold separately; see page 37 for complete
Titan tip listings)	1

FLAT TIP CHART

Part Number| Designation| Orifice Diameter (in.)| Angle| Recommended Filter
---|---|---|---|---
526209| 9-20| 0.009| 20| 180 Mesh Filter (red)

100 Mesh Filter (yellow)

50 Mesh Filter (white)

526409| 9-40| 0.009| 40
526111| 11-10| 0.011| 10
526211| 11-20| 0.011| 20
526411| 11-40| 0.011| 40
526113| 13-10| 0.013| 10
526213| 13/20| 0.013| 20
526413| 13/40| 0.013| 40
526115| 15-10| 0.015| 10
526215| 15/20| 0.015| 20
526415| 15/40| 0.015| 40
526217| 17/20| 0.017| 20
526417| 17/40| 0.017| 40

GM 3600

Documents / Resources

| TITAN GM 3600 Air Assisted or Airless Spray Gun [pdf] Instruction Manual
GM 3600, Air Assisted or Airless Spray Gun, GM 3600 Air Assisted or Airless Spray Gun
---|---