Bluetooth 5.0 True Wireless Earbuds Headphones with Charging Case-Complete Features/USer Manual

: June 5, 2024
: GPED

Table of Contents

GPED

GPED

Bluetooth 5.0 True Wireless Earbuds Headphones with Charging Case

Bluetooth-5.0-True-Wireless-Earbuds-Headphones-with-Charging-Case-
imgg

Specifications

DIMENSIONS: 2 x 2 x 0.8 inches
WEIGHT: 0.64 ounces
OPERATION RANGE: 30 feet
TALK TIME: Up to 6 Hours
PLAYING TIME: Up to 3 Hours
CHARGING TIME: 1 Hour
BATTERY CAPACITY: 100mAh
WATERPROOF RATING: IP67
BRAND: GPED

Introduction

The GPED wireless earbuds feature a Bluetooth version of 5.0. These earbuds have the ability to work in mono and dual-mode. They have the feature to automatically turn on and pair with one another. The charging case of the battery features 4 times fully charging by the charging case. Once the earbuds are fully charged, they support a playtime of 5 hours. Bluetooth 5.0 provides advanced and more stable connectivity without any distortion in the transmission of sound. They are simple to use and don’t require any complicated steps to be followed to connect them to your device. They have a waterproof rating of IP67. These means are perfect to be used while jogging, hiking, yoga, running, skiing, etc.

They feature a built-in mic that allows you to answer calls and attend meetings. It also has a noise isolation feature. The sound produced by these headphones is powerful due to the A2DP/AVRCP audio processing system. These headphones are compatible with all Bluetooth enabled devices.

What’s in the Box?

2 x Bluetooth Headset
2 x Ear Tips (S/M/L)
1 x Magnetic Charging Box
1 x USB Cable
1 x User Manual

How to pairing those two headsets?

Step 1 : To begin, press and hold the button on either earbud for 3 seconds, then release when the LED flashes between Red and Blue. (Power on – Paring) (Voice Notice)
Step 2: Open the Bluetooth app on your phone and search for “Air Headset,” then connect it.
Step 3: Pair the earphone with your phone; after pairing, the device will be in standby mode; the blue LED will blink 5 seconds each time. (Connected Voice Notice)

How to answer an incoming call?

To answer an incoming call, press the function button once; to refuse, press the function button twice (When at the calling mode, only master earbud has sound, this safety feature allows you to hear the traffic While driving.)

Note:

Please attempt to restore the default configuration if just one earbud has sound in music mode.
When you receive this item and use the Earbuds for the first time, the battery life may be limited since we test them before shipping them out, which incurs a cost. Please don’t be concerned. They may be charged and will perform as intended.

FREQUENTLY ASKED QUESTIONS

Are the earbuds water-resistant?
Yes, the earbuds have a waterproof rating of IP67.
Can I use them to talk on the phone?
Yes, they feature a built-in mic to answer calls.
Can this be used with iPhone 7?
Yes, they are compatible with iPhone 7.
Do they have noise cancellation?
Yes, they feature noise cancellation.
Are these compatible with Xbox one?
They are compatible with all devices that feature Bluetooth.
How is the mic on Bluetooth earbuds for phone calls?
The mic on the earbuds is impressive and allows clear voice without any trouble.
Can an AirPod silicone cover fit on this?
No, it can’t.
Do they work with old iPhone SE?
Yes, they work with any device that features Bluetooth.
Batteries required?
No, they don’t require batteries, they are charged using the charging case.
Do they work with android?
Yes, they work well with Android devices.
Will they work with Windows 10?
Yes, if your device has Bluetooth, they will work fine