PowerColor AXRX 5700 XT 8GBD6-3DHE Red Devil ATX Video Card Installation Guide

: June 5, 2024
: PowerColor

Table of Contents

Quick Installation Guide
Addressable RGB (ARGB) LED Cable Connection
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AXRX 5700 XT 8GBD6-3DHE Red Devil ATX Video Card
Installation Guide

Quick Installation Guide

Package Contents

Graphics Card
User’s Manual

System Requirements

Expansion Slot: Motherboard with one or more PCI Express x16 slots.
Display: Monitor or another display device with compatible connectivity to the output interface of your graphics card.
Power requirement: Power Consumption differs by model.
(For additional support details, please refer to: www.powercolor.com/ to calculate your minimum
Operation System: Linux©/Windows® 10 (For additional support details, please refer to: https://www.amd.com/en/support)

Hardware Installation

Turn off the computer, switch off the PSU, and disconnect the power cord.
Open the case.
Remove any existing graphics card (if applicable) or PCI-E slot covers.
Insert the Graphics Card into the PCI-E slot.
Make sure seating is secured with the PCI-E locking mechanism in place.
Secure the graphics card to the PCI-E bracket with a thumbscrew.
Plugin the required external PCI-E power connectors (if applicable) from the appropriate PC Power Supply Unit.
Close the case.
Connect the display cable to the corresponding GPU display output port.
Power on System, booting to OS. (Removing all drivers for your previous card and performing a clean install of the new drivers is recommended.)

Driver Installation

Please download the driver.
Install the driver based on your product.
Execute the driver and follow the instruction.

Driver Installation Link
Driver for PowerColor https://www.powercolor.com/downloads
Driver and Support for AMD https://www.amd.com/en/support

A. Additional Support (Optional)
**※**If the graphics card has multiple BIOS switches, you can switch to your personal preference.

Confirm that the computer is powered off and switch the BIOS you want.
Reboot your PC. (For additional support details, please refer to: https://www.powercolor.com/ for specific model support)

B. AMD Radeon Setting Software Installation
To take full advantage of the features and capabilities of your Radeon Graphics products, installing the most up-to-date Radeon Software is recommended.

Radeon WattMan: Take your gameplay to the next level by fine-tuning your GPU voltage, engine clock, memory clock, fan speed, and temperature.
Radeon™ ReLive: Capture, stream, and share your greatest moments. (For more support, visit: https://www.amd.com/en/support/driverhelp)

※Requires downloading the “AMD Settings” software included when installing the driver AMD/Radeon driver.

Addressable RGB (ARGB) LED Cable Connection

Connect the ARGB LED cable to the ARGB LED Headers between the PowerColor graphics card and your motherboard, the PowerColor LED light can be controlled by PowerColor Devil Zone software or synchronized via the motherboard software.
***** The factory default setting is controlled by PowerColor Devil Zone, if you want to sync with motherboard software, please disable GPU control on Devil Zone.
You can also connect another ARGB device to the male connector for syncing with motherboard ARGB control.

*** The ARGB LED Header supports ARGB LED cable, with a maximum power rating of 3A (5V) and a total length of 2 meters.
Notices:**
– Do not install an RGB LED cable in the ARGB LED Header; otherwise, the hardware and cable may be damaged.
– Only use the ARGB LED cable to connect on both motherboard and PowerColor graphics card.
– PowerColor graphics card is compatible with motherboards that have headers for ARGB LED cables. The headers should have the 3-pin configuration. For further information concerning compatibility, refer to the manual of your mainboard, or visit the manufacturer’s website.
– To avoid damaging any hardware, please make sure the system is turned off and the power cord is unplugged before connecting or removing the ARGB LED cable.

http://www.powercolor.com