PowerColor RX 6800 XT Liquid Devil AMD Radeon Installation Guide
- June 5, 2024
- PowerColor
Table of Contents
LIQUID DEVIL
Quick Installation Guide
The image is for reference only; actual display is based on the real product.
Quick Installation Guide
Before you start using this product please follow these basic guidelines:
Please carefully read the manual before beginning the installation process!
The use of corrosion inhibiting coolants is always recommended for any liquid
cooling system.
Do not use pure distilled water!
Make sure to thoroughly bleed air out of your water block, or you will not
reach optimal performance!
-
Screw in the two G1/4 threaded male fittings.
-
Attach the liquid cooling tubes and connect the water-block(s) into the cooling circuit.
To ensure that the tubes are securely attached to the barb/fittings, please use hose clamps or an appropriate substitute. -
Do not forget to plug the remaining two opening with enclosed G1/4 or equivalent.
-
You can use any opening as an inlet/outlet port.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>