eta x519-10 Avanto Bag Vacuum Cleaner Instruction Manual

eta x519-10 Avanto Bag Vacuum Cleaner

SAFETY WARNING

GENERAL PROVISIONS:

• Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
• This appliance may only be used by children aged 8 years or older, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children younger than 8 years must be kept out of reach of the appliance and its power cord.
• Before replacing accessories or any accessible parts that move while using, before assembly and disassembly, before cleaning or maintenance, when you let the appliance unattended or if you finish the work with the appliance, switch off the appliance and disconnect it from the mains by unplugging the power cord plug from electrical socket.
• To prevent injury, do not touch the rotating brush with your hands/fingers.
• The appliance is designated to be used indoors only.
• Never immerse the appliance in water (not even partially) and do not wash it under running water!
• When vacuuming certain types of carpets, upholstering fabric, etc., static electricity may be produced. No static electricity discharge is dangerous to health.
• Do not put fingers or other things to input and output vents of the appliance.
• In order to ensure the safety and proper function of the appliance, use only original spare parts and accessories approved by the manufacturer.
• Only use this appliance for the purpose it was designed for, as specified in this manual.
• The manufacturer is not responsible for damage caused by improper use of the appliance and the accessories and its warranty for the appliance does not apply in situations when the safety warnings above are not complied with.

USE OF THE APPLIANCE

• The product is only intended for home use and similar purposes (in shops, offices and similar workplaces, at hotels, motels and other residential environments, and in facilities providing bed and breakfast). It is not intended for commercial use!
• Avoid contact with the rotating brush when handling the vacuum cleaner (e.g. with loose clothes, hair, fingers, jewellery, bracelets etc.).
• The appliance must not be used in damp or wet environment and in any environment with the danger of fire or explosion.
• Do not use the appliance to vacuum water, liquids or aggressive fluids!
• Do not vacuum wet or moist floor coverings, and do not use the vacuum cleaner outdoor!
• Do not vacuum sharp objects (e.g. glass, shatter), hot, flammable, explosive items (e.g. ash, hot cigarette butts, gasoline, thinners and aerosol vapours) or greases (e.g. fats, oils), caustic agents (e.g. acids, solvents).
• The paper or synthetic bags are disposable which means that once they are foul, they cannot be cleaned and re-used! If the paper or synthetic bag is cleaned mechanically, it can damage, besides other things, the inner filtration layers which results in a loss of filtration and mechanical properties of the bag.
• Do not use the vacuum cleaner to vacuum dirt produced during/after construction such as plasterboard dust, fine sand, cement, dust from construction, parts of plaster etc.

ACCESSORIES AND ASSEMBLY OF THE APPLIANCE

• Do not use the brush for treatment and cleaning animal hairs!
• Do not leave the floor nozzle with the rotation brush on in one place for too long! It could cause damage to the surface vacuumed!

POWER CABLE:

• Check whether the data on the type label corresponds with the voltage in your socket. The power cord plug may only be connected to the electrical socket complying with the applicable standards.

• If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person.

• Always disconnect the appliance from power by unplugging
  the power cord from the electrical socket, if the appliance is left unattended and before assembly, disassembly or cleaning.

• Never use the appliance if the power cord or power plug are damaged, if the appliance is not correctly operating or if it has fallen on the floor and been damaged, or if it has fallen into water.

• Do not apply force to unwind the cord beyond the red mark.

• Do not unplug the power plug by pulling the power cord or the vacuum cleaner unit.

• When winding the cord, hold the plug to prevent lashing of the cord around and to prevent possible injury.

• The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges.

EQUIPMENT AND ACCESSORIES

• A1 – ON/OFF ( ) button
• A2 – power cord winding button
• A3 – knob for suction power regulation
• A4 – suction vent
• A5 – lid
• A6 – lid lock
• A7 – accessories compartment cover
• A8 – full bag indicator
• A9 – handle
• A10 – depression for attachment of accessories
• A11 – power cord
• A12 – plastic fixture for the dustbag
• A13 – dust filter (ETA HYGIENIC)
• A14 – grille of the suction filter
• A15 – suction filter
• A16 – exhaust grid
• A17 – output HEPA filter

accessories

• B1 – floor nozzle
• B2 – turbo-brush
• B3 – small turbo-brush
• B4a – parquet nozzle
• B4b – Premium parquet nozzle with flexible joint
• B5 – nozzle for vacuuming of animal hair
• B6 – upholstery nozzle
• B7 – brush
• B8 – crevice nozzle
• B9 – Long crevice nozzle
• B10 – suction hose
• B11 – mechanical suction power regulator
• B12 – telescopic suction tube
• B13 – telescopic suction tube locking

VACUUM CLEANER PREPARATION

Remove all packing material, take out the vacuum cleaner and the accessories. Remove all possible adhesion foils, stick-on labels or paper from the appliance.

VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in .
Choose appropriate accessories as required (B1-B9) (. The telescopic suction tube B12 can be set to an optimum length to suit the user´s height.

USE OF VACUUM CLEANER

Before use, unwind (by pulling) the power cable A11 from the vacuum cleaner to a required length and plug the vacuum cleaner to the mains.

CONTROL

REPLACEMENT OF THE DUSTBAG AND FILTERS

DUSTBAG REPLACEMENT
Full bag indicator
If the A8 indicator is permanently coloured, the dustbag needs to be replaced. If the indicator is activated occasionally when you are vacuuming, you can ignore it..
To remove the dustbag, follow the procedure indicated in . To fit a new dustbag
in the vacuum cleaner, proceed in reverse order.
Spare bags: ETA960068000; ETA960068010; ETA960068020;

INPUT FILTER REPLACEMENT
To remove the input filter, follow the procedure indicated in . To fit a new input filter in the vacuum cleaner, proceed in reverse order. A used filter is to be disposed of with regular household waste.

OUTPUT FILTER REPLACEMENT
To remove the input filter, follow the procedure indicated in  To fit a new output filter in the vacuum cleaner, proceed in reverse order. A used filter is to be disposed of with regular household waste.

CLEANING AND MAINTENANCE

Caution

• Maximum suction performance can be achieved when the filters are clean and the dustbag is empty.
• When you have replaced the dustbag about five times, the filters need to be cleaned, or replaced.
• When you are vacuuming very fine dust, the dustbag and filter pores might get clogged. This reduces the air flow and deteriorates the suction performance. In such a case, the dustbag needs to be replaced as soon as possible (even though it might not be full yet) and the filters must be cleaned or replaced.
• Used dustbags and filters are to be disposed of with regular household waste.

Treat surface of the appliance with a soft and damp cloth, do not use coarse and aggressive detergents!

Accessories
After any vacuuming it is recommended to check visually the brushes or collectors for possible impurities. If there are some impurities, remove them.

Cleaning the TURBO nozzle B2
Cut the threads and hairs with scissors. Turn on the vacuum cleaner. The cleaner vacuums the cut hairs and threads. In case hairs or threads got tangled up around the attachment of the brush cylinder and cannot be removed with the above-mentioned steps, it is necessary to remove them with a suitable tool (e.g. tweezers). For simpler and more comfortable maintenance, remove the upper cover by releasing the locking latches on the sides. At the same time, make sure no dirt is stuck on the inner side of the nozzle (i.e. turbine). Release the two arrest latches on the bottom side of the nozzle in the direction of the arrow and remove the cover. Clean the space with a suitable tool (e.g. tweezers). Insert the covers back into the nozzle reversely and close it with by folding it up (you hear an audible click).

Input and output filters
Rinse the input filter A15 under running water. Allow them to dry out properly before their re-use. Shake out the input HEPA filter A17 gently, or blow it out. If the HEPA filter is very dirty, you can rinse it under running lukewarm water. Allow it to dry out properly.

ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal of the product, hand it over at special collection places where it will be taken over free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authority or at the local waste collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation, we recommend its cutoff after disconnecting it from power supply and in this way it will not be possible to use the appliance again.

TECHNICAL DATA

The manufacturer reserves the right to change the technical specifications and accessories for the respective models. Replacement of parts that require intervention in the electric part of the appliance must be carried out by a specialized service! Failure to comply with the instructions of the manufacturer will lead to the expiration of the right to guarantee repair!

References

• AEG Hausgeräte | Setzen Sie auf Qualität | AEG
• ETA - tady je doma
• ETA - tu je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>