Kongw AB-137145 Mole Removal Pen Mole Remover Beauty Skin Machine with LCD Display Instructions
- June 5, 2024
- Kongw
Table of Contents
Kongw AB-137145 Mole Removal Pen Mole Remover Beauty Skin Machine with
LCD Display
MOLE REMOVAL PEN INSTRUCTIONS
Carbon-ionization Technology
Featuring carbon-ionization technology, this mole removal pen can safely, effectively, and bloodlessly remove moles and freckles without the uncomfortable feeling of receiving an electric shock.
- Plasma micro district discharge technology
- (2-10 weeks of full recovery)
Advanced UV Lamp
- UV lamp on the pen point helps to disinfect, a much safer and more efficient way to remove moles without much pain or bleeding.
- The ultraviolet(UV) treatment process is an extremely quick physical process.
2 Different Needles
- If the moles and freckles are relatively large, the coarse and fine needles can be used alternatively.
- Fine needle (for one-time use): applicable to relatively small moles and freckles.
- The fine needle is featured with slow removal speed and slight pain but a relatively clean removal effect.
Level Selection 1-4
- Skin vegetations
- Fatty grains
- Freckles
- Age spots
. - Coarse needle (for repeated use): applicable on large moles, warts and so on.
- The coarse needle is featured by the fast removal speed and relatively low pen, Apply the fine needles to the remaining small freckles after applying with coarse needles.
Level Selection: 5-8
- Warts
- Verruca
- Tattoos
- Larger moles & freckles
- Keep out of the reach of children.
- For pain-sensitive patients, they can apply the eye and brow stabilizing cream and then cover with plastic wrap. After 15-30 cream, wipe off the cream and then remove the freckle with a removal pen.
- For first-time users, it is recommended to test the device on the back of your hand before using on a sensitive, delicate area.
- Decrustation happens generally after 4 to 10 days, and it is normal if there is temporary skin erythema or pigment at the operation area. To prevent aggravated pigmentation, please avoid exposure to strong sun within 3 months of treatment.
- Do not eat spicy food, drink wine or take aspirin similar drugs within one week after the freckle removal.
- Do not take the strenuous exercise within one week after the freckle removal.
- Do not contact water before scab and you could wipe skin by dry towel but avoid treatment area.
- If necessary, it is recommended to appro- priately apply the cell repair solution to protect the skin at the treatment area.
- Do not pick off the scabs left by the blemish treatment. Be patient and let nature take its course.
Precautions For Use
- Keep out of the reach of children.
- For pain-sensitive patients, they can apply the eye and brow stabilizing cream and other cover with plastic wrap. After 15-30 cream, Wipe off the cream and then remove the freckle with removal pen.
- For first-time users, it is recommended to test the device on the back of your hand before using on a sensitive, delicate area.
- Decrustation happens generally after 4 to 10 days, and it is normal if there is temporary skin erythema or pigment at operation area. To prevent aggravated pigmentation, please avoid exposure to strong sun within 3 month of treatment.
- Do not eat spicy food, drink wine or take aspirin similar drugs within one week after t freckle removal.
- Do not take the strenuous exercise within one week after the freckle removal.
- Do not contact water before scab and yo could wipe skin by dry towel but avoid treatment area.
- If necessary, it is recommended to appropriately apply the cell repair solution to protect the skin at the treatment area.
- Do not pick off the scabs left by the blemish treatment. Be patient and let nature take its course.
Remove spot
For removing spot, please place the mole removal touching the spot slightly, gently sweep back and forth, it can be clearly found that melanin will burn and fall off. For a small spots, it can be removed only one time. For the dak spot, it’s kindly suggested that carbonizing for 2-3 times. The customer should keep still, and the cosmetologist’s hand which hold the device should keep balanced during the using process, otherwise it ill cause burning, it also affects the WOund recovery, resulting in the scar,
Remove dot mole
When removing dot moles, please pay attention to distinguishing the extent of
moles. Some moles grow on skin epidermis, while others are shallow. Do not
pierce the surface of the mole at once, it’s better to burn in a small
area.For the bad mole, please avoid inflammation of the wound after treatment,
it’s preferred to put some numb cream before 2-3 days of the wound get
recOvery. Note: Stop using numb cream if the wound is inflamed.
Remove granulation
Please lightly touch the granulation with pen tip to burn the derived
granulation cells. They will automatically fall off over one week.For the
small granulation, it can be removed only one time, while multiple operations
to remove the bad granulation in large area, avoid the wound recovery.
Remove tattoos
Normally the tattoo area is large and you should choose a coarse needle. The
way of removing tattoos is similar to that of removing spots. It is
recommended to deal withmultiple times for large areas (Over 3 cm)to ensure
good effect and safety. For severe inflammation, please immediately treat in
hospital. Note: For our mole remover machine, only small tattoos would be
recommended, for large ones, it’s better to treat on hospital or cosmetologist
for professional removal.
Operation Steps
- Choose the appropriate needle and instal it on the pinpoint.
- Long press ON/OFF button for about 2s to power the pen on. The LCD display lights up after the power is on.
- You could disinfect the treatment area by UV lamp. To turn the UV light on and off during operation, press ON/O Consecutive times and the icon on the top left corner lights up, showing that the UV lamp is working.button for 2
- After startup, click the ON/OFF button to Switch the speed level.
- Press and hold OUT button to start working. The LCD screen will display the electric ion output and icon flashes to show the output of the electric ion is normal. Release the button to stop working.
- After use, press the power button for 3s to turn off the pen and the LCD screen will be off.